• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.257-259
• /
• 2006

The Communication Ocean Meteorological Satellite (COMS) is a geostationary satellite being developed by Korea Aerospace Research Institute. Geostationary Ocean Color Imager (GOCI) is one of the payloads embarked on the COMS satellite. It acquires ocean images around Korea in 8 visible spectral bands with a spatial resolution of about 500 m. The acquired data are used to provide forecasting and now casting of the ocean state. The GOCI operations are controlled by the satellite embedded software, i.e. on-board software. This paper introduces the GOCI payload of the COMS satellite and describes the control software for the GOCI.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.221-226
• /
• 2004

For comparing more than two images, the precise geometric corrections should be preceded because it necessary to eliminate systematic errors due to basic sensor information difference and non-systematic errors due to topographical undulations. In this study, we did sensor modeling using satellite sensor information to make a basic map of change detection for artificial topography. We eliminated the systematic errors which can be occurred in photographing conditions using GCP and DEM data. The Kompsat EOC images relief could be reduced by precise rectification method. Classifying images which was used for change detections by city and forest zone, the accuracy of the matching results are increased by 10% and the positioning accuracies also increased.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.146-150
• /
• 2003

Recently remote sensing technology is applied for construction projects planning and design areas by use of high resolution satellite images according to engineering application technology in the various experimental tasks. In this study, It was applied for optimum route selection methods and basic design by comparing to present railway and new expand dual railway route on the new construction plan path of 20 km at national railway lines, and then showed 3-dimensional images and fly simulation images to possibility for various application as low cost and short time compare to airplane and helicopters survey methods. As a results of its applied, It gained the results not only improvement of present methods but also real various application possibilities.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.55-60
• /
• 2007

The purpose of this study is to evaluate the temporal land cover change by gradual urbanization of Gyeongan-cheon watershed. This study used the five land use of Landsat TM satellite images(l987, 1991, 2001, 2004) which were classified by maximum likelihood method. The five land use maps examine its accuracy by error matrix and administrative district statistics. This study analyze land use patterns in the past using time.series Landsat satellite images, and predict 2004 year land use using a CA-Markov combined CA(Cellular Automata) and Markov process, and examine its appropriateness. Finally, predict 2030, 2060 year land use maps by CA-Markov model were constructed from the classified images.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.321-326
• /
• 2003

The subjects of this study are to examine and to apply the methods of making 1:5,000 scale maps using 1m resolution stereo images of IKONOS for the Munsan area of Paju-city where aerial photo surveying cannot possible because of security conditions. GCP(Ground Control Point) were acquired from GPS surveying and were to perform geometric corrections on images. Digital Map used IKONOS stereo images and it worked from the digital analytical stereoplotter. From field investigation, RMSE errors of the plane and vertical positions are estimated to 1.706m and 1.231m, respectively. The plane accuracy is better than an accuracy required by NGIS (national GIS) programs. Local information from field investigation was added and the resulting maps should be good as digital map under the scale of 1/5,000.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.217-219
• /
• 2010

Sensor modeling is the basic step to extract and to use the information from satellite images. Sensor modeling requires ground control points. If we use a single image, we have limitations on modeling about images captured from regions that we can not approach or take GCPs. In this research, we use strip images to do sensor modeling by two methods. At first, we apply sensor modeiling to single image and apply the results by extrapolation. Next, we consider strip images to single image. As a result, we find the second method is more accurate about whole image.

• Korean Journal of Remote Sensing
• /
• v.36 no.4
• /
• pp.545-555
• /
• 2020

This paper focuses on automatic image registration between EO (Electro-Optical) and IR (InfraRed) satellite images with different spectral properties using block-based approach and simple preprocessing technique to enhance the performance of feature matching. If unpreprocessed EO and IR images from Kompsat-3A satellite were applied to local feature matching algorithms(Scale Invariant Feature Transform, Speed-Up Robust Feature, etc.), image registration algorithm generally failed because of few detected feature points or mismatched pairs despite of many detected feature points. In this paper, we proposed a new image registration method which improved the performance of feature matching with block-based registration process on 9-divided image and pre-processing technique based on adaptive histogram equalization. The proposed method showed better performance than without our proposed technique on visual inspection and I-RMSE. This study can be used for automatic image registration between various images acquired from different sensors.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1464-1466
• /
• 2003

classification of the satellite images provides information about land cover and/or land use. Quality of the classification result depends mainly on the spatial and spectral resolutions of the images. In this study, image fusion in terms of resolution merging, and band integration with multi-source of the satellite images; Landsat ETM+ and Ikonos were carried out to improve classification. Resolution merging and band integration could generate imagery of high resolution with more spectral bands. Precise image co-registration is required to remove geometric distortion between different sources of images. Combination of unsupervised and supervised classification of the fused imagery was implemented to improve classification. 3D display of the results was possible by combining DEM with the classification result so that interpretability could be improved.

• Korean Journal of Remote Sensing
• /
• v.19 no.3
• /
• pp.263-269
• /
• 2003

This research examined the capabilities of KOMPSAT-1 EOC images for the application of urban environment, including the urban changes of the study areas. This research is constructed in three stages: Firstly, for the application of change detection techniques, which utilizes multi-temporal remotely sensed data, the data normalization process is carried out. Secondly, the change detection method is applied for the systematic monitoring of land-use changes. Lastly, using the results of the previous stages, the land-use map is updated. Consequently, the patterns of land-use changes are monitored by the proposed scheme. In this research, using the multi-temporal KOMPSAT-1 EOC images and land-use maps, monitoring of urban growth was carried out with the application of land-use changes, and the potential and scope of the application of the EOC images were also examined.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.52-54
• /
• 2022

Aerial images are being one of the important aspects of satellite imagery, delivers effective information on landcovers. Their special characteristics includes the viewpoint from space which clarifies data related to land examining processes. Aerial images taken by satellites employed radio waves to wirelessly transmit images to ground stations. Due to transmission errors, images get distorted and unable to perform in landcover examining. This paper proposes an aerial image enhancement method using deep autoencoders. A properly trained autoencoder can enhance an aerial image to a considerable level of improvement. Results showed that the achieved enhancement is better than that was obtained from traditional image denoising methods.