• 제목/요약/키워드: Saturated sand

검색결과 185건 처리시간 0.021초

요소분해효소에 의한 탄산칼슘 침전을 통한 지반 개량 평가 (Evaluation of Soil Improvement by Carbonate Precipitation with Urease)

  • 송준영;심영종;진규남;윤태섭
    • 한국지반공학회논문집
    • /
    • 제33권9호
    • /
    • pp.61-69
    • /
    • 2017
  • 본 연구에서는 사질토에서의 EICP에 의한 탄산칼슘 침전량을 정량적으로 평가하였다. 생성된 탄산칼슘은 염산과의 반응에 수반되는 이산화탄소 기체 압력 증분을 통해 간접적으로 측정하였으며, 이는 반응이 진행됨에 따라 특정 값으로 수렴하는 경향을 보였다. EICP 용액으로 포화된 주문진표준사의 전단파 속도 및 전기전도도값은 측정된 탄산칼슘량의 수렴시간보다 선행하여 일정한 값에 도달함을 확인하였다. 결정화 모델은 탄산칼슘이 흙 입자간 접촉점과 입자표면에서 생성됨을 나타내며, 이를 통해 최종 전단파 속도 및 최종 전기전도도에 도달하는 시간과 탄산칼슘 생성량의 수렴시간 간의 불일치가 설명 가능함을 보였다. 또한, 용액 농도 0.5g/L를 이용한 최종 전단파 속도는 0.1g/L의 것보다 224% 높은 효율을 나타내었다. 더불어 효소의 농도와 무관하게 전기전도도와 전단파 속도의 상관관계가 있음을 확인하였으며 주사전자현미경과 X-ray CT 이미지 분석을 통해 생성된 탄산칼슘의 공간적 분포를 확인하였다.

포화된 사질토의 전기전도도에 중금속과 염분 농도가 미치는 영향 (Effects of Heavy Metal and Salinity on Electrical Conductivity in Fully Saturated Sand)

  • 이동수;홍영호;홍원택;채광석;이종섭
    • 한국지반환경공학회 논문집
    • /
    • 제18권10호
    • /
    • pp.23-34
    • /
    • 2017
  • 포화된 흙의 전기적인 특성은 흙 주위에 있는 간극수의 전기전도도에 크게 의존하므로, 흙의 전기전도도 변화를 이용하여 지반속으로의 오염물 침투를 감지하는데 널리 활용되고 있다. 본 연구의 목적은 포화시료에 대해 염분비와 납의 농도 변화에 따른 흙의 전기적 특성 변화를 조사하는 것이다. 전기저항과 시간영역반사법 신호측정을 위한 센서를 매설한 원통형 셀 내부에 담수 및 염분 농도 1%, 2% 그리고 3%의 염수용액을 0~10mg/L 사이의 6가지 납 표준용액과 혼합하여 수용액을 준비하였다. 이후 수용액 속에 건조시킨 모래시료를 수중강사법을 이용하여 조성하였다. 조성된 포화시료에 대해 셀 내부에 설치된 센서들로부터 전기저항과 시간영역반사법 신호를 측정하고 이 결과로부터 전기전도도를 산정하였다. 실험 결과, 주파수 1kHz에서 측정된 전기저항으로 부터 산정한 전기전도도는 납의 농도가 증가함에 따라 연속적으로 증가하는 것으로 나타났으므로 전기저항으로부터 산정한 전기전도도가 오염정도를 파악하기 위해 사용될 수 있는 것으로 나타났다. 또한 시간영역반사법으로부터 산정한 전기전도도의 경우 저농도에서의 납의 농도 변화에도 전기전도도가 변화하지만, 납의 농도가 증가함에 따라 변화 정도는 점차 감소하는 것으로 나타났다. 즉, 시간영역반사법은 중금속 누출여부를 조사하는데 적합한 것으로 평가되었다. 본 연구는 전기저항과 시간영역반사법의 상호보완적인 특성을 활용한다면 해안 및 해양환경에서도 중금속의 누출 및 오염을 감지할 수 있음을 보여준다.

