• 제목/요약/키워드: Satellite Alignment

검색결과 66건 처리시간 0.024초

CBS Ku대역 안테나의 제작/정렬 오차 민감도 해석 (Sensitivity Analysis of the CBS Ku-Band Antenna due to Manufacturing/Alignment Errors)

  • 한재흥;윤소현;엄만석;박종흥;이성팔
    • 한국전자파학회논문지
    • /
    • 제14권2호
    • /
    • pp.168-177
    • /
    • 2003
  • 국내 통신방송위성 Ku 대역 오프셋 파라볼라 안테나의 제작/정렬 오차에 의한 안테나 성능 민감도 해석을 수행하였다. 안테나 반사판의 성형 과정에서 필연적으로 발생하는 반사판 표면의 무작위 오차를 RMS(Root Mean Square) 및 상관 거리로 특성화하여 이에 대한 성능 변화를 통계적으로 분석하였다. 또한, 반사판에 대한 급전 혼의 상대 정렬 위치 및 각 오차에 의한 성능 변화를 파악하였고, 안테나 성능에 민감한 방향을 파악할 수 있었다. 허용 공차를 적용하는 경우 제작/정렬 오차에 의한 성능 저하가 안테나 설계 시의 이득 버짓 또는 각 성능 변수의 설계 여유 내에 있음을 확인하였다.

SiO 기판에 이온빔 조사를 통해서 제조한 IPS Cell의 특성에 관한 연구 (IPS property using ion beam irradiation on SiOF surfaces)

  • 한정민;서대식
    • 한국위성정보통신학회논문지
    • /
    • 제7권3호
    • /
    • pp.54-57
    • /
    • 2012
  • 최근 비접촉식 액정배향방법에 대한 요구가 산업계 전반으로 확산되면서, 기존의 UV 광배향을 비롯하여, 여러 가지 비접촉식 액정 배향방법이 활발히 연구되고 있다. 본 연구에서는 이러한 비접촉식 액정배향방법 중에서 SiOF 무기막에 이온빔을 정량적으로 조사하는 방법을 사용하여 액정을 배향하고, 이 기술을 사용하여, 상용화 수준의 IPS(In-Plane Switching) 방식의 액정 셀을 제작함으로써 전기광학 특성을 평가하였다. 특히 이러한 무기막 배향의 경우 배향안정성에 많은 문제를 가지고 있는 것이 보통이나, 본 연구에서 제안한 방법으로 제조된 평가셀은 $200^{\circ}C$의 높은 온도로 열처리를 하여도 배향성을 잃지 않고 균일한 배향을 지속하는 것을 관찰할 수 있었다.

Physical Origin of the Planar Alignment of Satellite Galaxies

  • Seo, Chanoul;Paudel, Sanjaya;Yoon, Suk-Jin
    • 천문학회보
    • /
    • 제45권1호
    • /
    • pp.33.3-34
    • /
    • 2020
  • The Milky Way (MW) and other systems including M31 and Cen A have flattened structures of their satellites (Disk of Satellites, DoS). Such structures are rare in simulations under the ΛCDM paradigm. DoS is known to depend mainly on 1) the alignment of satellite orbits and 2) the degree of central concentration of satellites. In this work, we examine quantitatively how these two parameters affect the flatness of a system. We find that the MW-like DoS is rare in IllustrisTNG100 simulation because its two parameters are out of the 1-s range and furthermore the MW has a structure more flattened than the other systems having similar parameters. Besides, we propose a new criterion for the MW-like systems superseding the conventional ones such as major-minor axis ratio of the MW's DoS with a value of 0.183. Each satellite system has a specific orbital combination and thus has a particular distribution of its parameters (and thus flatness). The median of the distribution is set as the representative value of each system. And the representative value of the MW can be used as a new criterion for classifying the MW-like DoS. We reconstruct the orbital combination of the observed MW satellites using GAIA DR2 data and find the systems in the simulation that have representative values similar to the new criterion from the reconstructed MW system. This allows us a new interpretation on the rarity of MW-like DoS in cosmological simulations.

