• Journal of the Korean Geotechnical Society
• /
• v.25 no.12
• /
• pp.57-67
• /
• 2009

Along with the advanced construction technologies, the maximum size of coarse aggregate used for dam construction ranges from several cm to 1m. Testing the original gradation samples is not only expensive but also causes many technical difficulties. Generally, indoor tests are performed on the samples with the parallel grading method after which the results are applied to the design and interpretation of the actual geotechnical structure. In order to anticipate the exact behavior characteristics for the geotechnical structure, it is necessary to understand the changes in the shear behavior. In this study, the Large Triaxial Test was performed on the parallel grading method samples that were restructured with river bed sand-gravel, with a different maximum size, which is the material that was used to construct Dam B in Korea. And the Stress - Strain characteristics of the parallel grading method samples and the characteristics of the shear strength were compared and analyzed. In the test results, the coarse-grained showed strain softening and expansion behavior of the volume, which became more obvious as the maximum size increased. The internal angle of friction and the shear strength appeared to increase as the maximum size of the parallel grading method sample increased.

• Structural Engineering and Mechanics
• /
• v.81 no.2
• /
• pp.243-258
• /
• 2022

In this paper, tensile behavior of joint filling has been investigated under experimental test and numerical simulation (particle flow code). Two concrete slabs containing semi cylinder hole were prepared. These slabs were attached to each other by glue and one cubic specimen with dimension of 19 cm×15 cm×6 cm was prepared. This sample placed in the universal testing machine where the direct tensile stress can be applied to this specimen by implementing a special type of load transferring device which converts the applied compressive load to that of the tensile during the test. In the present work, two different joint filling thickness i.e., 3 mm and 6 mm were prepared and tested in the laboratory to measure their direct tensile strengths. Concurrent with experimental test, numerical simulation was performed to investigate the effect of hole diameter, length of edge notch, filling thickness and filling length on the tensile behavior of joint filling. Model dimension was 19 cm×15 cm. hole diameter was change in four different values of 2.5 cm, 5 cm, 7.5 cm and 10 cm. glue lengths were different based on the hole diameter, i.e., 12.5 cm for hole diameter of 2.5 cm, 10 cm for hole diameter of 5 cm, 7.5 cm for hole diameter of 7.5 cm and 5 cm for hole diameter of 10 cm. length of edge notch were changed in three different value i.e., 10%, 30% and 50% of glue length. Filling thickness were changed in three different value of 3 mm, 6 mm and 9 mm. Tensile strengths of glue and concrete were 2.37 MPa and 6.4 MPa, respectively. The load was applied at a constant rate of 1 kg/s. Results shows that hole diameter, length of edge notch, filling thickness and filling length have important effect on the tensile behavior of joint filling. In fixed glue thinks and fixed joint length, the tensile strength was decreased by increasing the hole diameter. Comparing the results showed that the strength, failure mechanism and fracture patterns obtained numerically and experimentally were similar for both cases.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1460-1467
• /
• 2023

A robust approach was conducted to determining the absolute oral bioavailable (f_ab) fractions of ²³⁸U and ²³²Th in rats exposed to contaminated soil along with their hematotoxicity and nephrotoxicity. The soil sample is the International Atomic Energy Agency-312 (IAEA-312) certified reference material, whereas blood, bones, and kidneys of in vivo female Sprague-Dawley (SD) rats estimate ²³⁸U- and ²³²Th-f_ab fractions post-exposure. We predict the bioavailable concentration (C_ab) and f_ab values of ²³⁸U and ²³²Th after acute soil ingestion. The blood ²³⁸U (0.750%) and ²³²Th (0.028%) reach their maximum f_ab values after 48 h. The ²³⁸U (f_ab: 0.169-0.652%) accumulates mostly in the kidney, whereas the ²³²Th (f_ab: 0.004-0.021%) accumulates primarily in the bone. Additionally, ²³⁸U is more bioavailable than ²³²Th. Post 48 h acute ingestion demonstrates noticeable histopathological and hematological alterations, implying that intake of ²³⁸U in co-contaminated soil can lead to erythrocytes and proximal tubules damage, whereas, ²³²Th intake can harm erythrocytes. Our study provides new directions for future research into the health implications of acute oral exposures to ²³⁸U and ²³²Th in co-contaminated soils. The findings offer significant insight into the utilization of in vivo SD rat testing to estimate ²³⁸U and ²³²Th bioavailability and toxicity in exposure assessment.

