• Advances in concrete construction
• /
• 제13권 2호
• /
• pp.153-162
• /
• 2022

Prefabricated exterior wall panel is the main non-load-bearing component of assembly building, which affects the comprehensive performance of thermal insulation and durability of the building. It is of great significance to develop new prefabricated exterior wall panel with durable and lightweight characteristics for the development of energy-saving and assembly building. In the prefabricated sandwich insulation hanging wall panel, the selection of material for the outer layer and the arrangement of the connector of the inner and outer wall layers affect the mechanical performance and durability of the wall panels. In this paper, high performance cement-based composites (HPFRC) are used in the outer layer of the new type wall panel. FRP bars are used as the interface connector. Through experiments and analysis, the influence of the arrangement of connectors on the mechanical behaviors of thin-walled composite wall panel and the panel with window openings under two working conditions are investigated. The failure modes and the role of connectors of thin-walled composite wallboard are analyzed. The influence of the thickness of the wall layer and their combination on the strain growth of the control section, the initial crack resistance, the ultimate bearing capacity and the deformation of the wall panels are analyzed. The research work provides a technical reference for the engineering design of the light-weight thin-walled and durable composite sandwich wall panel.

• Composites Research
• /
• 제36권3호
• /
• pp.173-179
• /
• 2023

The sandwich structure, consisting of a core and a face sheet, is used for lightweight structural application. Generally, cellular structures like honeycomb, foam, and lattice structures are utilized for the core. Among these, lattice structures have several advantages over other types of structures. In other studies, curved lattice structures were reported to have higher mechanical properties than straight structures by converting shear stresses acting on the structure into compressive stresses. Moreover, the addition of vertical struts can have a positive effect on the mechanical properties of the lattice structure. For the purpose, two lattice structures with Circle Arch (CC) and Circular Arch with a vertical column (CC_C) were studied, which were fabricated by using selective laser sintering was conducted. The result showed that CC_C has dramatic performance improvements in specific strength, modulus, and strain energy density compared to CC, confirming that vertical struts played a significant role in the lattice core. Finite element analysis was employed to determine the cause of the stress behavior of CC and CC_C. This study is expected to help design structurally superior lattice cores and sandwich structures.

• Structural Engineering and Mechanics
• /
• 제57권3호
• /
• pp.457-471
• /
• 2016

To analyze laminated composite and sandwich beams under temperature loads, a $C^0$-type Reddy's beam theory considering transverse normal strain is proposed in this paper. Although transverse normal strain is taken into account, the number of unknowns is not increased. Moreover, the first derivatives of transverse displacement have been taken out from the in-plane displacement fields, so that the $C^0$ interpolation functions are only required for the finite element implementation. Based on the proposed model, a three-node beam element is presented for analysis of thermal responses. Numerical results show that the proposed model can accurately and efficiently analyze the thermoelastic problems of laminated composites.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2073-2079
• /
• 2008

This study aims to investigate the residual strength of sandwich composites with Al honeycomb core and carbon fiber face sheets after the quasi-static indentation damage by the experimental investigation. The 3-point bending test and the edge-wise compressive strength test were used to find the mechanical properties. The quasi-static point load and damaged hole was applied to introduce the simulated damage on the Each damaged specimens were finally assessed by the 3-point bending test and the compressive strength test. The investigation results revealed the residual strength of the damaged specimens due to the quasi-static indentation.

• Smart Structures and Systems
• /
• 제23권5호
• /
• pp.429-447
• /
• 2019

The present study analyzed free vibration of the three-layered micro annular/circular plate which its core and face sheets are made of saturated porous materials and FG-CNTRCs, respectively. The structure is subjected to magneto-electric fields and magneto-electro-mechanical pre loads. Mechanical properties of the porous core and also FG-CNTRC face sheets are varied through the thickness direction. Using dynamic Hamilton's principle, the motion equations based on MCS and FSD theories are derived and solved via GDQ as an efficient numerical method. Effect of different parameters such as pores distributions, porosity coefficient, pores compressibility, CNTs distribution, elastic foundation, multi-physical pre loads, small scale parameter and aspect ratio of the plate are investigated. The findings of this study can be useful for designing smart structures such as sensor and actuator.

• Composites Research
• /
• 제30권6호
• /
• pp.384-392
• /
• 2017

인장과 압축하중 모두를 효과적으로 지지할 수 있는 새로운 샌드위치 체결부 구조의 설계를 위해, 체결부 형상이 다른 3가지 샌드위치 판넬에 대한 인장 및 압축 시험을 수행하였다. 샌드위치 판넬의 코어는 주로 알루미늄 플렉스 허니콤이지만, 타 구조물과의 체결을 위해 두께가 얇아지면서 단순 적층판으로 변하는 램프 영역에서는 PMI 폼 코어를 사용하였고, 면재에는 탄소섬유 복합재를 사용하였다. 형상 1에서는 복합재 플랜지와 샌드위치 구조가 일체형으로 연결된다. 형상 2와 3에서는 별도로 제작된 알루미늄 플랜지가 복합재 적층판에 하이록핀과 접착제로 체결된다. 시험 결과 형상 1, 2, 3의 평균 압축파손하중은 각각 295 kN, 226 kN, 291 kN으로 나타났고, 평균 인장파손하중은 각각 47.3(층간분리), 83.7 kN(볼트파손), 291 kN(치구손상)으로 나타났다. 압축 파손하중만을 고려할 경우 플랜지와 샌드위치 판넬을 복합재 일체형으로 제작한 형상 1과 3이 우수한 특성을 보였다. 그러나 형상 1의 경우 인장하중을 받을 때 낮은 하중에서 플랜지 모서리 부분에서 층간분리가 발생하였다. 따라서 인장과 압축하중을 동시에 효과적으로 지지할 수 있는 구조는 모서리에서 층간분리의 위험이 없게 별도의 알루미늄 플랜지를 사용하여 볼트로 체결한 형상 3임을 확인하였다.