  • PDF

On the spatial distribution of satellite galaxies around Milky-way-like galaxies in cosmological simulations

  • Kim, Seoneui;Yoon, Suk-Jin
    • 천문학회보
    • /
    • 제42권2호
    • /
    • pp.72.3-73
    • /
    • 2017
  • The spatial distribution of sub-halos in a large host halo is usually described as isotropic in the ${\Lambda}CDM$ cosmology. Recent observations, however, show that satellite galaxies around massive galaxies are often located within a preferred plane. In order to understand the origin of such planar alignment, we investigate the spatial distribution of sub-halos around their hosts by using the hydrodynamic cosmological simulation, Illustris. In particular, we analyze the systems resembling the Milky Way (MW) and its satellites, i.e. consisting of MW-sized central galaxy and its at least 11 satellites. The result shows that ~10 % of MW-like systems have the anisotropic satellite galaxy distribution at z = 0. The satellites that are accreted more recently tend to form a flattened structure more frequently, indicating a link of satellite distribution to the surrounding environment. We discuss the physical origin of the anisotropic satellite distribution from the viewpoint of the ${\Lambda}CDM$ paradigm.

  • PDF

유도방식 무선충전기용 송수신 장치간 정렬상태 검출기법 (The method of alignment detection between Tx and Rx set in wireless inductive charger)

  • 이상곤;김재명
    • 한국위성정보통신학회논문지
    • /
    • 제9권1호
    • /
    • pp.90-96
    • /
    • 2014
  • 본 논문은 무선충전기에 있어서 효율 증대 기법에 관한 것으로, 송수신 장치간 정렬상태를 수신 장치인 스마트폰에 표시할 수 있는 방법을 제시한다. 구현된 무선충전기는 세계 표준인 WPC( Wireless Power Consortium ) 방식을 기반으로 되어 있어 수 100kHz 이하의 주파수로 동작하고 누설 자속을 최소화할 수 있도록 자기장 차폐제를 사용한 송수신 코일 구조를 갖는다. 송수신 장치의 정렬 상태를 확인할 수 있는 종래 방식은 수신단 코일의 수신 레벨만을 표시하는 단순 방식이지만 본 방식은 수신 장치의 위치까지 알 수 있어 보다 진보된 방식이라 할 수 있다. 무선 충전기 송수신 장치의 정렬상태 검출을 위하여 수신 코일의 위치변화와 자기장 세기가 서로 선형관계에 있음을 확인하고 삼각측량법을 이용하여 이 선형관계가 위치 정보로 변환될 수 있음을 보였다. 실험을 통하여 선형관계에 영향을 미칠 수 있는 요소들을 분석하고 이 요소들을 최적화한 상태에서의 선형 특성을 가질 수 있음을 보였다.

RTK GPS/GLONASS 조합에 의한 도로의 평면선형 정확도 분석 (An Analysis of Accuracy for Road Horizontal Alignment by the Combined RTK GPS/GLONASS)

  • 노태호;장호식;이종출
    • 대한공간정보학회지
    • /
    • 제10권2호
    • /
    • pp.29-37
    • /
    • 2002
  • 도로상에서 발생되는 교통사고의 많은 부분이 도로의 선형불량에 기인된다. 이러한 도로의 개량설계를 위하여서는 도로의 선형을 정확히 분석할 필요가 있으며, 도로의 설계도와 주요진의 좌표가 필요하게 된다. 따라서, 본 연구에서는 현재 많이 연구되고 있는 인공위성 중 RTK GPS/GLONASS의 조합에 의하여 획득된 자료를 기존 설계도의 제원을 근거로 하여 위치정밀도를 비교하였다. 연구 결과 관측된 도로선형 자료는 5cm 범위 내에 포함되었으며, 이렇게 재현된 도로의 선형을 평가함으로써 인공위성을 이용한 도로의 선형정보체계를 보다 효율적이고 실용적으로 사용하기 위한 한 접근방법을 제시하고자 한다.

