• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.443-446
• /
• 2001

MI(Magneto-Impedance) sensor which is made by thin films has significantly high detecting sensitivity in weak magnetic field. It also has a merit to be able to build in low power system. Its structure is simple, which makes it easier to prepare a miniature. In this study, its magnetic permeability and anisotropy field(H$\sub$k/) as a function of a thickness of sputtered amorphous CoZrNb thin film with high saturation magnetostriction and excellent soft magnetic property are investigated. In order to make a uniaxial anisotropy, thin film was subjected to post annealing with a static magnetic field with 1KOe intensity at 250, 300, and 320$^{\circ}C$ for 2 hour. Anisotropy field(H$\sub$k/)of thin film is measured by using MH loop tracer. Its magnetic permeability of thin film is measured over the frequency range from 1 MHz to 750MHz. It has shown that the magnetic permeability of amorphous CoZrNb thin film is decreased due to the skin effect with increasing a thickness of CoZrNb thin film, and hence its driving frequency is lowered.

• 대한수의학회지
• /
• 제48권3호
• /
• pp.243-250
• /
• 2008

A calmodulin-dihydrofolate reductase (DHFR) sandwich fusion protein was generated by insertion of calmodulin into the $\beta$-bulge region of DHFR to observe the effects of structurally constraining the calmodulin structure. The calcium binding properties of the sandwich protein were almost identical to calmodulin. Similar to calmodulin ($10.7 {\mu}M$), the sandwich protein bound four equivalents of calcium, with half saturation ($K_{0.5}$) observed at a [$Ca^{2+}$] of $8{\mu}M$. However, nicotinamide adenine dinucleotide (NAD) kinase activation property of the sandwich protein was lower than that of calmodulin. The sandwich protein activated NAD kinase, but to only half of the level obtained with calmodulin. The K 0.5 for both calmodulin and the sandwich protein were approximately the same (1-2 nM). Methylation analyses of the sandwich protein show that insertion of calmodulin into DHFR results in a large decrease in methylation. The $V_{max}$ observed with the sandwich protein (95 nmole/min/ml) was only 22% of the value observed with calmodulin (436 nmol/min/ml) in the presence of calcium. Addition of trimethoprim to the reaction significantly inhibited the observed methylation rate. Overall, the data suggest that the insertion of calmodulin into the DHFR structure has little effect on calcium binding by the individual lobes of calmodulin, but may constrain the lobes in a manner that results in altered interaction with the calmodulin-dependent proteins, and severely perturbed the methyltransferase recognition site.

• Journal of Magnetics
• /
• 제15권3호
• /
• pp.108-111
• /
• 2010

Fe50Cr50 metastable alloys were prepared by the mechanical alloying method with milling periods of 1, 2, 4, 6, 12 and 24 hours, respectively. The structural evolution was analyzed by the extended x-ray absorption fine structure (EXAFS). In this work, the EXAFS analysis provided the local structural information around Fe central atom. The saturation magnetization was also measured by VSM. The magnetization decreased as the process mechanical alloying progressed. The magnetic property was related to the local structural variation as a function of processing time. The analysis showed that the diffusion Cr atoms into Fe clusters caused the reduction of magnetization. EXAFS analysis exhibited that the local ordering of magnetic atoms caused the magnetic ordering. Also, EXAFS analysis showed that the long range order of Fe atoms was destroyed completely in 24 hour milling.

• The Korean Journal of Ecology
• /
• 제20권3호
• /
• pp.157-162
• /
• 1997

Changes on soil physical and chemical properties following the forest fire in Kosung area in Kangwon province were examined. Twenty seven sampling plots[16 burned (8 low intensity fire, 8 high intensity fire) and 11 unburned plots] from Pinus densiflora community were chosen and soil samples from three depths(0-5, 5-15, 15-25 cm) under the forest floor were collected. Forest fire in the area affected soil chemical properties. Soil pH, available phosphorus, base saturation, K, Ca, and Mg on the surface soil(0-5cm) in the burned areas compared with the unburned areas were increased, while soil properties on the subsurface soil(5-25 cm) were not changed. Organic matter, total nitrogen, available phosphorus, and exchangeable cations following the high in tensity fire on the surface soil were generally lower than those in the low intensity fire areas. This indicates that these nutrients on high intensity fire areas may be volatilized. The results suggest that the fire effects on soil chemical properties were confined mainly to the surface soil and were different between the high and the low intensity fire types.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1564-1567
• /
• 2005

Zinc oxide thin films were grown at the t emperature of $100^{\circ}C$ and $150^{\circ}C$ by means of plasma enhanced atomic layer deposition (PEALD) and conventional atomic layer deposition for applying to the transparent thin film transistor (TTFT). The growth rate of $1.9{\AA}/cycle$ with oxygen plasma is similar to that of film grown with water. While the sheet resistivity of ZnO grown with water is 1233 ohm/sq, that of film grown with oxygen plasma was too high to measure with 4 point probe and hall measurement system. The resistivity of the films grown with oxygen plasma estimated to be $10^6$ times larger than that of the films grown with water. The difference of electrical property between two films was caused by the O/Zn atomic ratio. We fabricated ZnO-TFT by means of ALD for the first time and the ZnO channel fabricated with water showed saturation mobility of $0.398cm^2/V{\cdot}s$ with bottom gate configuration.

