• 제목/요약/키워드: Sawdust

검색결과 915건 처리시간 0.023초

Effect of Fermented Sawdust on Pleurolus Spawn

  • Oh, Se-Jong;Shin, Pyung-Gyun;Weon, Hang-Yeon;Lee, Kang-Hyo;Chon, Gil-Hyong
    • Mycobiology
    • /
    • 제31권1호
    • /
    • pp.46-49
    • /
    • 2003
  • A method of spawn making procedures through the application of fermented sawdust for the purpose of avoiding contamination by undesirable fungi in the course of Pleurotus ostreatus mycelial growth was evaluated. Of three kinds of supplements, rice bran was the most effective to raise temperature up to $70^{\circ}C$. Mycelial activity and density was more considerably improved in the case of using fermented sawdust supplemented with rice bran than the case of non-fermented sawdust. Primordia of Pleurotus ostreatus were formed on fermented sawdust. The substrate of fermented sawdust showed potential to prevent the growth of Trichoderma sp. which caused a symptom on mushroom mycelium, whereas there was nothing to inhibit the growth of Trichoderma sp. during 30 days after inoculation in non-fermented sawdust.

종이와 톱밥을 혼입한 단열 모르타르 재료 개발에 관한 연구 (Making the Insulation Mortar Mixed with Waste Paper and Sawdust)

  • 이승영;손기상
    • 한국안전학회지
    • /
    • 제25권3호
    • /
    • pp.78-82
    • /
    • 2010
  • This study is to test insulation mortar mixed with wastepaper and sawdust to find out its insulation performance. Therefore, wastepaper and sawdust have been added to normal mortar. They are analyzed for the above purpose using compressive strength and insulation performance. It is found that the more wastepaper and sawdust will be mixed, the lower heat conductivity will be taken. Wastepaper and sawdust mixture will be more 2.0% then the insulation mortar quality can be compatible with the 3rd kind of the standard. Optimal mixture for insulation will be wast paper:sawdust=4:6. Cohesive test of materials showed that test material has stronger than stand are $0.10N/mm^2$. It is satisfactory the test result showed a range of $0.12{\sim}0.15N/mm^2$ from the test result. Optimal mixture of wastepaper and sawdust have been found out from the study comprehensively, exclusive of the proportion of wastepaper:sawdust = 8:2. It is thought that standard of length deformation; 0.5% is reasonable. This means that deformation of mortar itself can be considered. But it is also Shown that water mixture has also been sharply changed at first flow test. Therefore, it is thought that absorbed water content in the material gave considerable effect to variation rate.

Reutilization of Enokitake Cultural Waste as Lentinus edodes Cultivation Substrate

  • Chai, Jung-Ki;Lee, Sung-Jin;Kim, Young-Ju;Wi, Kye-Moon
    • Plant Resources
    • /
    • 제3권3호
    • /
    • pp.226-232
    • /
    • 2000
  • The availability of enokitake cultural waste for Lentinus edodes cultivation was investigated, although hardwood sawdust has traditionally been used as a substrate for this fungus. Firstly, physiochemical characteristics of cultural waste were analysed. Secondly, mycelial growth characteristics and fruiting yields of L. edodes on waste treated in some methods were determined. Physiochemical characteristics of enokitake cultural waste showed that the millwaste complex was a little degraded by enokitake fungus and suggested the probability that most component lost by enokitake could be rice bran. Mycelia of L. edodes grew and fruited well on waste supplemented by fresh rice bran and Quercus sawdust although didn't on waste only. Mycelial growths of these fungi on waste were accelerated when supplemented by rice bran to the percent of 40(w/w) but decreased or suppressed at above ratios(30, 40%, w/w). Supplementations of oak sawdust at above 40%(w/w) of the waste and rice bran at 20%(w/w) of the sawdust allowed such a good mycelial growth as to be selected as a pertinent mixing ratio for fruiting medium. A fruiting yield on enokitake cultural waste supplemented by oak sawdust (at 40% of the waste, w/w) and rice bran (at 20% of the sawdust, w/w) was not inferior to that on oak sawdust supplemented by rice bran only (at 20% of the sawdust, w/w). These results indicated strongly the potentiality of enokitake cultural waste as raw materials for shiitake cultivating substrates.

