• Nuclear Engineering and Technology
• /
• v.43 no.4
• /
• pp.399-404
• /
• 2011

A LEGO-type multi-purpose dosimetry phantom was developed for intensity-modulated radiation therapy (IMRT), which requires various types of challenging dosimetry. Polystyrene, polyethylene, polytetrafluoroethylene (PTFE), and polyurethane foam (PU-F) were selected to represent muscle, fat, bone, and lung tissue, respectively, after considering the relevant mass densities, elemental compositions, effective atomic numbers, and photon interaction coefficients. The phantom, which is composed of numerous small pieces that are similar to LEGO blocks, provides dose and dose distribution measurements in homogeneous and heterogeneous media. The phantom includes dosimeter holders for several types of dosimeters that are frequently used in IMRT dosimetry. An ion chamber and a diode detector were used to test dosimetry in heterogeneous media under radiation fields of various sizes. The data that were measured using these dosimeters were in disagreement when the field sizes were smaller than $1.5{\times}1.5\;cm^2$ for polystyrene and PTFE, or smaller than $3{\times}3\;cm^2$ for an air cavity. The discrepancy was as large as 41% for the air cavity when the field size was $0.7{\times}0.7\;cm^2$, highlighting one of the challenges of IMRT small field dosimetry. The LEGO-type phantom is also very useful for two-dimensional dosimetry analysis, which elucidates the electronic dis-equilibrium phenomena on or near the heterogeneity boundaries.

• Journal of Biomedical Engineering Research
• /
• v.32 no.3
• /
• pp.198-206
• /
• 2011

Hearing devices like cochlear implant, vibrant soundbridge, etc. try to offer better sound for people. In hearing devices, several beamformers including conventional directional microphone are applicable to noise reduction. Each beamformer has different directional response and it could change sound intelligibility or quality for listeners. Therefore, we investigated the performance of three beamformers, which are first and second order directional microphone, and broadband beamformer(BBF) with a computer simulation assuming hearing device microphone configuration. We also calculated objective measurements which have been used to evaluate speech enhancement algorithms. In the simulation, a single speech and a single babble noisewere propagated from the front and $135^{\circ}$ azimuth degrees respectively. Microphones were configured in an end-fire array and the spacing was varied in comparison. With 3 cm spacing, BBF had about 3 dB higher enhanced SNR than that of directional microphones. However, enhancement of segmental SNR and frequency weighted segmental SNR were similar between the first order directional microphone and broadband beamformer. In addition when steady state noise was used, broadband beamformer showed the increased performance and had the highest enhanced SNR, and segmental SNR.

• Journal of the Korean Chemical Society
• /
• v.46 no.2
• /
• pp.164-168
• /
• 2002

SrGa$_2$S$_4$ : Eu is a green emitting phosphor which is applied for field emission display, and cathodoluminescence. Conventionally, SrGa$_2$S$_4$ : Eu is synthesized by solid state reaction, in which a mixture of SrCO$_3$, Ga$_2$O$_3$, and Eu$_2$O$_3$ is fired at high temperatures under flowing H$_2$S and Ar gases. In this study,SrGa$_2$S$_4$ : Eu phosphor is synthesized by using a decomposition method, where SrS, Eu complex, and Ga com-plex are used. The advantage of this method is that toxic H$_2$S gas and Ar gas are not used. The synthetic con-ditions and luminescent properties of SrGa$_2$S$_4$ : Eu phosphor are also investigated.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.277-280
• /
• 2011

We studied the relative stability and atomic structure of five $C_{20}^{2+}$ isomers obtained by two-electron ionization of a $C_{20}$ cage (the smallest fullerene). All the isomers are bond-stretch isomers, i.e., they differ in bond length. In particular, in one of the isomers with Ih symmetry, all the bond lengths are equal. Full geometry optimizations of the dipositive ion $C_{20}^{2+}$ were performed using the hybrid density functional (B3LYP/6-31G(d)) methods. All isomers were found to be true minima by frequency analysis at the level of B3LYP/6-31G(d) under the reinforced tight convergence criterion and a pruned (99,590) grid. The zero-point correction energy for the cage bond-stretch isomers was in the increasing order $D_{2h}<C_{2h}<C_2<T_h<I_h$ of $C_{20}^{2+}$. The energy difference among the isomers of cage dipositive ions was less than that among neutral cage isomers. Our results suggest that these isomers show bond-stretch isomerism and that they have an identical spin state and an identical potential energy curve. Although the predominant electronic configurations of the isomers are similar, the frontier orbital characteristics are different, implying that we could anticipate an entirely different set of characteristic chemical reactions for each type of HOMO and LUMO.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.310-315
• /
• 2008

