• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2008년도 춘계학술대회 논문집
• /
• pp.139-141
• /
• 2008

• 한국대기환경학회지
• /
• 제23권1호
• /
• pp.74-83
• /
• 2007

Artifacts due to inter-particle and gas-particle interactions during PM2.5 sampling were quantified by comparing the measurement results between the annular denuder-filterpack system and the filterpack system without denuder. Measurements were carried in Seoul for 10 days in each season; Nov. 2004, Jan. 2005, Mar. 2005, and Jul. 2005, respectively. In each day, two 12-h samples were obtained. The concentrations of nitrate and chloride showed seasonal variations mainly due to the availability of ammonium to neutralize nitrate or chloride. Nitrates and chloride losses were prominent in summer. Since most of ammonia was used to neutralize sulfuric acid and formed ammonium sulfate in summer, nitrate and chloride could not exist in particles and ammonium loss was smaller than other seasons.

• Asian Journal of Atmospheric Environment
• /
• 제11권2호
• /
• pp.107-113
• /
• 2017

This study describes (1) the impact of positive sampling artifacts caused by not only a filter-based sampling, but also a denuder-based sampling in the determination of particle-phase organic carbon (POC), (2) the effect of sample flow rate on positive artifacts, and (3) an optimum flow rate that provides a minimized negative sampling artifact for the denuder-based sampling method. To achieve the goals of this study, four different sampling media combinations were employed: (1) Quartz filter-alone (Q-alone), (2) quartz filter behind quartz-fiber filter (QBQ), (3) quartz filter and quartz filter behind Teflon filter (Q-QBT), and (4) quartz filter behind carbon-based denuder (Denuder-Q). The measurement of ambient POC was carried out in an urban area. In addition, to determine gas-phase OC (GOC) removal efficiency of the denuder, a Teflon filter and a quartz filter were deployed upstream and downstream of the denuder, respectively with varying sample flow rates: 5, 10, 20, and 30 LPM. It was found that Q-alone sampling configuration showed a higher POC than QBQ, Q-QBT, and Denuder-Q by 12%, 28%, and 23%, respectively at a sample flow rate of 20 LPM due to no correction for positive artifact caused by adsorption of GOC onto the filter. A lower quantity of GOC was collected from the backup quartz filter on QBQ than that from Q-QBT. This was because GOC was not in equilibrium with that adsorbed on the front quartz filter of QBQ during the sampling period. It is observed that the loss of particle number and mass across the denuder increases with decreasing sample flow rate. The contribution o f positive arti facts to POC decreased with increasing sample flow rate, showing 29%, 25%, and 22% for 10, 20, and 30 LPM, respectively. The 20 LPM turns out to be the optimum sample flow rate for both filter and denuder-based POC sampling.

• 대한의용생체공학회:의공학회지
• /
• 제35권5호
• /
• pp.132-141
• /
• 2014

In an ordinary CT scan, a large number of projections with full field-of-view (FFOV) are necessary to reconstruct high resolution images. However, excessive x-ray dosage is a great concern in FFOV scan. Region-of-interest (ROI) CT or sparse-view CT is considered to be a solution to reduce x-ray dosage in CT scanning, but it suffers from bright-band artifacts or streak artifacts giving contrast anomaly in the reconstructed image. In this study, we propose an image reconstruction method to eliminate the bright-band artifacts and the streak artifacts simultaneously. In addition to the ROI scan for the interior projection data with relatively high sampling rate in the view direction, we get sparse-view exterior projection data with much lower sampling rate. Then, we reconstruct images by solving a constrained total variation (TV) minimization problem for the interior projection data, which is assisted by the exterior projection data in the compressed sensing (CS) framework. For the interior image reconstruction assisted by the exterior projection data, we implemented the proposed method which enforces dual data fidelity terms and a TV term. The proposed method has effectively suppressed the bright-band artifacts around the ROI boundary and the streak artifacts in the ROI image. We expect the proposed method can be used for low-dose CT scans based on limited x-ray exposure to a small ROI in the human body.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2006년도 추계학술대회 논문집
• /
• pp.123-124
• /
• 2006

• 보존과학연구
• /
• 통권21호
• /
• pp.177-206
• /
• 2000

In the study of iron artifacts, microstructure investigation is an indispensable step to find out the manufacturing method and skill. The iron weapons that we have excavated and investigated at the ruins of Gohyun Castle site, Hadong-gun, Kyungnam Province are traced to the era of Choson Dynasty. By sampling specimens of some artifacts, we have made microstructure investigation and component analysis of them. For microstructure investigation we used metallographic microscopes, and for component analysis we used the methods of C/S analysis and Inductively coupled plasma emission spectrometry (ICP) analysis which is designed to verify components and contenets of a very small amount elememt. Microstructure of the artifacts is mainly divided into three parts. Inner part is Widmanstatten, a typical overheated structure, upon which we can see another part with fine grains and with extremely small quantities of carbon. And on the surface, there is a carbonized part. When the shape is formed through forging process at a high temperature the carbon content of the surface is getting down and the grains come to be finer. Next, carbonizing process is to be done for hardening the surface, which is followed by cooling process. Cooling rates seem to be different from artifacts to artifacts. All artifacts have clearly distinguishable grain boundaries in their unique structure. Since this kind of structure is rarely found, it seems to offer a clue to find out the manufacturing method. The outcome of component analysis is almost the same with that of microstructure investigation. As is demonstrated by C/S analysis, carbon content is 0.39-1.24% and sulfur is contained 0.0005-0.010%.