  • PDF

Development and oviposition characteristics of Protaetia brevitarsis (Coleoptera: Cetoniidae) by additional feeding Korean black raspberry marc and blueberry marc

  • Lim, Ju-Rak;Moon, Hyung-Cheol;Park, Na-Young;Lee, Sang-Sik;Kim, Woong;Choi, Chang-Hak;Kim, Hee-Jun
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제44권2호
    • /
    • pp.44-54
    • /
    • 2022
  • The food source of white-spotted flower chafer, Protaetia brevitarsis is important to economical performance. The P. brevitarsis larva were feed by mulberry and oak fermented sawdust. The effect of additional additives, Korean black raspberry (called bokbunja) marc and blueberry marc to fermented sawdust feed on the development and oviposition characteristics were investigated. The development periods of P. brevitarsis was decreased from 165.7 d to 40.0 d (mulberry sawdust) and 169.3 d to 39.0 d (oak sawdust), but the survival rate of larva was not affected by the addition of Korean black raspberry marc to fermented sawdust. However, blueberry marc addition to the fermented sawdust did not significant effect on the development period and survival rate of P. brevitarsis. The percentage of larva weight over 2.5 g was tend to increase by addition of Korean black raspberry marc and/or blueberry marc. The number of oviposition was also tend to increase by adding additional feed to sawdust but there was no significant different.

Characteristics of Sawdust and Cocopeat Beddings, and Their Usefulness According to the Fan and Pen Location for Rearing Hanwoo Cattle

  • Ahn, Gyu Chul;Jang, Sun Sik;Lee, Kang Yeon;Kwak, Wan Sup;Oh, Young Kyun;Park, Keun Kyu
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제29권3호
    • /
    • pp.444-454
    • /
    • 2016
  • This study was designed to examine the characteristics of sawdust and cocopeat bedding materials, including physicochemical properties (Exp. I) and on-farm trial (Exp. II). In Exp. I, the proportion of particle size was in the order of sawdust>cocopeat India>cocopeat Vietnam (p<0.05), and cocopeat contained higher proportion of small particles ($250{\mu}m$+below $250{\mu}m$) than sawdust, causing a dust production problem. Bulk density was cocopeat India>cocopeat Vietnam>sawdust (p<0.05), thus cocopeat treatments showed 4.4 times higher bedding cost than sawdust. The water absorption rates were 702.0% in cocopeat India, 678.3% in cocopeat Vietnam, and 444.0% in sawdust, showing cocopeat had approximately 1.5 times higher water absorption rate than sawdust. Moisture evaporation rates after 12 h of air blowing (2.00 m/s) were higher (p<0.05) in cocopeat Vietnam (80.4%) than sawdust (71.2%) and cocopeat India (72.8%). In vitro ammonia emissions were higher (p<0.05) in sawdust ($2.71mg/m^2/h$) than cocopeat India ($1.59mg/m^2/h$) and Vietnam ($1.22mg/m^2/h$), and total ammonia emissions were higher (p<0.05) in sawdust ($37.02mg/m^2$) than cocopeat India ($22.51mg/m^2$) and Vietnam ($13.60mg/m^2$). In Exp. II, an on-farm trial was conducted with 48 Hanwoo cattle in 16 pens using the same bedding materials as in Exp. I, with fan (blowing 2.00 m/s) and no fan treatments, and feed bunk side (FB) and water supply side (WS) within a pen (4.5 m, $width{\times}9.0m$, length). Beddings were replaced with fresh bedding materials when moisture concentrations were over 65%. No interactions among treatments were detected for moisture concentration and increment rates, and ammonia concentrations, but a significant effect was observed (p<0.01) for each of the treatments. Both concentrations and increment rate of moisture were higher (p<0.01) in the beddings without fan than with fan. Moisture concentrations and increment rate within a pen were also higher (p<0.01) in FB than WS. Thus, the whole no-fan-FB and sawdust-fan-FB were replaced with fresh bedding material between 4 to 5 experimental weeks. The ammonia concentrations and pH of beddings were not significantly different among treatments. Therefore, using cocopeat bedding with a blowing fan can extend twice the bedding utilization period, and WS within a pen showed twice the bedding-life compared to FB. Despite the outstanding characteristics of cocopeat compared with sawdust, using cocopeat as an alternative for sawdust bedding is not recommended for cattle management, considering it has 4.4 times higher bedding cost and a dust production problem.

