• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.3
• /
• pp.191-208
• /
• 1998

Estimations of dry and wet depositions in Korea and the size distributions of yellow sand above Korea have been carried out using the Eulerian aerosol model with the simulated meteorological data from the SNU mesoscale meteorological model. The estimated particle size distribution in Korea shows a bimodal distribution with peak values at 0.6 pm and 7 pm and a minimum at 2 pm in the lower layer However, as higher up, the bimodal distribution becomes an unimodal distribution with a peak value at 4∼5mm. Among the total amount of yellow sand deflated in the source regions , the dry and wet deposition fluxes were about 92%, and about 1.3∼0.5%, repectively, and the rest(5∼6%) is suspended in the air, Most of dust lifted in the air during the clear weather is deposited in the vicinity of the source regions by dry deposition and the rest undergoes the long -range transport with a gradual removal by the wet deposition processes. Over Korean peninsula, the total amount of yellow sand suspended in the air was about 6∼8% of the emissions in the source region and the dry and wet deposition fluxes were about 0.005∼0.7% and 0.003∼0.051% of the total emitted amount, repectively. It is estimated that 2.7∼8.9 mesa-tons of yellow sand is transported annually over the Korean peninsula with the annual mean dry deposition of 2.1∼490 kilo-tons and the annual mean wet deposition of 1.5∼65 kilo-tons.

• Geomechanics and Engineering
• /
• v.4 no.2
• /
• pp.79-90
• /
• 2012

Air pluviation method is widely adopted for preparation of large, uniform and repeatable sand beds of desired densities for laboratory studies to simulate in-situ conditions and obtain test results which are highly reliable. This paper presents details of a portable traveling pluviator recently developed for model sand bed preparation. The pluviator essentially consisted of a hopper, orifice plates for varying deposition intensity, combination of flexible and rigid tubes for smooth travel of material, and a set of diffuser sieves to obtain uniformity of pluviated sand bed. It was observed that sand beds of lower relative density can be achieved by controlling height of fall, whereas, denser sand beds could be obtained by controlling deposition intensity. Uniformity of pluviated sand beds was evaluated using cone penetration test and at lower relative densities minor variation in density was observed with depth. With increase in relative density of sand bed higher repeatability of uniform pluviation was achieved.

• Journal of Forest and Environmental Science
• /
• v.32 no.2
• /
• pp.212-218
• /
• 2016

The research was conducted windward of an irrigated Acacia amplicips Maslin windbreak established to protect As Salam Cement Plant from winds and moving sands. Two belts with approximate optical porosities of 50% and 20% were studied in River Nile State, Sudan. The research aimed at assessing the efficiency of the two belts in wind speed reduction and sand deposition. Research methods included: (i) estimation of optical porosity, (ii) measurements of windward wind speeds at a control and at distances of 0.5 h (h stands for windbreak height), 1 h and 2 h at two vertical levels of 0.25 h and 0.5 h, (iii) estimation of relative wind speeds at the three positions (distance and height) at windward and (iv) estimation of wind erosive forces and prediction of zones of sand deposition. Results show that while the two belts reduced windward wind speeds at the two levels for the three distances, belt II was more effective. Nearest sand deposition occurred at 2 h and 1h windward of belt II and belt I, respectively, at level 0.25 h. At level 0.5 h, sand was deposited only at 2 h windward of belt II and no sand deposition occurred windward of belt I. The study concludes that less porous windbreaks are more effective in reducing wind speed and in depositing sand in windward direction at a distance of not less than twice the belt height.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.1
• /
• pp.9-17
• /
• 2001

During the period from Jan. to Dec. 1998 and Yellow Sand phenomena, dustfall samples were collected by simple deposit jar and petridish, and calculation of passage amounts of Yellow Sand by the utilization of environmental air monitoring 4 stations from 1995 to 1998 in Seoul. Passage amounts of Yellow Sand were estimated 3,024 ton in 1995, 367 ton in 1996, 105 ton in 1997 and 3,444 ton in 1998 respectively. The highest passage amount of Yellow Sand was marked 3,444 ton in 1998 that is related to frequence of appearance. Average deposition of dusfall was $6.570{\;}ton/\textrm{km}^2$/month during the sampling periods, while average deposition of dusfall in Yellow Sand phenomena was $53.68{\;}ton/\textrm{km}^2$/month which was 8 times higher than average deposition.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2004.06a
• /
• pp.92-106
• /
• 2004

Elemental dry deposition fluxes were measured using dry deposition plates from March to June 1998 in Seoul, Korea. During this spring sampling period several yellow sand events characterized by long-range transport from China and Mongolia impacted the area. Understanding the impact of yellow-sand events on atmospheric dry deposition is critical to managing the heavy metal levels in the environment in Korea. In this study, the measured flux of a primarily crustal metal, Al and an anthropogenic metal, Pb was used with two hybrid receptor models, potential source contribution function (PSCF) and residence time weighted concentration (RTWC) for locating sources of heavy metals associated with atmospheric dry deposition fluxes during the yellow-sand events in Seoul, Korea. The PSCF using a criterion value of the 75th percentile of the measured dry deposition fluxes and RTWC results using the measured elemental dry deposition fluxes agreed well and consistently showed that there were large potential source areas in the Gobi Desert in China and Mongolia and industrial areas near Tianjin, Tangshan, and Shenyang in China. Major industrial areas of Shenyang, Fushun, and Anshan, the Central China loess plateau, the Gobi Desert, and the Alaskan semi-desert in China were identified to be major source areas for the measured Pb flux in Seoul, Korea. For Al, the main industrial areas of Tangshan, Tianjin and Beijing, the Gobi Desert, the Alashan semi-desert, and the Central China loess plateau were found to be the major source areas. These results indicate that both anthropogenic sources such as industrial areas and natural sources such as deserts contribute to the high dry deposition fluxes of both Pb and Al in Seoul, Korea during yellow-sand events. RTWC resolved several high potential source areas. Modeling results indicated that the long-range transport of Al and Pb from China during yellow-sand events as well as non yellow-sand spring daytimes increased atmospheric dry deposition of heavy metals in Korea.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2003.06a
• /
• pp.76-85
• /
• 2003