• Asia Marketing Journal
• /
• v.10 no.4
• /
• pp.35-64
• /
• 2009

In an effort to increase our understanding of green buying behavior, the present study proposes and tests a comprehensive model of how values influence attitudes toward the environment and preferences for green products in a cross-cultural setting. Data were collected from a survey with consumers in two cultures, diametrically different on values salient to environmental consumerism, the U.S. and Korea. As a result of model testing both at the national and multi-group levels, a refined, final model is presented. While the core human values were found to relate to environmental attitudes and green buying behavior, the patterns of the relationships among the variables emerged to differ between the two cultures, highlighting the importance of cross-cultural investigations in this area. Results suggest that biospheric values significantly influence environmental attitudes and green consumption in both countries. However, the effects of egoism were significant among American respondents whereas altruism appeared to have a significant influence on attitude and behavior in the Korean sample. Findings of this study should aid international marketers in their understanding of what drives consumers' green buying behavior in different cultural settings.

• Geomechanics and Engineering
• /
• v.35 no.5
• /
• pp.539-554
• /
• 2023

This article is dedicated to the pursuit of establishing a robust empirical relationship that allows for the estimation of in-situ modulus of deformations (E_m and G_m) within sedimentary rock slope masses through the utilization of Q_slope values. To achieve this significant objective, an expansive and thorough methodology is employed, encompassing a comprehensive field survey, meticulous sample collection, and rigorous laboratory testing. The study sources a total of 26 specimens from five distinct locations within the South Pars (known as Assalouyeh) region, ensuring a representative dataset for robust correlations. The results of this extensive analysis reveal compelling empirical connections between E_m, geomechanical characteristics of the rock mass, and the calculated Q_slope values. Specifically, these relationships are expressed as follows: E_m = 2.859 Q_slope + 4.628 (R² = 0.554), and G_m = 1.856 Q_slope + 3.008 (R² = 0.524). Moreover, the study unravels intriguing insights into the interplay between in-situ deformation moduli and the widely utilized Rock Mass Rating (RMR) computations, leading to the formulation of equations that facilitate predictions: RMR = 18.12 E_m0.460 (R² = 0.798) and RMR = 22.09 G_m0.460 (R² = 0.766). Beyond these correlations, the study delves into the intricate relationship between RMR and Rock Quality Designation (RQD) with Qslope values. The findings elucidate the following relationships: RMR = 34.05e^0.33Qslope (R² = 0.712) and RQD = 31.42e^0.549Qslope (R² = 0.902). Furthermore, leveraging the insights garnered from this comprehensive analysis, the study offers an empirically derived support system tailored to the distinct characteristics of discontinuous rock slopes, grounded firmly within the framework of the Q_slope methodology. This holistic approach contributes significantly to advancing the understanding of sedimentary rock slope stability and provides valuable tools for informed engineering decisions.

