• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.252-255
• /
• 2010

본 논문에서는 적외선 LED BAR를 기반으로 하여 3D 입체 영상을 이용하면서 다양한 터치 인터랙션이 가능한 대규모 인터랙티브 디스플레이 시스템을 제안한다. 제안하는 IR LED BAR를 이용하여 입체 영상의 느낌을 느낄 수 있는 스크린과 떨어진 공간에 인터랙션 막을 생성 한다. band pass filter를 장착한 적외선 카메라를 통하여 실시간으로 영상을 획득한다. 획득되어진 영상은 영상처리모듈을 통하여 터치 인터랙션 좌표 정보를 구하고 packet으로 저장한다. 네트워크 데이터 통신을 통하여 packet을 server로 보내며 server에서 메타포 분석 모듈로 packet을 분석하고 메타포 이벤트로 저장하여 콘텐츠에 보낸다. 콘텐츠에서는 실시간으로 메타포 이벤트 결과를 실행하여 입체 영상에서 터치 인터랙션이 사용 가능하도록 한다. 그로 인하여 직접 스크린을 터치하지 않아도 시스템과 터치 인터랙션이 가능하게 됨에 따라 3D 입체 영상을 이용하면서 터치 인터랙션이 가능하게 되었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.229-233
• /
• 2003

Theodolite measurement system is non-contacted 3-dimensional measurement system. The system accuracy is 0.5 mm or better for distance 0 ~ 100m. And the system is used for a product of middle and large scale. This study is performed for the measurement uncertainty of the system. We could know that the main uncertainty factors are temperature, illumination and skill. And, we perform the study for the effect according to the height difference of scale bar. And, we calculated the measurement uncertainty with those factors.

• Journal of Welding and Joining
• /
• 제27권3호
• /
• pp.52-59
• /
• 2009

Flash butt welding is applied in many industries. New technology was developed recently for joining billets which called "EBROS (Endless Bar Rolling System)". After reheating billets in furnace, two billets were joined using flash butt welding. The objective of this study was to investigate the effect of alloying elements on mechanical properties of flash butt welded zone of hot rolled steel bar. The tensile properties on welded zone of Fe-Mn steel and Fe-Mn-V steel were dropped as compared with non-welded zone. Fe-Mn-Nb steel was opposed to the former. It was found that the white band at the welded zone had high ferrite volume fraction and large ferrite grain size. The vertical white band between flash butt welded billets was transformed into an arrowhead it of steel bar. According to this band, softening has been appeared. There was a interesting phenomenon with HAZ of Fe-Mn-Nb Steel, 40nm scale of particles were observed and hardness of HAZ was higher than non-welded zone.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.169-174
• /
• 2003

The thermal design of the bus bar of a Gas-Insulated Switchgear(GIS) becomes important since the current-carrying capacity of the GIS is limited by maximum operating temperature. In order to predict temperature rise of the bus bar, a program has been developed. Various heat sources possibly generated in the bus bar are calculated in the program. To estimate temperature rises at the bus bar caused by the heat balance between the heat generation and heat transfer, the finite volume method as well as the $4^{th}$ order Runge-Kutta method has been employed. In the experiments, temperature rises at conductor, contact part and external tank are measured for full-scale gas-insulated bus bars. The comparisons of the predicted values of the heat balance calculation to those of the experiments are made. From the comparisons, it is concluded that the developed program can predict the temperature rise of the bus bar quite well.

• Structural Engineering and Mechanics
• /
• 제83권6호
• /
• pp.799-810
• /
• 2022

This study investigated the effect of the strengthening efficiency of unbonded steel-bar truss system on the out-of-plane behavior of perforated masonry walls. Four full-scale unreinforced masonry (URM) walls with two different planes were prepared using the unbonded steel-bar truss system and a URM walls without strengthening. All masonry walls were tested under constant axial and cyclic lateral loads. The obtained test results indicated that the pinching effect in the out-plane behavior of masonry walls tends to decrease in the in- and out-of-plane strengthened URM walls using the unbonded steel-bar truss system with the higher prestressing force ratio (R_p) of vertical reinforcing bars in the unbonded steel-bar truss system, regardless of the perforated type of the masonry wall. Consequently, the highest maximum shear resistance and cumulative dissipated energy at peak load in the post-peak behavior were observed in the in- and out-plane strengthened URM walls with the highest R_p values, which are 2.7 and 6.0 times higher than those of URM. In particular, the strengthening efficiency of the unbonded steel-bar truss system was primarily attributed to the vertical prestressed steel-bars rather than the diagonal steel-bars, which indicates that the strains in the vertical prestressed steel-bars at the peak load were approximately 1.6 times higher than those in the diagonal steel-bars.

