• Restorative Dentistry and Endodontics
• /
• v.14 no.2
• /
• pp.5-19
• /
• 1989

The purpose of this study was to observe the microleakage of composite resin filling using several glass ionomer cements. The Class V cavities of eighty noncarious human molars were prepared at the cementoenamel juction on the facial and lingual surfaces of each tooth with a No.330 carbide bur in a high speed handpiece. The cavity dimensions were $3.0{\pm}0.5mm$ wide, $2.0{\pm}0.5mm$ high, and $1.5{\pm}0.5mm$ deep and all enamel cavosurface margins were beveled with a No.558 carbide bur in low speed handpiece. The bevel was approximately $45^{\circ}$ and 0.5-1.0mm in width. A total of the 160 cavities was divided into four groups, and then 144 cavities among them were three experimental groups and remaining sixteen cavities were control group. All of the prepared cavities were restored as follows: group 1 : Preparations were restored with there three glass ionomer cements. group 2 : Preparations were restored with a composite resin with three glass ionomer cement bases placed $0.2{\pm}0.1mm$ short of the cavosurface margin. group 3 : Preparations were restored with a composite resin with three glass ionomer cement bases extened to the cavosurface margin. group 4 : As control group, preparations were restored with a composite resin, PALFIQUE. The specimens were then thermocycled in a range of $6^{\circ}C-60^{\circ}C$ and immersed in a bath of 2.0% aqueous basic fuchsin solution for 24 hours. Dye penetration was read on a scale of 0 to 4 by Tani and Buonocore's method. The following conclusions were derived from the results obtained; 1. All groups showed significantly more leakage at the gingival margins than at the occlusal margins(p<0.0005). 2. At the gingival margins, group 1 showed less leakage than group 3(p<0.01) and group 4(p<0.0005), while group 3 exhibited less leakage than group 2(p<0.01) and group 4(p<0.0005). 3. At the occlusal margins, group 4 showed less leakage than group 3(p<0.1) and group 1(p<0.005), while group 3 exhibited less leakage than group 2(p>0.1) and group 1(p<0.025).

• Journal of Microbiology and Biotechnology
• /
• v.30 no.11
• /
• pp.1785-1791
• /
• 2020

In a previous study, the sequential optimization and regulation of environmental parameters using the PhotoBiobox were demonstrated with high-throughput screening tests. In this study, we estimated changes in the biovolume-based composition of a polyculture built in vitro and composed of three algal strains: Chlorella sp., Scenedesmus sp., and Parachlorella sp. We performed this work using the PhotoBiobox under different temperatures (10-36℃) and light intensities (50-700 μmol m^-2 s^-1) in air and in 5% CO₂. In 5% CO₂, Chlorella sp. exhibited better adaptation to high temperatures than in air conditions. Pearson's correlation analysis showed that the composition of Parachlorella sp. was highly related to temperature whereas Chlorella sp. and Scenedesmus sp. showed negative correlations in both air and 5% CO₂. Furthermore, light intensity slightly affected the composition of Scenedesmus sp., whereas no significant effect was observed in other species. Based on these results, it is speculated that temperature is an important factor in influencing changes in algal polyculture community structure (PCS). These results further confirm that the PhotoBiobox is a convenient and available tool for performance of lab-scale experiments on PCS changes. The application of the PhotoBiobox in PCS studies will provide new insight into polyculture-based ecology.

• The Journal of Society for e-Business Studies
• /
• v.22 no.2
• /
• pp.39-60
• /
• 2017

Software product line engineering is widely recognized as an effective way for systematic software reuse, and many studies have been conducted to convert existing software development practices and processes into software product line. In order to convert existing software development into product line, a lot of investments are required such as dedicated development units, appropriate process selection and adaptation, and tool support. In particular, small businesses need business cases and specific practices for applying software product line engineering before its full-scale adoption. In this paper, we present a practical case of applying software product line engineering to the development of web system families and a process of systematically building and reusing software assets. To do this, we analyzed a number of web development projects and presented the experiences and various considerations of small software companies adopting software product line.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.165-170
• /
• 2020

In this study, after applying VR 360-degree video contents for intravenous infusion education, basic data on whether VR 360-degree video can be applied as educational content in the future is prepared by grasping the empathy and flow of nursing students in graduating grades. The VR 360 degree intravenous infusion educational content was developed in four-step process of planning, production, modification and completion. The design of this study was descriptive research, and the study period was from November 9 to November 22, 2019. The subjects of this study were 4th grade nursing students at a university, totaling 64 students. Nursing students watched VR 360 degree intravenous infusion educational content using HMD(head mounted display) under the safety management of the researcher. As a result of the study, the empathy of nursing students was 5.32±0.88 points and the flow was 6.02±0.84 points out of 7-point scale. The VR 360 degree intravenous infusion educational content developed in this study can be used as an educational medium in subjects and comparative departments, and it is necessary to specifically develop and verify teaching and learning methods in future studies.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.285-309
• /
• 1996

