• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.846-847
• /
• 2011

This paper presents the study on analysis of single phase induction motor characteristics by equivalent circuit. For high efficiency of single phase induction motor, the motor parameters used for equivalent circuit analysis is important. The accuracy of equivalent circuit analysis of motor depends on the circuit parameters like saturation factor. Therefore this paper proposed the analysis method considering saturation factor. The saturation factor was calculated by iteration routine and numerical method. this proposed method was verified by FEM analysis results and dynamo test results of the prototype model.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.178-183
• /
• 2014

This paper presents a motor characteristics analysis method using an equivalent circuit. Motor characteristics analysis via equivalent circuit is very important for designing a high efficiency single phase induction motor. The accuracy of the motor characteristics depends on the accuracy of the parameters, especially saturation factor, which determines the cyclical relationship in the analysis process. Therefore, using the proposed method, the saturation factor was calculated using the iteration routine and numerical technique. The proposed method was verified by comparing the finite element method results and the dynamo test results of manufactured prototype model.

• 대한전자공학회논문지
• /
• 제15권5호
• /
• pp.34-38
• /
• 1978

rate equation을 사용하여 DH Laser Diode에서 나타나는 전기적 포화현상이 이론적으로 설명되었다. Carrier density는 threshold 이후에 서서히 ns에 접근해가며 이론적으로 계산된 곡선과 예측된 ΔVj는 전에 보고된 실험결과를 정확히 설명한 수 있음이 입증되었다. carrier saturation factor kβ를 제안하였으며 kβ는 L.D의 이상성을 결정하는 중요한 factor 임이 설명되었다. kβ와 β와의 관계를 통해 β가 작으면 작을수록 diode의 특성은 이상적 diode에 가까와짐이 밟혀졌다.

• 한국멀티미디어학회논문지
• /
• 제16권2호
• /
• pp.119-130
• /
• 2013

본 논문에서는 디지털 영상의 색상을 유지하면서 영상의 명암대비 향상과 함께 채도를 향상시키는 방법을 제시한다. 제안방법은 명암대비 향상 후 밝기 변화에 따른 시각적인 채도 변화를 보정하기 위해 최대색차신호 테이블을 이용한다. 최대색차신호 테이블로부터 휘도변화에 따른 가중치를 구하고, 입력 색차신호에 가중치를 곱하여 채도를 밝기에 적응적으로 보정한다. 또한 사용자가 입력한 만큼의 채도를 향상시키는 과정에서 과도한 채도 향상으로 인한 왜곡을 막기 위해 휘도와 색상에 따른 채도의 상관관계를 고려하여 색차신호가 올바른 색역에 사상될 수 있도록 한다. 다양한 특성을 갖는 영상에 대한 실험을 통해 제안방법은 기존방식과 비교하여 효과적으로 컬러 영상의 선명도를 향상시킴을 확인하였다.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1099-1110
• /
• 2018

In this paper, a loss minimization control method for interior permanent magnet synchronous motors is presented with considering self-saturation and cross saturation. According to variation of the d-axis and q-axis inductances by different values of the d-axis and q-axis components of currents, it is necessary to consider self-saturation and cross saturation in the loss minimization control method. In addition, the iron loss resistance variation due to frequency variation is considered in the condition of loss minimization. Furthermore, the loss minimization control method is compared with maximum torque per ampere (MTPA), unity power factor (UPF) and $i_d=0$ control methods. Experimental results verify the performance and proper dynamic response of the loss minimization control method with considering self-saturation and cross saturation.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1264-1273
• /
• 2015