음식물쓰레기의 호기성 퇴비화에 있어서 왕겨와 톱밥의 영향에 관한 비교 연구 (Comparison of Effects of Chaff and Sawdust on Aerobic Composting of Food Wastes)

  • 박석환
    • 한국환경보건학회지
    • /
    • 제29권3호
    • /
    • pp.28-34
    • /
    • 2003
  • This study was performed to compare the effects of chaff and sawdust as bulking materials on temperature, pH, weight and volume reduction and salinity in aerobic composting of food wastes. Volume ratios of food wastes to chaff in reactor of Control, Ch-l, Ch-2, Ch-3 and Ch-4 were 4:0, 4:1, 4:2, 4:3 and 4:4, respectively. Volume ratios of food wastes to sawdust in reactor of Control, Sd-l, Sd-2, Sd-3 and Sd-4 were 4:0, 4:1, 4:2, 4:3 and 4:4, respectively. Reactors were operated for 24 days with 1 hour stirring by 1 rpm and 2 hours aeration per day. The lowering of the volume ratio of food wastes to chaff and sawdust resulted in the reaction at higher reaction temperature and the elongation of the high temperature reaction period. The lowering of the volume ratio of food wastes to chaff and sawdust resulted in faster pH increase. In the volume ratio of 4:3 and 4:4, pH increased faster in food-chaff mixtures than in food-sawdust mixtures. The lowering of the volume ratio of food wastes to chaff and sawdust resulted in faster steady state in the weight reduction rate and the volume reduction rate. The weight reduction rates of chaff mixtures were higher than those of sawdust mixtures, but the volume reduction rates of sawdust mixtures were more higher than those of chaff mixtures. Salinity increased as composting reaction proceeded, due to reduction in mass weight. The final salinity of Control was 2.79%, and the final range of salinities of chaff and sawdust mixtures were 2.18∼2.37% and 1.86∼2.05%, respectively.

액체종균(液體種菌) 접종(接種)에 의한 표고톱밥재배(栽培) 효과(效果) (Effect of Sawdust Culture on Oak Mushroom, Lentinula edodes (Berk.) Pegler by Inoculation of the Liquid Spawn)

  • 이태수;조남석;민두식
    • Journal of the Korean Wood Science and Technology
    • /
    • 제26권1호
    • /
    • pp.19-28
    • /
    • 1998
  • For cultivation on sawdust-bed of oak-mushroom until present time, inoculation of spawn on sawdust bed has been performed by sawdust spawn. But, liquid spawn may have advantages for rapid mass production of spawn, and now, sawdust-cultivation by liquid spawn inoculation should be applied instead of sawdust spawn. Therefore, investigations were performed to evaluate the effect of sawdust-cultivation by liquid spawn inoculation. The results were as follows: 1. When 11 kinds of liquid media were applied, the oak-mushroom culture medium was the most excellent in growth. Most suitable temperature at PDA was $25^{\circ}C$, and $22.5\sim27.5^{\circ}C$ in range were optimal for liquid culture. In liquid culture, amount of mycelial growth increases rapidly up to 40 days of cultivation. Incubation at fermentor brought yield of 106mg dry mycelia per 40ml media after 17 days. 2. In 1l-spawn bottle, growth of mycelium by inoculation of 20ml-liquid spawns were faster than 6g-sawdust spawn in spread of mycelia. On 2kg-bag culture, inoculations of 10ml-, 20ml- and 30ml-liquid spawns were all slower than 20g-sawdust spawn in mycelial spread. So, amount increasement in ampunt of liquid spawn should be discussed. Yields of mushrooms until third sproutings of 2kg-bag culture were 580g in 30ml-liquid spawn inoculation, but 510g, 486g and 470g from 20g-sawdust spawn, 20ml-liquid spawn and 10ml-liquid spawn, respectively. Thus, 30ml-liquid spawn inoculation was highest in yield.

