• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.224-226
• /
• 2004

Digital Kalman filter is presented as a powerful approach to obtain the reference estimation of the control current for shunt active power filter. This algorithm provides the best estimate of the fundamental and harmonic frequency components from the sampled values of the line current or voltage. By adopting of the digital Kalman filtering algorithm, the structure of the control algorithm eliminates the need of a Phase locked loop(PLL) for the synchronization of the reference signal used in the compensation and it not sensitive to the distortion of the line voltage. The effectiveness of the algorithm is confirmed by the computer simulations.

• Nuclear Engineering and Technology
• /
• v.30 no.3
• /
• pp.235-244
• /
• 1998

The parametric model method determines the accident source term which is Presented by a set of source term parameters. In this method, the cumulative distribution of each source term parameter should be derived for its uncertainty analysis. This paper introduces a method of generating the parameters in the form of cumulative distribution using MAAP version 4.0. In MAAP, there are model parameters which could incorporate uncertain physical and/or chemical phenomena. In general, the model parameters do not have a point value but a range. In this paper, considering that, the input values of model parameters influencing each parameter are sampled using LHS. Then, the computation results are shown in cumulative distribution form. For a case study, the CDFs of FCOR and WES of Kori Unit 1 are derived. The target scenarios for the computation are the ones whose initial events are large LOCA, small LOCA and transient, respectively. It is found that the computed CDF's in this study are consistent to those of NUREG-1150 and the use of MAAP is proven to be adequate in assessing the parameters of the severe accident source term.

• Journal of the Optical Society of Korea
• /
• v.1 no.1
• /
• pp.60-64
• /
• 1997

An image processing algorithm is presented that can identify the orientation as well as the left/right side (parity) of the digitized radiographs. The orientation was found by computing the mean square deviation between the sampled gray values along the center and their best-fit linear regression relations. The parity was determined by comparing the area difference between two thresholded images of the left and the right side around the heart, which is assumed to be around the center of the image. This method was tested with 86 images with their orientations intentionally rotated. The rotation was limited to multiples of 90 degrees, as this was the way the rotation is most likely to happen in the clinical environment. We obtained positive responses for 85 out of 86 images subject to the screening.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.48-53
• /
• 2007

A new way to integrate various geophysical information for evaluation of RQD was developed. In this study, we did not directly define the RQD value where borehole data are not sampled. Instead, we infer the probability of RQD values with prior probability from borehole direct data, and secondary supporting probability from resistivity and seismic tomography data. For the integration, we applied the geostatstical indicator kriging to get prior probability of RQD value, and indicator kriging with soft data to get the supporting probability from resistivity and seismic data. And we finally use the permanence ratio rule to integrate these information. The finally obtained result was also analyzed to fully utilize the probabilistic features. We show the probability of wrongly classifying the RQD evaluation and vice versa. This result may be used for decision making process based on the geophysical exploration.

• Animal cells and systems
• /
• v.1 no.4
• /
• pp.535-538
• /
• 1997

Allozyme variation of seven enzyme systems was analyzed from 202 individuals from four Korean populations of Atractomorpha lata. These populations exhibit higher levels of values of in most other insects with a mean 64% of polymorphic loci and a mean 0.384 of expected heterozygosity within populations. Fixation indices indicated considerable substructuring within populations sampled (mean $F_{is}=0.403)$, indicating probable inbreeding or assortative mating coupled with restricted migration between subpopulations. This was supported by the field observation that the species exists as small, discrete colonies in meadow habitats and females carry males. In addition, significant differences in allere frequencies between males and females at polymorphic loci examined (70%, 16 of 23 cases) could account for the observed heterozygote deficiencies.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.1
• /
• pp.22-27
• /
• 1999

This study was performed to investigated the contamination levels of harmful heavy metals were sampled from Aug. 1 to Aug. 31, 1997, at 9 areas in Cheonbuk area. The heavy metal contents were determinated by ICPS(Inductively Coupled Plasma Spectrometer) method. The levels of total lead, cadmium, aluminum, iron and copper were determined and the results were summarized as follows: The minimum and maximum values(ppm) of 9 areas of Carassius auratus were Pb: 2.03~6.19, Cd: 0.06~ 0.76, Al: 8.84~23.5, Zn: 10.68~48.71, Cu: 0.60~1.51ppm. Among the five heavy metals contents, the highest was zinc and the lowest was cadmium. The results showed that the contents of Pb, Cd, Al, Zn and Cu in Carassius auratus were lower than the FAO/WHO maximum allowance.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1480-1485
• /
• 2004

In this paper, a real-time digital kalman filtering algorithm is used to obtain the reference estimation of the control current for shunt active power filter. This algorithm provides the best estimate of the fundamental and harmonic frequency components from the sampled values of the line current or voltage waveform. By adopting of the digital Kalman filtering algorithm, the structure of the control algorithm eliminates the need of a Phase locked loop(PLL) for the synchronization of the reference signal used in the compensation and it not sensitive to the distortion of the line voltage. The effectiveness of the algorithm is confirmed by the computer simulations.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.4
• /
• pp.144-150
• /
• 2006

IEC 61850 is the worldwide protocol for the substation automation system. IEC 61850 transports the information which consists of different formats such as GOOSE(Generic Object Oriented Substation Event), MMS(Manufacturing Message Specification), SV(Sampled Values) and so on. For real time data transmission, GOOSE can be used. The remote-bus current data which were collected in a local-bus current differential IED can be transmitted to a distance IED at the same location by using GOOSE messages. The distance IED can eliminate the reactance effect by using the transmitted remote-bus current data. This method can improve the performance of the fault location.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.1
• /
• pp.85-95
• /
• 2008

This study was carried out to analyze Sungkyunkwan University Forest vegetation at Pocheon. Employing the releve method of Braun-Blanquet, 20 plots were sampled. The communities were classified into Larix leptolepis community, Quercus mongolica community, Pinus koraiensis community and Pinus densiflora community. Average coverage rate was 91% in tree layer, 39% in subtree layer, 44% in shrub layer, 43% in herb layer, respectively. The importance values were 61.79% in Larix leptolepis, 52.08% in Quercus mongolica, 44.6% in Pinus koraiensis, 30.35% in Pinus densiflora, 17.78% in Styrax obassia, 10.9% in Fraxinus rhynchophyllia. DBH range of most Quercus mongolica was between 6cm and 15cm. Therefore, Quercus mongolica will be dominant species in the study area for several more decades.

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.3
• /
• pp.25-31
• /
• 1991

The formation process of hydrocarbon emissions was investigated in SI engine. The time- resolved concentrations of hydrocarbon emissions were measured using a high gas sampling valve and a gas chromatography. The gas was sampled at exhaust port, or the position of spark plug, or the wall of combustion chamber. The experiments were conducted using the Alpha engine of Hyundai Motor Company. The fuel used was methanol or propane. It was found that the effect of the quenching layer of combustion chamber wall on hydrocarbon emissions was not significant. The increasing rate of hydrocarbon concentration at combustion chamber wall near crevice and oil layer after flame was reached was much higher than that at the position of spark plug. The hydrocarbon concentrations at exhaust port had two peak values just after opening exhaust valve and just before closing it.