• Journal of Mechanical Science and Technology
• /
• 제14권4호
• /
• pp.369-379
• /
• 2000

In industrial production-distribution systems, production and purchasing rates, associated inventories, and sales are very critical for the profits of each component in the system. The objective of this study is to investigate an effective information control scheme for a production -distribution system by automatic feedback control techniques. In this work, a dynamic control scheme that has an integrated -error with state-feedback and filtering (ISFF) is proposed as a new algorithm for a dynamic controller. Generalized formulations of the dynamic control are proposed in the continuous-time and discrete-time cases. A methodology for an evaluation of ISFF controller gains using the eigen structure property is presented. When an upper-limit is imposed on the production capability by available factory space and capital equipment, supervisory control is provided to avoid integrator-windup and deterioration of system performance.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.592-601
• /
• 2016

This paper presents the modeling of insulated-gate bipolar transistor (IGBT) in electromagnetic transients program (EMTP) simulation for the reliable calculation of switching and conduction losses. The conventional approach considering the physical property of switching devices requires many attribute parameters and large computation efforts. In contrast, the proposed method uses the curve fitting and interpolation techniques based on typical switching waveforms and a user-defined component with variable resistances to capture the dynamic characteristics of IGBTs. Therefore, the simulation time can be efficiently reduced without losing the accuracy while avoiding the extremely small time step, which is required in simulation by the conventional method. The EMTP based simulation includes turn-on and turn-off transients of IGBT, saturation state, forward voltage of free-wheeling diode, and reverse recovery characteristics, etc. The effectiveness of proposed modeling for the EMTP simulation is verified by the comparison with experimental results obtained from practical implementation in hardware.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1661-1667
• /
• 2013

This paper studies the dynamic irreversible demagnetization characteristics of an interior permanent magnet (PM) brushless DC motor with a stator turn fault. A new algorithm, which is a finite element method (FEM) combined with a line voltage equation of the motor, is developed to analyze irreversible demagnetization under dynamic and transient states and considers a stator turn fault. The input current, circulating current, magnetic distribution characteristics, and operating property of the PM, including the irreversible demagnetization in the fault state, are analyzed using this algorithm by considering the magnetic saturation effect. The feasibility of the proposed method confirmed from the analysis results is verified via an experiment. Through this fault analysis, we can accurately check the fault phenomena of a PM motor against the demagnetization fault for fault prevention.

• 통상정보연구
• /
• 제9권2호
• /
• pp.41-64
• /
• 2007

A life insurance industry's market is reaching a state of saturation recently, and the competition is as time goes by intense among the non-life insurance industry. Consequently, the insurance companies must grope a new source of revenue and develop a new business model for a stability growth. At the forked road, the insurance companies must group the existing and new customers in order to find the royal customers, and develop a new service with them. Accordingly, it is the time to study the advance of PB field and the royal customer management that will maintain and expand the new relations with them. Besides, the PB was the service to begin in needs of the specific group, but now it is regarded as a new source of high profit in the age of universal financial service among the financial circles. As a consequence, the PB marketing is introduced in haste, and such trend seems to be continued. Therefore, the plans that help the domestic insurance company reflect the characteristic of the insurance and expand the scope of business into the scope of property management according to the needs of customers under a universal financial service trend will be studied.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.155-159
• /
• 2003

Polycrystalline $Ti_{1-x}Co_xO_2$ thin films on $SiO_2$ (200 nm)/Si (100) substrates were prepared using liquid-delivery metalorganic chemical vapor deposition. Microstructures and ferromagnetic properties were investigated as a function of doped Co concentration. Ferromagnetic behaviors of polycrystalline films were observed at room temperature, and the magnetic and structural properties strongly depended on the Co distribution, which varied widely with doped Co concentration. The annealed $Ti_{1-x}Co_xO_2$ thin films with $x{\leq}0.05$ showed a homogeneous structure without any clusters, and pure ferromagnetic properties of thin films are only attributed to the $Ti_{1-x}Co_xO_2$ (TCO) phases. On the other hand, in case of thin films above x=0.05, Co clusters formed in a homogeneous $Ti_{1-x}Co_xO_2$ Phase, and the overall ferromagnetic (FM) properties depended on both $FM_{TCO}$ and $FM_{Co}$. Co clusters with about 10nm-150nm size decreased the value of Mr (the remanent magnetization) and increased the saturation magnetic field.