  • PDF

Considerations for Design and Implementation of a RF Emitter Localization System with Array Antennas

  • Lim, Deok Won;Lim, Soon;Chun, Sebum;Heo, Moon Beom
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제5권1호
    • /
    • pp.37-45
    • /
    • 2016
  • In this paper, design and implementation issues for a network-oriented RF emitter localization system with array antenna are discussed. For hardware, the problem of array mismatch and RF/IF channel mismatch are introduced and the calibration schemes for solving those problems are also provided. For software, it is explained how to overcome the drawback of conventional MUltiple Signal Identification and Classification (MUSIC) algorithm in a point of identifying the number of received signals and problems such as Data Association Problem and Ghost Node Problem in regard to multiple emitter localization are presented with some approaches for getting around those problems. Finally, for implementation, a criterion for arranging each of sensors and a requirement for alignment of array antenna' orientation are also given.

온라인 광학보정장치를 적용한 위성카메라의 광학설계 (Optical Design for Satellite Camera with Online Optical Compensation Movements)

  • 조정빈;황재혁;배재성
    • 한국항공우주학회지
    • /
    • 제43권3호
    • /
    • pp.265-271
    • /
    • 2015
  • 본 연구에서는 소형 위성카메라의 영상성능 저하를 궤도상에서 능동적으로 보정하기 위해 광학보정장치를 적용한 위성카메라의 광학설계를 수행하였다. 2개의 광학 보정장치는 각각 부반사경 및 초점면부에 부착되며 총 5자유도의 운동이 가능하다. 본 논문에서 설계한 광학부는 슈미트-카세그레인(Schmidt-Cassegrain)타입으로 주반사경의 직경은 200mm이고, GSD 3.8m, MTF 성능은 약 50% 정도이다. 설계된 광학계는 수차곡선과 Spot diagram과 MTF를 통해 성능평가를 수행하였다. 수차곡선을 통해 광학성능에 가장 큰 영향을 미치는 수차가 구면수차인 것을 확인 할 수 있고, MTF 해석을 통해서 나이퀴스트 주파수에서 MTF 30%이상의 요구 성능을 충분히 만족하는 것을 확인하였다.

정지궤도복합위성 추진계 배관망 구조해석 (Stress Analysis of the GEO-KOMPSAT-2 Tubing System)

  • 정규;임재혁;채종원;전형열
    • 항공우주시스템공학회지
    • /
    • 제12권1호
    • /
    • pp.47-56
    • /
    • 2018
  • 본 논문에서는 정지궤도복합위성 추진계 배관망의 독자적인 구조해석을 실시하였고, AIRBUS의 구조해석결과와 비교분석을 통해 추진계 배관망의 구조적 건전성 및 해석방법의 신뢰성을 평가하였다. 추진계 배관망의 구조적 신뢰성 확보는 정지궤도복합위성 추진계의 매우 중요한 핵심요소이다. 따라서 CAE 프로그램을 통해 직접 추진계 배관망 모델링을 수행하였고, 발사환경에서 구조해석을 실시하여 응력을 도출하였다. 내압응력해석, 조립정렬해석, 정현파진동해석, 랜덤진동해석의 하중조건에 따라 Hoop stress, Axial stress, Bending stress, Torsion stress를 구하였고, 이를 모두 고려한 von Mises 응력 계산 후 안전여유 결과 값을 도출함으로써 추진계 배관망의 구조적 건전성을 판단하였다.

데오드라이트 시스템을 이용한 위성 안테나 레인지 얼라인먼트 측정 (Range Alignment Measurement for Satellite Antenna by Using Theodolite System)

  • 박홍철;손영선;윤용식
    • 한국항공우주학회지
    • /
    • 제32권6호
    • /
    • pp.134-141
    • /
    • 2004
  • 최근 중 대형 산업품에 대한 비접촉식 3차원 정밀 측정 장비가 개발되고 있다. 이러한 장비 중 하나인 데오드라이트 측정 시스템이 항공우주산업에 널리 활용되고 있다. 본 논문에서는 데오드라이트 시스템을 이용하여 근역장에서의 RF 프로브에 대한 위성체 탑재 안테나의 레인지 얼라인먼트 측정 방법을 기술하였다. Ku-band 및 Ka-band 안테나의 레인지 얼라인먼트 측정 및 조정을 측정 정밀도 ${\pm}1mm$${\pm}0.05^{\circ}$ 이내에서 성공적으로 수행하였다.