Non oxide ceramics such as nitrides of transition metals have shown significant potential for future economic impact, in diverse applications in ceramic, aerospace and electronic industries, as refractory products, abrasives and cutting tools, aircraft components, and semi-conductor substrates amid others. Combustion synthesis has become an attractive alternative to the conventional furnace technology to produce these materials cheaply, faster and at a higher level of purity. However he process os highly exothermic and manifests complex dynamics due to its strongly non-linear nature. In order to develop an understanding of this process and to study the effect of operational parameters on the final outcome, numerical modeling is necessary, which would generated essential knowledge to help scale-up the process. the model is based on a system of parabolic-hyperbolic partial differential equations representing the heat, mass and momentum conservation relations. The model also takes into account structural change due to sintering and volumetric expansion, and their effect on the transport properties of the system. The solutions of these equations exhibit steep moving spatial gradients in the form of reaction fronts, propagating in space with variable velocity, which gives rise to varying time scales. To cope with the possibility of extremely abrupt changes in the values of the solution over very short distances, adaptive mesh techniques can be applied to resolve the high activity regions by ordering grid points in appropriate places. To avoid a control volume formulation of the solution of partial differential equations, a simple orthogonal, adaptive-mesh technique is employed. This involves separate adaptation in the x and y directions. Through simple analysis and numerical examples, the adaptive mesh is shown to give significant increase in accuracy in the computations.

• Journal of Convergence for Information Technology
• /
• v.7 no.4
• /
• pp.121-127
• /
• 2017

In 2013, Baz Luhrmann's movie re-made Fitzgerald's novel, "The Great Gatsby". In Novel, readers keep trace of the plot with their imagination, but in Movie , movie director comes together to create visual and auditory elements of it. Daisy Buchanan is a fashion icon, wearing Prada, Chanel, and Tiffany's jewelry, which reproduce the costume of Jazz Age, and make viewers well understand that of Jazz Age. Symbols like "Ash Valley", "Green light", "East Egg", "West Egg" are presented more directly in movie. Roaring parties held in Gatsby's great mansion was made by computer graphic, and its enormous scale also reflects the mental chaos and the material affluence in those age. Additionally, actors excellent show highlights the theme of the novel. With the adaptation of novel, the film finally achieves more appealing art in front of the public. This thesis investigates these more logistically with the materials of internet.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.169-175
• /
• 2013

According to the increase of the remarried family, education programs are needed to help the adaptation of them. The purpose of this study is to analyze remarriage preparations and to present considerations for the development of remarriage educational program in the future. Through analysis of total nine existing remarriage programs, there are needs to consider the following factors when developing remarriage programs. There is a need to be developed and implemented various programs to adequately support the remarried family. Also need to have a system that help adaption. As a result of research, future remarried program shall be as follows. First, the educational content consists of differency depending on the type of remarriage. Second, we should develop program avoiding the problem-oriented perspective, focus on the enhancements remarried families and address the adaptive factors. Third, psychological support counseling programs should be included. Remarriage Preparation measurement Scale is utilized and children is included in programs.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.154-154
• /
• 2018

To interpret the climate projections for the future as well as present, recognition of the consequences of the climate internal variability and quantification its uncertainty play a vital role. The Korean Peninsula belongs to the Far East Asian Monsoon region and its rainfall characteristics are very complex from time and space perspective. Its internal variability is expected to be large, but this variability has not been completely investigated to date especially using models of high temporal resolutions. Due to coarse spatial and temporal resolutions of General Circulation Models (GCM) projections, several studies adopted dynamic and statistical downscaling approaches to infer meterological forcing from climate change projections at local spatial scales and fine temporal resolutions. In this study, stochastic downscaling methodology was adopted to downscale daily GCM resolutions to hourly time scale using an hourly weather generator, the Advanced WEather GENerator (AWE-GEN). After extracting factors of change from the GCM realizations, these were applied to the climatic statistics inferred from historical observations to re-evaluate parameters of the weather generator. The re-parameterized generator yields hourly time series which can be considered to be representative of future climate conditions. Further, 30 ensemble members of hourly precipitation were generated for each selected station to quantify uncertainty. Spatial map was generated to visualize as separated zones formed through K-means cluster algorithm which region is more inconsistent as compared to the climatological norm or in which region the probability of occurrence of the extremes event is high. The results showed that the stations located near the coastal regions are more uncertain as compared to inland regions. Such information will be ultimately helpful for planning future adaptation and mitigation measures against extreme events.

• Anxiety and mood
• /
• v.15 no.2
• /
• pp.94-100
• /
• 2019

Objective : The purpose of this study was to investigate differences in anxiety and depression symptoms, comorbidity according to the patterns of temperament and character in patients with posttraumatic stress disorder (PTSD). Methods : The temperament and character inventory (TCI), beck depression inventory (BDI) and beck anxiety inventory (BAI) were administered to 151 PTSD patients classified into four groups of adaptation, vulnerable temperament, immature personality and composite vulnerability according to the results of the Temperament and Character Inventory (TCI). MANOVA and Chi-square tests were conducted to analyze differences in BDI, BAI, temperament and character scores and rate of comorbid disorders between the four groups. Results : The immature character and complex vulnerability group showed the higher rate of comorbid depression disorder. Anxiety and depression severity were significantly different among groups, especially depression severity had higher scores in the immature character and complex vulnerability groups and anxiety severity had higher scores in the complex vulnerability group than adaptive group. The immature character and complex vulnerability groups showed significantly lower score on the temperament scale of reward dependence and persistent. Conclusion : The results demonstrate the significance of adaptive characteristics on anxiety and depression symptoms regardless of vulnerable temperaments, and its consequent role in the management of character factors relative to intervention regarding PTSD.