• 임산에너지
• /
• 제18권2호
• /
• pp.55-61
• /
• 1999

본 실험에서는 화학조성이 다른 일련의 에틸렌/초산비닐 공중합체의 점탄성(또는 화학조성)이 목재/고분자/목재 샌드위치 복합체의 진동·충격음 흡수성능에 미치는 영향을 검토하였다. 그 결과는 다음과 같다. 복합체의 진동·충격음 흡수성능은 고분자의 분자 운동상태에 민감하다. 즉, 복합체의 진동·충격음 흡수성능 고분자가 시험온도에 있어서 유리전이 상태일 때(대략 초산 비닐 55∼75%) 가장 크며, 고분자가 고무상태(초산비닐 47∼20%) 또는 유리상태(초산비닐 100∼87%)일 때는 작다. 또한 유리전이상태의 고분자 적층재는 약 6∼12dB의 충격음 저감효과가 있었다.

• 한국안전학회지
• /
• 제33권2호
• /
• pp.8-13
• /
• 2018

The light weight composite materials have been replacing in high performance structures. The object of this study is to examine the effects of the initial crack location about a delamination in a PVC foam cored sandwich composite that is used for the strength improvement of structures. The initial crack location and fiber laminates thickness were changed with several types. The MMB specimen was used for evaluating the fracture toughness and crack behaviors. The material used in the experiment is a commercial twill carbon prepreg in CFRP material and Airex in PVC foam core. Sandwich laminate composites are composed by PVC foam core layer between CFRP face sheets. The face sheets were fabricated as 2 types of 5 and 8 plies. The initial cracks were located in a PVC form core and the interface of upper CFRP sheet. From the results, the crack initiation was affected with the location of the initial crack inserted in the PVC foam core. Among them, the initial crack at 1/3 of the upper part of the PVC foam core was the most rapid progression. And the critical energy release rate was $0.40kJ/m^2$, which is the lowest value when the initial crack was inserted into the interface between a PVC foam core and CFRP laminated with 5 plies. Meanwhile, the highest value of $1.27kJ/m^2$ was obtained when the initial crack was located at the center line in case of the 8 plies.

• Composites Research
• /
• 제24권1호
• /
• pp.17-23
• /
• 2011

풀아웃 하중을 받는 복합재 샌드위치 체결부의 파손 거동을 시험으로 연구하였다. 체결의 방식과 코어의 종류를 달리하여 5종류, 총 30개의 시편에 대해 시험을 수행하였다. 시험 결과, 노멕스 하니콤 코어를 사용할 경우 코어의 강성에 의해 지배되는 전단좌굴이 먼저 발생하고, 이후 50~200% 정도의 추가적인 하중을 지지하다가, 면재가 찢어지는 최종파손이 발생하였다. 반면에 PMI 폼을 사용하면 하중 초기에 코어의 전단파손이 발생하며 지지하중도 크게 저하되는 것을 확인하였다. 파손모드를 고려한 설계의 관점에서 볼 때, 노멕스 코어를 사용할 경우 코어의 강성과 면재의 강성 및 강도를 동시에 고려해야 하는 반면, 폼 코어를 사용할 경우 코어의 전단파손 하중을 높이는 것이 가장 중요한 것으로 나타났다.

• Composites Research
• /
• 제26권1호
• /
• pp.29-35
• /
• 2013

복합재료 샌드위치 구조는 굽힘 강성을 향상시키고 복합재 적층판에 비해 30% 이상의 무게를 절감할 수 있다. 그러나 일반 금속에 비해 제작과정에서 발생되는 재료물성의 불확실성이 많이 내재되어 있으므로 신뢰성 기반 확률론적 설계방법이 요구된다. 본 논문에서는 안전계수를 이용한 고전적인 설계 방법이 구조물의 안전을 보장하지 않는다는 확률론적 증거를 제시하기 위하여 단순화된 복합재 샌드위치 동체에 대해 PMS(Probabilistic Margin of Safety)를 계산하였다. 이 과정에서 CMCS(Crude Monte-Carlo Simulation)에 의해 계산된 확률밀도함수를 이용하였다. 더 나아가 신뢰성 기반 최적설계를 수행하고 효율적인 계산을 위해 RBDO-MPDF(RBDO by Moving PDF) 방법을 제시하였다. 본 논문의 결과는 구조물의 신뢰성을 보장하기 위한 개선된 설계 방법과 효율적인 신뢰성 기반 최적설계 방법 연구에 유용할 것이다.