Gas Chromatography에 의(依)한 미강유(米糠油)의 지방산분석(脂肪酸分析) (Analysis of Fatty Acid in Rice Bran Oil by Gas Chromatography)

  • 정태명;신종수
    • Applied Biological Chemistry
    • /
    • 제9권
    • /
    • pp.29-33
    • /
    • 1968
  • 1. 미강유중(米糠油中)의 함존지방산(含存脂肪酸)은 Oleic acid, Linoleic acid, Palmitic acid의 순(順)으로 함량(含量)이 많으며 이상(以上) 3종(種) 지방산(脂肪酸)이 주성분(主成分)을 이루고 있다. Stearic acid, myristic acid와 Linolenic acid는 극소량(極少量) 함유(含有)되어 있을 뿐이며 $C_{12}$ 이상(以上)의 산(酸)은 그 흔적(痕迹)이 보이지 않았다. 2. 표준(標準) 지방산(脂肪酸) Methyl로서 구(求)한 보정계수(補正係數)는 포화지방산(飽和脂肪酸)에 있어서 $C_{18}$까지는 탄소수(炭素數)가 증가(增加)함에 따라 커지고 또 동일탄소수(同一炭素數)의 지방산(脂肪酸)에 있어서는 이중결합(二重結合)의 수(數)에 따라 커지고 있다. 3. 지방산(脂肪酸) Methyl Ester의 Retention time의 대수치(對數値)는 포화산(飽和酸)의 탄소수(炭素數), 또는 같은 탄소수(炭素數)의 지방산(脂肪酸)에 있어서 그 이중결합(二重結合)의 수(數)와의 사이에 직선관계(直線關係)가 있다는 것을 확인(確認)했다.

  • PDF

유류오염물질의 GPR 반응에 대한 모델 실험 연구 (Experiments on the GPR Reposnse of the Organic Hydrocarbons)

  • 김창렬
    • 자원환경지질
    • /
    • 제37권2호
    • /
    • pp.185-193
    • /
    • 2004
  • 휘발유와 같은 유기탄화수소계 오염 물질인 유류가 지하 분포 시, 불포화대에 분포하는 가스상(또는 증기상)유류와 지하수 포화대에 포획되어있는 잔류상 유류 오염 물질이 GPR(Ground Penetrating Radar)에 미치는 반응을 조사하기 위하여 모델 실험을 수행하였다. 모델 실험에는 모래와 자갈을 토양 매질로서 채운 탱크를 이용하였고, 유류 수송을 위한 매설 파이프 또는 지하 유류저장탱크로부터 유류의 누출을 모사하기 위하여 모델 탱크 바닥으로부터 물과 휘발유를 주입 또는 배출하여 지하수면의 상승과 하강을 유도하면서 다양한 상의 LNAPL지하분포를 모사하여 GPR 측정을 실시하였다. 본 연구 결과, 불포화대에서 매질의 수분함량 증가에 따른 레이다 파의 속도 감소를 보이는 민감한 GPR 반응이 관측되었으며, 지하수면의 상승과 하강에 따른 지하수면 위치 변화 관측에 있어서 GPR의 유용성이 입증되었다. 본 연구에서 모관대를 형성하고 있는 매질의 대수층에서는 실제 지하수면 대신 모관대의 상부가 지구물리학적 지하수면으로 탐지되었다. 또한 휘발유 주입 이후 형성된 불포화대내 가스상 LNAPL은 매질의 전기적 성질의 변화를 유도하여 레이다 파의 감쇠를 야기하는 GPR 반응을 나타내었다. 포화대 내의 잔류상 LNAPL에 대한 GPR 반응은 레이다 파의 매질내 속도 및 에너지 투과성을 향상시킴으로써 지하수면 상승으로 포화대에 포획된 잔류상 유류오염물질를 포함하는 대수층 지역의 탐지 가능성을 보여 주었다. 이는 유류오염물질이 지하수면 아래의 포화대에 잔류상의 형태로 분포하는 오염지역에서 GPR를 이용하여 유류오염지역을 탐지할 수 있는 새로운 탐사전략의 근거를 제공한다.