• 한국화재소방학회논문지
• /
• 제25권3호
• /
• pp.51-56
• /
• 2011

도로터널에서의 미분무수 소화시스템의 화재진압 특성을 조사하기 위해 실물 터널 화재 실험을 수행하였다. 적용된 소화시스템은 압력이 3.5 bar인 저압 물분무 소화설비와 60 bar인 고압 미분무수 소화시스템이다. 미분무수 소화시스템은 물분무 소화시스템의 1/6 만큼의 소화용수량을 사용한다. 화원 (fire source)은 실물 승용차와 유류화재를 모사한 화원면적 $1.4m^2$의 헵탄 연료 팬 화재로 구성하였다. 터널 내의 환기조건을 구현하기 위해 실물모형 터널의 한쪽 끝단에 유속(0.9~3.8 m/sec 범위) 발생장치를 설치하였으며, 화원에서 하류 방향으로 터널 내 온도분포는 K-type 열전대 트리를 사용하여 측정하였다. 실험 결과 고압 미분무수 소화시스템은 B급 화재의 경우 저압 물분무 시스템과 동등한 수준의 냉각효과를 보였다.

• 혜화의학회지
• /
• 제18권1호
• /
• pp.101-107
• /
• 2009

Objectives: The purpose of this study is to show a case of patient with dysfunction of autonomic nervous system improved by oriental medical treatment. Methods: This patient was 66 year-old woman who complained pantalgia including abdominal pain and headache, cold sweating, anxiety, palpitation and fatigue. She was treated by herbal medicine(加味溫膽湯 $ji\bar{a}w\grave{e}iw\bar{e}nd\breve{a}nt\bar{a}ng$), acupuncture, moxa and aroma therapy. We used VAS(Visual analogue scale) to measure the progress of symptoms. Results : The symptoms of dysfunction of autonomic nervous system was improved after oriental medical therapy. Conclusions : This study suggests that oriental medicine therapy is effective in the trearment of dysfunction of autonomic nervous system.

• 한방안이비인후피부과학회지
• /
• 제27권1호
• /
• pp.130-139
• /
• 2014

Objectives : This is a clinical report on a 27-year-old patient with Multi-patched Alopecia Areata(AA) assumed to be occurred by chronic lymphadenopathy, and treated by oriental medicine treatment. Methods : The patient was treated by herb medication and acupuncture. The improvement of the patient was judged by magnifying glass, camera and VAS scale. Results & Conclusions : The AA patches were shown the regrowth of hair. And the pain from lymphadenopathy was disappeared. Oriental medicine treatment including Gagamsunbangpaedok-tang $(Ji\bar{a}ji\check{a}nxi\bar{a}nf\acute{a}ngb\grave{a}id\acute{u}-t\bar{a}ng)$ was effective to regrow hair on AA patches and reduce the symptom of lymphadenopathy as well.

• 한국염색가공학회지
• /
• 제31권1호
• /
• pp.14-24
• /
• 2019

In this study, dyeability of PET fabric was investigated depending on dyeing temperature, pressure, and leveling time using laboratory scale supercritical $CO_2(scCO_2)$ dyeing machine. Dyeing temperature, pressure, leveling time were varied from 100, 120, $130^{\circ}C$, 150, 200, 250bar, 40, 60, 80, 100min, respectively. It is proved that the higher temperature of $scCO_2$ dyeing process, the higher K/S value and the lower $L^*$ value, which in turn means the lower amount of dyeing molecules remained after process done. Compared 200bar with 250bar of dyeing pressure, $scCO_2$ dyeing fabrics under 250bar appeared to have a lower $L^*$ value, a higher K/S value than those from 200bar, meaning that dyeing color turns to darker with higher dyeing pressure. The experiments showed that the most ideal condition for $scCO_2$ dyeing process is $120^{\circ}C$, 250bar for 60 - 100min of leveling time.

• 소음진동
• /
• 제7권1호
• /
• pp.55-60
• /
• 1997

In order to examine the validity of an asymptotic solution obtained from the method of multiple scales, we investigate a third-order subharmonic resonance response of a bar constrained by a nonlinear spring to a harmonic excitation. The motion of the bar is governed by a linear partial differential equation with a nonlinear boundary condition. The nonlinear boundary value problem is solved by using the finite difference method. The numerical solution is compared with the asymptotic solution.