• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.134-134
• /
• 2003

• Special Issue of the Society of Naval Architects of Korea
• /
• 2015.09a
• /
• pp.14-19
• /
• 2015

Since CAD is advertised 1980s, all across industries have been changed through engineering, manufacturing and inspection. Also marine industry has adopted not only CAD but also various IT systems to make productivity higher. This paper includes research and development to improve traditional draft reading by using IT system, it has focused to build draft database for new vessels, to improve robustness measuring weather condition and to reduce accident possibility.

• Proceedings of the KWS Conference
• /
• 2008.05a
• /
• pp.14-14
• /
• 2008

• Plant Journal
• /
• v.15 no.2
• /
• pp.46-55
• /
• 2019

This paper presents a LNG Liquefaction cycle configuration using two stages of methane expansion (i.e. spliting into two stages as warm & cold to generate an additional inflection point within a cold composite curve) and a single stage of nitrogen expansion to improve the efficiency of the conventional Methane & Nitrogen Expansion Cycle. In comparison with Double Nitrogen Expansion Cycel and Methane & Nitrogen Expansion Cycle, the cycle efficiency has increased approximately from 13.92 and 13.13 to 12.08 kW/ton/day (8~15% efficiency increase). A Life Cycle Cost (LCC) analysis based on Net Present Value (NPV) also show an improvement in therms of project NPV, against a minor increment of a CAPEX.

• Proceedings of the KWS Conference
• /
• 2008.05a
• /
• pp.28-28
• /
• 2008

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.94.2-94
• /
• 2002

$\textbullet$ The method to have real-time response at the motion control. $\textbullet$ The trajectory generation method guarantees the continuous acceleration in changing the velocity during the actuator is moving. $\textbullet$ We propose the velocity profile generation algorithm in order to change object position or object velocity with continuous acceleration using blending method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.791-796
• /
• 2000

The cavitation-induced fluctuating pressure of the container ship named "Sydney Express" is measured in Samsung Large Cavitation Tunnel(SCAT). In the measurements, a complete ship model is employed. The effects of thrust coefficient and cavitation number on cavity pattern and cavitation-induced fluctuating pressure were investigated experimentally. It is demonstrated that the fluctuating pressure coefficient is very sensitive to the cavitation number. The results of cavitation and pressure fluctuations are compared with those of ITTC and HSVA, which shows fairly good agreement. It is exhibited that the removal of rudder can significantly change the loading condition of a propeller, and can reduce the fluctuating pressure coefficient almost by half.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.363-379
• /
• 2014

In an effort to cope with recent high oil price and global warming, developments of air lubricated ships have been pursued to reduce greenhouse gas emissions and to save fuel costs by reducing the frictional resistance. In this study, reduction in the frictional resistance by air lubrication with air layers generated on the lower surface of a flat plate was investigated experimentally in the large water tunnel of SSMB. The generated air layers were observed, and changes in the local frictional drag were measured at various flow rates of injected air. The results indicated that air lubrication with air layers might be useful in reducing the frictional resistance at specific conditions of air injection. Accordingly, resistance and self-propulsion tests for a 66K DWT bulk carrier were carried out in the towing tank of SSMB to estimate the expected net power savings.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.115-122
• /
• 2009

In shipbuilding process, automated marking systems are used to print steel part information on the steel plate. Especially, an automated marking system with a moving ink-head prints characters on each block, which divide the steel plate into a fixed size. Therefore it is necessary to split characters, because some characters can be extended into several blocks. Particularly the algorithm, which splits characters, must guarantee its printing quality in any direction since characters can be printed by any angle.

• Proceedings of the KWS Conference
• /
• 2008.05a
• /
• pp.22-22
• /
• 2008