Journal of Welding and Joining

  • 제27권3호
  • /
  • Pages.52-59
  • /
  • 2009
  • /
  • 2466-2232(pISSN)
  • /
  • 2466-2100(eISSN)
대한용접접합학회 (The Korean Welding and Joining Society)
권호 표지
DOI QR코드

DOI QR Code

플래시버트 용접과 연속열간압연법으로 제조된 철근의 기계적 성질과 미세조직에 미치는 합금원소의 영향

Effect of Alloying Elements on Mechanical Properties and Microstructure of Steel Bar Fabricated by Endless Bar Rolling System with Flash Butt Welding

  • 김기원 (동국제강 품질관리팀) ;
  • 조승재 (하이브리드소재솔루션 국가핵심연구센터) ;
  • 강정윤 (부산대학교 재료공학부)
  • Kim, Ki-Won (Quality control team of Dongkuk Steel Co) ;
  • Cho, Seung-Jae (National Core Research Center(NCRC) for hybrid Material Solution) ;
  • Kang, Chung-Yum (Dept. of Material Science and Engeenring, Pusan National University)
  • 발행 : 2009.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Flash butt welding is applied in many industries. New technology was developed recently for joining billets which called "EBROS (Endless Bar Rolling System)". After reheating billets in furnace, two billets were joined using flash butt welding. The objective of this study was to investigate the effect of alloying elements on mechanical properties of flash butt welded zone of hot rolled steel bar. The tensile properties on welded zone of Fe-Mn steel and Fe-Mn-V steel were dropped as compared with non-welded zone. Fe-Mn-Nb steel was opposed to the former. It was found that the white band at the welded zone had high ferrite volume fraction and large ferrite grain size. The vertical white band between flash butt welded billets was transformed into an arrowhead it of steel bar. According to this band, softening has been appeared. There was a interesting phenomenon with HAZ of Fe-Mn-Nb Steel, 40nm scale of particles were observed and hardness of HAZ was higher than non-welded zone.

키워드

참고문헌

  1. K.Ando, S. Nakata and T. Sugimoto : study on the Flash Welding Phenomena of Steel(2ndReport)- Observation by High Speed Motion Pictures-, Journal of JWS, 40-1 (1971), 35-53 (in Japanese)
  2. K.Ando, S. Nakata and T. Sugimoto : study on the Flash Welding Phenomena of Steel($3^{nd}$Report)-On the Upsetting Process-, Journal of JWS, 40-2 (1971), 137-151 (in Japanese)
  3. Boyoung Jeong, In-Su Woo, Jeong-kil Kim and Jong-Bong Lee : Mechanical properties of the Flash Butt Welded joint of 590MPa high Strength Steel, Journal of KWJS, 25-2 (2007), 55-61 (in Korean) https://doi.org/10.5781/KWJS.2007.25.2.055
  4. NKK corporation : Endless Bar Rolling System, 1996, Japan Society of Mechanical Engineers
  5. AUSTEN Terry H : EBROS , Endless bar rolling system, Association of Iron and Steel Engineers, 80 (2003), 41-46
  6. Boyoung Jeong, In-Su Woo and Jong-Bong Lee: Effect of welding parameters on the properties of flash butt welded joints of high strength steel of 590MPa grade, Journal of KWJS, Spring, 2006, 118-120 (in Korean)
  7. H.Dyja, P.Szota, S.Mroz : 3D FEM modelingand its experimental verification of the rolling of reinforcement rod, journal of materials processing thechnology, 153-154 (2004), 115-121
  8. Jai-Hyun Park and In-Bae Kim : A study of Mechanical Properties with Variation of Heattreatments on HLSA Cast Steels Microalloyed With Nb, Ti, and V, Journal of Materials Reserch, 10-11 (2000), 760-769 (in Korean)
  9. Seung Chan Hong, Seong Ryoung Kang nad Kyung Sun Lee : Influnce of finishing Temperature on Microstructure and Mechanical Properties of as-hotrolled Dual phase Steels, J. of the Korean Inst. of Met. & Mater, 39-1 (2001), 17-26
  10. J. Heslop and N. J. Petch : Phill. Magzine, 2 (1957), 649 https://doi.org/10.1080/14786435708242707
  11. Tae Young Kim, Byoung Moon oh and Yeon Chul Yoo : High Temperature Deformation Behavior of Vanadium-Microalloyed Steel, J. of the Korean Inst. of Met. & Mater, 29-9 (1991), 967-975
  12. CBMM Asia Co.,Ltd : Niobium, 2005, 96
  13. W.G. Leslie : The Physical Metallurgy of steels, Mc-Graw-Hill, 1981, 135
  14. J.Rassizadehghani : Ph. D. Theis, University of Kansas, 1990, 46
  15. Inane Park, Namhyun Kang, Suyoung Kim, Young jung Lee, and Kyoung mox Cho : Microstructure and Mechanical properties of Control Rolled Fe-0.1C-(V,Nb) Steels, J. of the Korean Inst. of Met. & Mater, 45-5 (2007), 321-328
  16. G. Krauss : Fine Structure of Austenite produced by the Reverse Martensitic Transformation. Acta Met, 11 (1963), 499-509 https://doi.org/10.1016/0001-6160(63)90085-3
  17. J.Y.Park, J.K.Park, W.Y.Choo and S.W.Lee : Effect of the pricipitation of Manganes Sulfide and Vanadium Carbonitrides on the Intragranular Ferrite, J. of the Korean Inst. of Met. & Mater, 36-11 (1998), 2003-2011
  18. Young Min Kim, Sang Young Shin, Hakcheol Lee, Byoungchul Hwang, Byung Gyu Park, Sunghak Lee and Nack J.Kim : Effect of Mo and V on Tensile and Charpy Impact Properties of API X70 Linepipe Steels, J. of the Korean Inst. of Met. & Mater, 44-4 (2006) 2003-2011, J. Kor. Inst. Met. & Mater, 44-4 (2006)