  • PDF

Removal of Heavy Metals by Sawdust Adsorption: Equilibrium and Kinetic Studies

  • Lim, Ji-Hyun;Kang, Hee-Man;Kim, Lee-Hyung;Ko, Seok-Oh
    • Environmental Engineering Research
    • /
    • 제13권2호
    • /
    • pp.79-84
    • /
    • 2008
  • Adsorption of heavy metals by sawdust was investigated to evaluate the effectiveness of using sawdust to remove heavy metals from aqueous solutions. Kinetic and isotherm studies were carried out by considering the effects of initial concentration and pH. The adsorption isotherms of heavy metals fitted the Langmuir or Freundlich model reasonably well. The adsorption capacity of metal was in the order $Pb^{2+}$ > $Cu^{2+}$ > $Zn^{2+}$. A high concentration of co-existing ions such as $Ca^{2+}$ and $Mg^{2+}$ depressed the adsorption of heavy metal. Adsorption data showed that metal adsorption on sawdust follows a pseudo-second-order reaction. Kinetic studies also indicated that both surface adsorption and intraparticle diffusion were involved in metal adsorption on sawdust. Column studies prove that sawdust could be effective biosorbent for the removal of heavy metals from aqueous phase.

칡넝쿨 및 톱밥을 이용한 C/N비 조절에 따른 음식물찌꺼기의 발효특성에 관한 연구 (A Study on the Fermentation Characteristics of Garbages by the C/N Ratio Control using Kudzu Creeper and Sawdust)

  • 박진식;안철우;문추연
    • 환경위생공학
    • /
    • 제15권3호
    • /
    • pp.24-30
    • /
    • 2000
  • In this study, to determine the optimum fermentation process for the feed production of food wastes and estimate the practical value of fermented feed using kudzu creeper and sawdust as bulking agent. This study considered initial C/N ratio control as the fermentation process variables. The result are summarized as follows. Minimum water contents of byproducts in the fermentation feed production showed 39%(kudzu), 37%(sawdust) at the C/N ratio 25 and 45%(kudzu, sawdust) at the C/N ratio 35. Temperature variations in the fermentation feed production at the C/N ratio 25 indicated $68^{\circ}C$(kudzu), $70^{\circ}C$(sawdust). Optimum condition of fermentation process of water content, C/N ratio and permeability (porous structure of the mixture). For optimum fermentation gravitationally dewatered garbage, the proper mixing ratios of kudzu(moisture contents : 17.3%) and sawdust(moisture contents : 13.2%) were 41% and 39%, respectively. Major biological reaction in the aerobic fermentation feed production occurred during 12~24hrs.

  • PDF

Effect of Supplement nutrition on the Mycelial Growth of Lentinus edodes

  • Yang, Jae-Kyung;Kim, Tae-Hong;Lim, Bu-Kug
    • Journal of the Korean Wood Science and Technology
    • /
    • 제31권6호
    • /
    • pp.60-66
    • /
    • 2003
  • Mycelial growth of L. edodes by supplement nutrition of softwood was studied on a sawdust medium. The sawdust used was from the following softwood species : Larix leptolepis, Pinus densiflora and Pinus koraiensis. The added nutritions consisted of carbon nutritions(sucrose, active carbon, xylose, glucose, paper pellet), nitrogen nutritions(potassium nitrate, ammonium chloride, asparagine, glutamic acid) and vegetable oil(rice bran oil). The sawdust medium was a mixture of 76% sawdust, 20% rice bran, 3% carbon nutrition, 0.4% nitrogen nutrition and 0.6% calcium carbonate. Following addition of carbon and nitrogen nutritions on the sawdust medium proved most suitable : L. leptolepis (glucose, glutamic acid), P. densiflora (active carbon, asparagine) and P. koraiensis (xylose, glutamic acid). The highest mycelial growth was obtained from sawdust medium of optimum condition with 97% of L. leptolepis, 110% of P. densiflora and 98% of P. koraiensis. This study has provided useful preliminary information for the cultivation of L. edodes.