An inverter output power control based power factor correction (PFC) strategy is being extensively used for permanent magnet synchronous motor (PMSM) drives in appliances because such a strategy can considerably reduce the cost and size of the inverter. In this strategy, PFC circuits are removed and large electrolytic DC-link capacitors are replaced with small film capacitors. In this application, the PMSM d-q axes currents are controlled to produce ripples, the frequency of which is twice that of the AC main voltage, to obtain a high power factor at the AC mains. This process indicates that the PMSM operates under periodic magnetic saturation conditions. This paper proposes a back electromotive-force (back-EMF) estimator for the high-speed sensorless control of PMSM operating under periodic magnetic saturation conditions. The transfer function of the back-EMF estimator is analyzed to examine the effect of the periodic magnetic saturation on the accuracy of the estimated rotor position. A simple compensation method for the estimated position errors caused by the periodic magnetic saturation is also proposed in this paper. The effectiveness of the proposed method is experimentally verified with the use of a PMSM drive for a vacuum cleaner centrifugal fan, wherein the maximum operating speed reaches 30,000 rpm.

• 한국토양비료학회지
• /
• 제34권1호
• /
• pp.71-75
• /
• 2001

포화침출액의 전기전도도, ECe와 토양과 증류수를 1:5로 하여 측정된 EC1:5간의 직선 관계식의 경사 또는 희석 배수 (DF)에 대해 서로 독립적으로 발표된 연구 결과를 분석한 결과, DF는 CEC와 고도의 유의성을 보이는 부상관 관계에 있었다. 이 관계로부터 한국 대표 토양에 대한표토의 CEC로부터 산출한 DF는 사토에서 12.29, 식토에서 6.44이었다. 이 연구에서 포화수분점에 대한 조사가 이루어지지 않았으나, 측정된 EC1:5로부터 ECe를 추정할 때 토양의 CEC를 고려해야 하며, 제시된 토성에 따른 DF값의 적용이 바람직할 것으로 판단되었다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.212-212
• /
• 2015

So far, geomorphologic dispersion due to the heterogeneity characteristics of flow paths in a basin has been demonstrated as a major factor affecting to the hydrologic response function of a catchment. This effect has considered by many previous studies taking into account flow path length factors, especially in the application of width function. Based upon the analysis of topographic index, another important geomorphologic factor extracted from DEM data, this work presents a new factor named saturation to evaluate its effects to the formation of the well-known instantaneous unit hydrograph (IUH) in Nash model and drainage structure in a river basin. First, the geomorphologic parameters corresponding to different saturation conditions are computed from DEM data with the support of GIS software. Then, in the combination of hydrologic and geomorphologic data, effective rainfall in each saturation degree and the Nash parameters are calculated using excel. Finally, the verification process with direct runoff data is conducted using Fortran programming. This process is applied to five sub-watersheds in Bocheong catchment ($485.21km^2$) in Korea where the necessary data are available and believable. The results from this approach will improve researchers and students'understandings about the relationship between rainfall and runoff and its relation with drainage structure within a catchment.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권2호
• /
• pp.119-126
• /
• 1999

Current transformer (CT) saturation may cause a variety of protective relays to malfunction. The conventional CT is designed that it can carry up to 20 times the rated current without exceeding 10% ratio error. However, the possibility of CT saturation still remains if the fault current contains substantial amounts of ac and/or dc components. This paper presents a design method of iron-cored CTs for use with protective relays to prevent CT saturation. The proposed design method determines the core cross section of the CT; it employs the transient dimensioning factor to consider relay's operating time (duty cycle) and dc component as well as ac components contained in the fault current, and symmetrical short-circuit current factor to consider as well as ac components contained in the fault current, and symmetrical short-circuit current factor to consider the biggest fault current. The method designs the cross section of CTs in cases of reclosure and no reclosure.

• 대한전기학회논문지
• /
• 제40권5호
• /
• pp.531-539
• /
• 1991

We develop an analytical model of the static and the dynamic characteristics of amorphous silicon thin film transistors (a-Si TFTs) in order to incorporate into a widely used circuit simulator such as SPICE. The critical parameters considered in our analytical model of a-Si TFT are the power factor (XN) of saturation source-drain current and the effective channel length (L') at saturation region. The power factor, XN must not always obey so-called