Seismic performance assessment of single pipe piles using three-dimensional finite element modeling considering different parameters

  • Duaa Al-Jeznawi;Jitendra Khatti;Musab Aied Qissab Al-Janabi;Kamaldeep Singh Grover;Ismacahyadi Bagus Mohamed Jais;Bushra S Albusoda;Norazlan Khalid
    • Earthquakes and Structures
    • /
    • 제24권6호
    • /
    • pp.455-475
    • /
    • 2023
  • The present study investigates the non-linear soil-pile interaction using three-dimensional (3D) non-linear finite element models. The numerical models were validated by using the results of extensive pile load and shaking table tests. The pile performance in liquefiable and non-liquefiable soil has been studied by analyzing the liquefaction ratio, pile lateral displacement (LD), pile bending moment (BM), and frictional resistance (FR) results. The pile models have been developed for the different ground conditions. The study reveals that the results obtained during the pile load test and shaking cycles have good agreement with the predicted pile and soil response. The soil density, peak ground acceleration (PGA), slenderness ratio (L/D), and soil condition (i.e., dry and saturated) are considered during modeling. Four ground motions are used for the non-linear time history analyses. Consequently, design charts are proposed depended on the analysis results to be used for design practice. Eleven models have been used to validate the capability of these charts to capture the soil-pile response under different seismic intensities. The results of the present study demonstrate that L/D ratio slightly affects the lateral displacement when compared with other parameters. Also, it has been observed that the increasing in PGA and decreasing L/D decreases the excess pore water pressure ratio; i.e., increasing PGA from 0.1 g to 0.82 g of loose sand model, decrease the liquefaction ratio by about 50%, and increasing L/D from 15 to 75 of the similar models (under Kobe earthquake), increase this ratio by about 30%. This study reveals that the lateral displacement increases nonlinearly under both dry and saturated conditions as the PGA increases. Similarly, it is observed that the BM increases under both dry and saturated states as the L/D ratio increases. Regarding the acceleration histories, the pile BM was reduced by reducing the acceleration intensity. Hence, the pile BM decreased to about 31% when the applied ground motion switched from Kobe (PGA=0.82 g) to Ali Algharbi (PGA=0.10 g). This study reveals that the soil conditions affect the relationship pattern between the FR and the PGA. Also, this research could be helpful in understanding the threat of earthquakes in different ground characteristics.

해진시 개단무리말뚝의 거동에 관한 모형실험 연구 (An Experimental Study on the Behavior of Open-ended Pipe Piles Ggroup to the Simulated Seaquake)

  • 남문석;최용규;김재현
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1999년도 봄 학술발표회 논문집
    • /
    • pp.447-454
    • /
    • 1999
  • The compressive capacity and the soil plugging resistance of single open-ended pipe pile were completely decreased in the previous study on the behavior of shorter single pile during simulated seaquake induced by the vertical component of earthquake. But the capacity of single open-ended pipe pile with greater penetration and the capacity of piles group with shorter penetration were expected to be stable after seaquake motion. In this study, first, 2-piles or 4-piles are driven into the calibration chamber included in saturated fine medium sand with several simulated penetrations, and the compressive load test for each piles group was performed. Then, about 95 % compressive load of the ultimate capacity was applied on the pile head during the simulated seaquake motion. Finally, In confirm the reduction of pile capacity during the simulated seaquake motion, the compressive load test for each single pile or piles group after seaquake motion was performed. During the simulated seaquake, the compressive capacity of open-ended pipe piles with greater penetration ( 〉about 27 m) was not degraded even in deep sea deeper than 220 m and soil plug within open-ended pipe pile installed in deep sea was stable after seaquake motion. Also, in the case of 2-piles or 4-pile groups, the compressive capacity after seaquake motion was not degraded at all regardless of pile penetration depth beneath seabed, sea water depth and seaquake frequency.

  • PDF

강우침투시 불포화 무한사면의 안정성 평가 (Stability of unsaturated infinite slope under rainfall-induced infiltration)

  • 송영석;황웅기;이남우;김태형
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회
    • /
    • pp.71-78
    • /
    • 2010
  • The stability analysis of unsaturated infinite slope under rainfall-induced infiltration condition was performed using the generalized effective stress that unifies both saturated and unsaturated condition recently proposed by Lu and Likos(2004, 2006). The Soil-Water Characteristic Curve (SWCC) of the sand with the relative density of 75% was first measured for both drying and wetting processes. The Hydraulic Conductivity Function (HCF) and Suction Stress Characteristic Curve (SSCC) were subsequently estimated. Also, under the rainfall-induced infiltration condition transient seepage analysis of unsaturated infinite slope was performed using the finite element program, SEEP/W. Based on these results, the stability of unsaturated infinite slope under rainfall-induced infiltration condition was examined considering the suction stress. According to the results, the negative pore water pressure and water content within the soil changed with time due to the infiltration. Also, the variation of those caused the variation of suction stress and then the factor of safety of slope changed consequently during the rainfall period.