Mass and elemental dry deposition fluxes and ambient particle size distributions were measured using dry deposition plates and a cascade impactor, from March to November 1998 in Seoul, Korea. During the spring sampling period several yellow sand events characterized by long range transport from China and Mongolia impacted the area. During these events the mass fluxes were statistically the same as during springtime non-yellow-sand events. However, most elemental fluxes were higher. In general, the flux ratios of both crustal (Al, Ca, Mn) and anthropogenic elements (Ni, Pb) to total mass measured during the daytime yellow-sand events were substantially higher than those measured in spring daytime during non-yellow-sand time periods. During all seasons the average measured daytime fluxes were about two times higher than at nighttime. The flux of primarily anthropogenic metals (Cu, Ni, Pb, Zn) and Mn was on average one to two orders of magnitude lower than the flux of the crustal metals Al and Ca. As is typically found two modes, fine (0.1∼l.0 $\mu\textrm{m}$) and coarse (1.0∼10.0 $\mu\textrm{m}$) were present in the measured size distributions (<10 $\mu\textrm{m}$). The particles in the coarse mode constitute a major portion of the measured mass size distribution during the yellow-sand events possibly due to the long-range transport of those particles from China.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.3
• /
• pp.163-170
• /
• 2013

The correlation and interaction mechanisms between marine debris and the vegetation zone were studied on the Jinu-do natural beach of the Nakdong river estuary. Laboratory wind tunnel experiments were carried out under the wind-field and bottom-sand conditions using wind tunnel test equipment to investigate the sedimentation characteristics of wind-drift sand deposition around marine debris and the vegetation zone. The major environmental factors/loads considered in this study were the motion of sand by wind on the beach, deposition of marine debris, and change in the vegetation zone/line. When the marine debris was installed in the wind tunnel, deposition at the front of the structure appeared first by wind action, and then deposition developed from behind at 70% of the front ground level. In contrast, in the case of vegetation, the deposition phenomenon appeared first from behind the vegetation zone/line, and was 60% higher than the front. When the height of the debris and vegetation was the same, the required experimental time to bury the vegetation completely was about twice that of the marine debris.

• Journal of the korean society of oceanography
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2000

A two-dimensional numerical model was applied to investigate the sediment transport and sand bank formation in a macrotidal sea, the Kyunggi and Asan Bays. The tidal residual currents show quite complex pattern including counter-rotating eddies off the northwestern corner of the Dugjeok Island that reflect the promontory effect. Complex residual eddies are also present off the coast of the Taeanbando and in the Asan Bay. Net sediment transport pattern shows that sandy sediments in the Kyunggi and Asan Bays are generally transported landward from the outer sea suggesting sediment trapping inside the bays. This phenomenon may be related to the formation and maintenance of numerous sand banks in this macrotidal sea. Alternate occurrences of deposition and erosion predicted from the numerical model along the coast of the Taeanbando with strong deposition on the southwestern part of the 'Jangansatoe'(JSB), a large sand ridge off the coast of the Taeanbando appear to reflect the loose connection of JSB, The 'Joongangcheontoe', a central sand bank (CSB) with the main axis in the NW-SE direction in the Asan Bay may undergo a modification with strong deposition along the northeastern flank. These results indicate that the sand banks are actively modified and maintained by the strong tidal currents in this shallow macrotidal sea.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.3
• /
• pp.83-92
• /
• 2011

The properties and changes of geomorphic relief and coastal deposits were analyzed at Goreabul sand beach in Yeongdeok-gun, the largest that in east coast of Kyungsangbuk-do Province. As the result of grain size analysis, in almost season except summer, the sands mainly deposited in Goraebul sand beach because longshore current drift northward contrary to Gangwon-do east coast, and summer longshore current is weak or change direction to south ward. Sand beach mostly came form erosion owing to typoon and storm and was deposit more coarse sand in the summer, and was produced deposition actively in the fall and winter. Front side of sand dune came from deposition on sand every season by sea breeze, especially in the winter.

• Advances in environmental research
• /
• v.6 no.1
• /
• pp.35-51
• /
• 2017

The use of Granular Activated Carbon (GAC) and naturally occurring silica (Sand) as filtration media in water and waste water treatment systems is very common. While GAC offers the additional functionality of being an "adsorptive" filter for dissolved organics it is also more expensive. In this paper we present an experimental evaluation of the performance of a bed of GAC for colloid removal and compare the same with that from an equivalent bed of Sand. The experiments are performed in an "intermittent" manner over extended time, to "simulate" performance over the life of the filter bed. The experiments were continued till a significant drop in water flow rate through the bed was observed. A novel "deposition" and "detachment" rate based transient mathematical model is developed. It is observed that the data from the experiments can be explained by the above model, for different aqueous phase electrolyte concentrations. The model "parameters", namely the "deposition" and "detachment" rates are evaluated for the 2 filter media studied. The model suggests that the significantly better performance of GAC in colloid filtration is probably due to significantly lower detachment of colloids from the same. While the "deposition" rates are higher for GAC, the "detachment" rates are significantly lower, which makes GAC more effective than sand for colloid removal by over an order of magnitude.