• 보존과학회지
• /
• 제3권1호
• /
• pp.31-48
• /
• 1994

• 대한전자공학회논문지
• /
• 제16권6호
• /
• pp.22-30
• /
• 1979

새로운 구조의 양전자 전산 단층 촬영기(Positron Computerized Tomography)를 제안하고 그 시스템의 성능을 컴퓨터로 예측하였다. 이 새로운 구조의 시스템은 sampling 간격을 임의로 할 수 있기 때문에 기존의 시스템에 비해서 보다 높은 분해능의 단층 영상을 얻을 수 있다. 컴퓨터 시뮬레이션으로 이 시스템에 어떠한 artifact가 생기나 살펴 보았고 Poisson noiserk 더해졌을 때의 영상을 비교함으로써 이 시스템이 기존의 시스템보다 나은 영상을 얻을 수 있음을 확인하였다.

• 한국광학회지
• /
• 제7권4호
• /
• pp.322-327
• /
• 1996

실물을 이용한 홀로그램과 다르게 홀로그래픽 스테레오그램은 비교적 적은 수의 2차원 영상정보를 합성하여 제작된다. 부적절한 샘플링에 의해 나타나는 영상 사이의 간섭특성을 조사하였으며 새로운 샘플링 이론을 제안하고 이를 홀로그래픽 스테레오그램 제작에 이용하였다. 또한 관찰범위를 확대하기 위한 광학 시스템을 제시하였다. 이러한 분석결과들은 일반적인 홀로그래픽 스테레오그램의 제작과 컴퓨터를 이용한 홀로그래픽 스테레오그램의 제작에 응용할 수 있다.

• 한국의학물리학회지:의학물리
• /
• 제25권4호
• /
• pp.271-280
• /
• 2014

최근에 디지털 유방촬영술(digital mammography, DM)의 해부학적 구조의 겹침 현상과 컴퓨터단층촬영영상(computed tomography, CT)의 높은 환자 선량을 해결하기 위해 디지털 유방단층영상합성장치(digital breast tomosynthesis, DBT)에 대한 연구 개발이 활발하게 수행되고 있다. 하지만 DBT 시스템은 제한된 각도로 영상을 획득하면서 급격한 데이터 결핍으로 인해 다른 층의 간섭으로 인한 인공물(artifacts)이 발생한다. 이를 완화시키기 위해 적절한 필터가 필요하다. 본 논문에서는 DBT 시스템에서 FBP 알고리즘을 이용하여 영상재구성 시 발생되는 인공물을 줄이기 위해 적절한 필터조합을 찾는 것이 궁극적인 목적이다. 시뮬레이션과 실제 실험을 통해 동일한 영상 획득조건에서 FBP 알고리즘을 이용해 재구성된 영상을 분석하여 다양한 필터 조합들의 특성을 조사했다. 필터 특성에 대한 평가를 하기 위해 영상 및 프로파일의 분석과 COV (coefficient of variation)를 이용하여 인공물과 잡음에 대한 평가를 하였다. 본 연구 결과를 통해 분광필터(spectral filter)의 파라미터 인자 값들을 조절하여 cut-off frequency를 설정함으로써 고주파 영역에 있는 영상의 잡음을 줄일 수 있었다. DBT 시스템에서 유방팬텀을 재구성한 영상들을 비교했을 때 분광필터의 파라미터 인자를 0.25로 적용한 영상의 결과는 분광필터를 적용하지 않았을 때보다 영상의 잡음을 10%로 감소시킬 수 있었다. 절편두께필터(slice thickness filter)의 파라미터 인자의 값들을 조절하여 정보들의 불균형을 줄임으로써 다른 층의 간섭으로 인한 인공물을 감소시킬 수 있었다. 결론적으로, 본 연구를 통해 FBP 알고리즘으로 재구성했을 때 필터들의 기본 특성을 확인 할 수 있었으며, 적절한 필터 조합이 실제 화질 개선에 기여한 것으로 확인할 수 있었다. 이 연구 결과는 다양한 필터 조합에 따른 잡음과 데이터 결핍에 의한 인공물에 대한 정보를 제공하여 DBT 시스템의 개발 및 임상화적용 연구에 기반이 될 것으로 기대된다.