• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.09a
• /
• pp.291-291
• /
• 2010

Emerging global economic growth and increasing demand for energy supply and demand imbalance and the excessive use of fossil fuels existing the rapidly increasing greenhouse gas emissions and resource depletion of global energy crisis is deepening. Accordingly, improvement of living conditions around and through the natural ecological preservation and the need for a comfortable life for the meeting the importance of energy management and consumption are emerging. Many in the field of architecture for energy-saving measures and conducts research and analysis from the early stages to verify the energy performance of BIM (Building Information Model) technology development and commercialization through the building's energy performance to an objective technology forecasts Analysis of the existing building energy performance in waste management also possible that "BIM-based green building process, the possibility of" suggested. In this study, BIM through the analysis of information using the structures for the management of waste, energy and physical data collected by Mapping it can effectively plan resources for recycling were analyzed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.369-374
• /
• 2008

This paper presents the evaluation procedures and the estimation method for the estimation of optimal rebate level for EE(Energy Efficiency) programs. The penetration amount of each appliance is estimated by applying price function to preferred diffusion model resulted from model compatibility test. To estimate the optimal rebate level, two objective functions which express the maximum energy saving and operation benefit are introduced and by multi-objective function which can simultaneously consider two objective functions the optimal rebate level of each appliance is estimated. And then, using the decided rebate level and each penetration amount, the priority order for reasonable investment of each high-efficiency appliance is estimated compared to the results of conventional method. Finally, using a benefit/cost analysis based on California standard practice manual, the economic analysis is implemented for the four perspectives such as participant, ratepayer impact measure, program administrator cost and total resource cost.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.936-941
• /
• 2005

To achieve rapid developments and ensure competitiveness, cost saving, digital manufacturing is essential in die shops. Digital Manufacturing is a technology to facilitate effective product developments and agile productions by digital environments representing the physical and logical schema and the behavior of real manufacturing system including manufacturing resources, processes and products. For applying digital manufacturing to die shop, engineering information managements of products, manufacturing process and resources are needed. In this paper proposes and implements, PLM approach for achieving engineering collaborations in engineering activities. We suggest detail procedures, some examples and considerations of PPR managements in die shop.

• Journal of Navigation and Port Research
• /
• v.35 no.7
• /
• pp.589-596
• /
• 2011

Terminal market has rapidly crashed and market rates have taken a sharp plunge. The substantial throughput decrease resulted from the world economic downturn has been a finishing blow to the terminal operators in Busan. Every terminal operator is taking cost saving as its first priority and accelerating structural reform and downsizing. Under the desperate situation, the need of effective cost analysis would be highly required to effectively control operation cost and to develop new services to satisfy the different needs of the customers. Furthermore, terminal operators could reduce unnecessary activities and concentrate their resource on the more cost-effective process through the operation cost analysis. In order to suggest a new framework of the cost control of container terminals, this paper seeks to analyze terminal costs based on ABC approach by processing actual data.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1103-1111
• /
• 2011

This paper is developed to Energy Balance Flow show the flow of total energy resource be used nationally. The Energy Balance Flow is applicable of demand management factor through the analysis of foreign energy model of supply and demand and energy statistic data in the country. This study is based on and developed to Energy system management model is able to appraisal efficient of energy cost cutting, CO2 emission reduction and Energy saving at the national level calculated effect reached amount of primary energy to change of energy flow followed application of demand side management factor is able to appraisal quantitatively at the total energy to model of demand and supply.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.679-680
• /
• 2011

This paper is developed to Energy Balance Flow show the flow of total energy resource be used nationally. The Energy Balance Flow is applicable of demand management factor through the analysis of foreign energy model of supply and demand and energy statistic data in the country. This study is based on and developed to Energy system management model is able to appraisal efficient of energy cost cutting, CO2 emission reduction and Energy saving at the national level calculated effect reached amount of primary energy to change of energy flow followed application of demand side management factor is able to appraisal quantitatively at the total energy to model of demand and supply.

• Journal of Technology Innovation
• /
• v.12 no.1
• /
• pp.287-304
• /
• 2004

Since there are various types of technologies in the steel manufacturing industry, steel manufacturers need to adopt the most suitable technology Pricing method contingent on the technology type. Steel manufacturing technologies could be categorized as three groups. First, product and process technologies can enhance sales and contribute revenue increase, DCF method could be recommended. Second, maintenance and quality management technologies are mainly embodied in people, human resource profitability method is more suitable. Third, break-through technologies have great uncertainty in terms of commercialization and commercial success, therefore cost saving method is more reasonable. Finally, a sample case is suggested applying above technology pricing model to a steel manufacturer.

• Journal of Korea Technology Innovation Society
• /
• v.4 no.2
• /
• pp.143-156
• /
• 2001

Technology evaluation is one of the key issues in discussions on the development of evaluation methods. This paper deals with some methods for the evaluation of new energy technologies, which were appraised by MAUT from various outlooks: economics, environment, and resource saving. MAUT is considered to be the proper method for evaluating the next generation energy technology, since it can evaluate alternatives that comprise basic criteria. This paper analyzes a priority order of 13 new energy technologies selected by groups of energy technology experts through two steps. Converted utility technology shows the highest value in economics.

• Journal of Communications and Networks
• /
• v.10 no.3
• /
• pp.331-337
• /
• 2008

In this paper, we investigate survivability in wavelength division multiplexing (WDM) mesh networks and propose a new algorithm called improved shared-path protection (ISPP) to completely tolerate the double-link failures. Compared with previous algorithms for protecting double-link failures, i.e., shared-path protection (SPP) and shared-link protection (SLP), the advantage of ISPP is to allow primary paths and backup paths to share the mixed wavelength-links based on the proposed new rules in which some primary wavelength-links can be changed to mixed wavelength-links, which can be shared by primary paths and backup paths. In addition, some mixed wavelength-links also can be shared by different backup paths for saving resources. Simulation results show that ISPP algorithm performs better in resource utilization ratio and blocking probability than conventional SPP and SLP algorithms.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.407-412
• /
• 2007

본 논문에서는 IEEE 802.16 OFDMA 시스템에서 단말들의 에너지 절약을 위한 효율적인 상향 링크 자원 할당 알고리즘을 제시한다. 기지국은 각각의 단말들이 상향링크로 데이터를 전송할 수 있도록 상향링크 부프레임에 연속적인 형태의 자원을 할당해 줘야 한다. 이렇게 각 단말들의 에너지 소비를 고려하여 효율적으로 자원을 할당하는 방식은 최적화 문제의 형태로 접근할 수 있다. 본 논문에서는 전체 에너지소비가 최소가 되는 자원 할당 문제를 Multiple Choice Knapsack 문제로 정의하고, 이를 효율적으로 풀 수 있는 준최적화 알고리즘을 제시한다. 준최적화 알고리즘은 전체 에너지 소비가 최소가 되는 각 단말들의 최적의 변조로 부호화 기법을 찾는다. 그리고 성능평가를 통해 준최적화 알고리즘이 채널 상태만을 고려하여 변조로 부호화 레벨을 결정하는 기법에 비해 최대 53%의 성능 이득을 보이는 것을 제시한다.