In this study, experimental study on the heating performance of a $CO_2$ heat pump water heater with a variation of operating conditions such as refrigerant charge amount, outdoor temperature, compressor frequency, EEV opening and water mass flow rate. Based on the test results, the optimum charge amount was 1800 g. At the water mass flow rates of 75, 85, 95 kg/hr, the water heating temperature was 62, 67, $74^{\circ}C$ and COP was 2.6, 2.8, 3.0, respectively. Besides, the water mass flow rate and compressor frequency were varied to maintain above the water heating temperature of $60^{\circ}C$ with the decrease of outdoor temperature. So, The compressor frequency increased beyond 65 Hz and the water mass flow rate was 45 kg/hr at the outdoor temperature of $-13^{\circ}C$, 65 kg/hr at $-8^{\circ}C$, 75 kg/hr at $-3^{\circ}C$ and 85 kg/hr at 2, $7^{\circ}C$. As the outdoor temperature decreased, the heating COP decreased by 2.5-39.8%.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.4 s.304
• /
• pp.13-20
• /
• 2005

In this paper, we propose new smoothing filters, i.e., occluding patterns that can accurately correct disparities of occluded areas in the estimated disparity map. An image is composed of several layers and each layer presents similar disparity. Furthermore, the distribution of the estimated disparities has a specific direction around the boundary of the occlusion, and this distribution presents the different direction with respect to the left- and the right-based disparity map. However, typical smoothing filters, such as mean filter and median filter, did not take into account those characteristic. So, they can decrease some error, but they cannot guarantee the accuracy of the corrected disparity. On the contrary, occluding patterns can accurately correct disparities of occluded areas because they consider both the characteristic that occlusion occurs and the characteristic that disparities of the occlusion are ranged, from estimated disparity maps with respect to the left and the right images. We made experiments on occluding patterns with some real stereo image set, and as a result, we can correct disparities of occluded areas more accurately than typical smoothing filters did.

• Physical Therapy Rehabilitation Science
• /
• v.7 no.1
• /
• pp.23-28
• /
• 2018

Objective: The purpose of this study was to investigate the impact of wearing various types of shoes on gait ability in stroke survivors and in order to gain information in regards to shoes that could possibly replace ankle orthosis. Design: Cross-sectional study. Methods: Eight hemiplegic survivors diagnosed with stroke participated in the study. Gait was analyzed using the GAITRite Electronic Walkway (CIR System Inc., USA) when subjects walked with no showed, walked with non-ankle-covered shoes, and walked with ankle-covered shoes. This study collected gait variables, including velocity, cadence, step length, stride length, single support time, and double support time, respectively. Results: In the comparison of walking with no shoes, non-ankle-covered shoes, and ankle-covered shoes, there were significant differences in gait velocity, step length, stride length, and the less affected side single support time (p<0.05). However, there were no significant differences in cadence, affected side single support time, and double support time. Conclusions: Ankle-covered shoes had a positive impact on the gait of stroke survivors. However, it is necessary to conduct more studies comparing various types of shoes with ankle orthoses.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.12
• /
• pp.1380-1387
• /
• 2012

The transmit/receive(T/R) module is a key component in the active phased array system. The brick-type T/R module has been widely used and the miniaturization has been an important factor to get the flexibility of the system configuration. For the miniaturization, multi-function chips(MFC) having a common leg configuration are suitable to reduce the number of required MMICs and a high isolation between transmit and receive paths is necessary for the high gain T/R modules. In this work, we propose a bias timing scheme for the compact T/R module and show the optimum timing based on measurements, in order to improve the feed-back path loop problem and the consequent isolation problem of the common leg configuration. We have implemented high power(7 W/channel) and high T/R gain(35 dB transmit and 30 dB receive gains) within the half size($140{\times}80{\times}16mm^3$) of the conventional T/R modules.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2865-2874
• /
• 2013

Recently, most of movies top-ranked in the box office are screening in Stereoscopic 3D, and the world's leading electronics companies such as Samsung and LG are getting the hots for 3DTV sales. However, each person has different binocular disparity and different viewing distance, and thus he or she feels the severe visual fatigue and headaches if he or she is watching 3D content with the same binocular disparity, which is very different from things he or she feels in the real world. To solve this problem, this paper proposes and implement a 3D rendering system that correct the disparity of 3D content by reflecting binocular distance and viewing distance. Then, the computational complexity is analyzed. Optical-flow and Warping algorithms turn out to consume 732 seconds and 5.7 seconds per frame, respectively. Therefore, a dedicated chip-set for both blocks is strongly required for real-time HD 3D display.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1514-1519
• /
• 2009

We fabricated the GaNLED emitting 400 nm wavelength and improved the optical extraction efficiency by making surface patterns on n-GaN layer and ITO layer above p-GaN. In addition, the light reflection metal under the n and p pad is made and the light reflection metal is installed on the backside of the chip. The light extraction efficiency is increased by 20 % with texturing n-GaN layer and 18% with texturing ITO layer at 20 mA. Compared to planar-surface LED, the light extraction efficiency for surface texturing both n-GaN and ITO is increased by 32% at 20mA.