  • PDF

정적 및 동적 하중에서 모래의 액상화 발생 (Occurrence of Sand Liquefaction on Static and Cyclic Loading)

  • 양재혁
    • 한국지반공학회논문집
    • /
    • 제17권6호
    • /
    • pp.235-244
    • /
    • 2001
  • 액상화는 비배수조건에서 흙 강도의 갑작스러운 감소에 기인한다. 이러한 흙 강도의 손실은 과잉간극수압의 발현과 관련된다. 본 연구에서는 최대 및 최소간극비에 영향을 미치는 세립분 함유량이 조사되었다. 또한 포화된 실트질 모래에 대한 정적 및 동적 삼축시험의 결과를 제시하였다. 이들 시험은 액상화강도와 정적 및 동적 거동 특성을 평가하기 위해 수행되었다. 시료는 새만금 유역에서 채취되었으며 공기건조되었다. 결과를 요약하면 다음과 같다. 1) 최대 및 최소간극비선은 유사한 경향으로 나타났다. 2) 최대 및 최소간극비는 20~30%의 세립분 함유량에서 얻어졌다. 3) 구속압력과 과압밀비가 증가할수록 액상화에 대한 저항은 증가하였다. 4) 불안정마찰각은 초기상대밀도의 증가와 함께 커졌다. 5) 유효응력비가 증가함에 따라 액상화에 대한 저항은 감소하였다.

  • PDF

Phenomenological Model to Re-proportion the Ambient Cured Geopolymer Compressed Blocks

  • Radhakrishna, Radhakrishna;Madhava, Tirupati Venu;Manjunath, G.S.;Venugopal, K.
    • International Journal of Concrete Structures and Materials
    • /
    • 제7권3호
    • /
    • pp.193-202
    • /
    • 2013
  • Geopolymer mortar compressed blocks were prepared using fly ash, ground granulated blast furnace slag, silica fume and metakaolin as binders and sand/quarry dust/pond ash as fine aggregate. Alkaline solution was used to activate the source materials for synthesizing the geopolymer mortar. Fresh mortar was used to obtain the compressed blocks. The strength development with reference to different parameters was studied. The different parameters considered were fineness of fly ash, binder components, type of fine aggregate, molarity of alkaline solution, age of specimen, fluid-to-binder ratio, binder-to-aggregate ratio, degree of saturation, etc. The compressed blocks were tested for compression at different ages. It was observed that some of the blocks attained considerable strength within 24 h under ambient conditions. The cardinal aim was to analyze the experimental data generated to formulate a phenomenological model to arrive at the combinations of the ingredients to produce geopolymer blocks to meet the strength development desired at the specified age. The strength data was analyzed within the framework of generalized Abrams' law. It was interesting to note that the law was applicable to the analysis of strength development of partially saturated compressed blocks when the degree of saturation was maintained constant. The validity of phenomenological model was examined with an independent set of experimental data. The blocks can replace the traditional masonry blocks with many advantages.

Characterizing Hydraulic Properties by Grain-Size Analysis of Fluvial Deposits Depending on Stream Path in Korea

  • Oh, Yun-Yeong;Hamm, Se-Yeong;Chung, Sang Yong;Lee, Byeong Dae
    • Environmental Engineering Research
    • /
    • 제18권3호
    • /
    • pp.129-137
    • /
    • 2013
  • The infiltration of rainwater into the surface soil is highly dependent on hydraulic variables, such as the infiltration rate, capillary fringe, moisture content, and unsaturated/saturated hydraulic conductivity. This study estimates the hydraulic conductivity (K) of fluvial deposits at three sites on the right and left banks of Nakdong River in Gyeongbuk Province, South Korea, including the Gumi, Waegwan, and Seongju bridge sites. The K values of 80 samples from 13 boreholes were estimated by using six grain-size methods (Hazen, Slichter, Kozeny, Beyer, Sauerbrei, and Pavchich formulae). The Beyer, Hazen, and Slichter methods showed a better relationship with K values along with an effective grain size than did the other three methods. The grain-size, pumping test, and slug test analyses resulted in different K values, but with similar K values in the grain-size analysis and pumping test. The lower K values of the slug test represent the uppermost fine sand layer.