• Journal of Animal Science and Technology
• /
• v.65 no.6
• /
• pp.1180-1193
• /
• 2023

Most carcass and meat quality traits are moderate to highly heritable, indicating that they can be improved through selection. Genetic evaluation for these types of traits is performed using performance data obtained from commercial and progeny testing evaluation. The performance data from commercial farms are available in large volume, however, some drawbacks have been observed. The drawback of the commercial data is mainly due to sorting of animals based on live weight prior to slaughter, and this could lead to bias in the genetic evaluation of later measured traits such as carcass traits. The current study has two components to address the drawback of the commercial data. The first component of the study aimed to estimate genetic parameters for carcass and meat quality traits in Korean Hanwoo cattle using a large sample size of industry-based carcass performance records (n = 469,002). The second component of the study aimed to describe the impact of sorting animals into different contemporary groups based on an early measured trait and then examine the effect on the genetic evaluation of subsequently measured traits. To demonstrate our objectives, we used real performance data to estimate genetic parameters and simulated data was used to assess the bias in genetic evaluation. The results of our first study showed that commercial data obtained from slaughterhouses is a potential source of carcass performance data and useful for genetic evaluation of carcass traits to improve beef cattle performance. However, we observed some harvesting effect which leads to bias in genetic evaluation of carcass traits. This is mainly due to the selection of animal based on their body weight before arrival to slaughterhouse. Overall, the non-random allocation of animals into a contemporary group leads to a biased estimated breeding value in genetic evaluation, the severity of which increases when the evaluation traits are highly correlated.

• Korean Journal of Culture and Social Issue
• /
• v.30 no.1
• /
• pp.81-100
• /
• 2024

This study validated and investigated the psychological properties of the Korean version of Everyday Ageism Scale to measure subtle ageism in day-to day lives. A total of 498 adults aged 60 and above participated in this study, which involved measuring the everyday ageism scale, experiences of elderly discrimination, self-perception of aging scale, depression (SCL-90R), and satisfaction with life scale. The sample was randomly divided into two groups.Tthe first group(n=198) used for exploratory factor analysis and reliability analysis, and the second group(n=300) was used for confirmatory factor analysis and validity testing. As a result, if was confirmed that K-EAS consist of 10 items and 3 dimensions (i.e., exposure to ageist messages, ageism in interpersonal interactions, and internalized ageism), consistent with the original scale. K-EAS demonstrated good internal consistency, convergent validity, discriminant validity, and incremental validity. In specific, ageism in interpersonal interactions and internalized ageism were correlated with experiences of elderly discrimination, negative self-perceptions of aging, and depression. However, ageism in interpersonal interactions and internalized ageism were negatively correlated with positive self-perceptions of aging and satisfaction with life. Also, the K-EAS provided additional explanation of depression even when excluding the effect of experiences of elderly discrimination. The result confirme that K-EAS is reliable and valid. The implication and limitations of this study, as well as suggestions for the use of K-EAS and future research, were discussed.

• Journal of The Korean Society of Integrative Medicine
• /
• v.12 no.2
• /
• pp.47-53
• /
• 2024

Purpose : This study investigated the effects of concentric and eccentric contractions on muscle strength using an isokinetic dynamometer (ID) in college students in their 20s. It aimed to understand the impact of differences between the dominant and non-dominant sides on strength asymmetry and to elucidate the clinical implications of these differences to establish an appropriate posture and environment for patients. Methods : The experiment was conducted with 30 healthy adult participants. Prior to the experiment, participants underwent a warm-up targeting the shoulders, and efforts were made to eliminate factors that could potentially influence the measurement results. Subsequently, the maximum safe range of motion of shoulder joint abduction, extension, and flexion was measured using an isokinetic muscle function testing device. Muscle strength was assessed using concentric and eccentric contractions alternating between the dominant and non-dominant sides, and paired sample t-tests were used for the analysis. Results : There was no significant difference between bilateral peak torques for eccentric contraction in shoulder joint abduction, extension, and flexion (p>0.05). There was also no significant difference between bilateral peak torques for concentric contraction in shoulder joint abduction, extension and flexion (p>0.05). Conclusion : This study found no statistically significant difference in muscle strength between the dominant and non-dominant sides during concentric and eccentric contractions. However, previous studies have shown significant differences between the dominant and non-dominant sides during eccentric and concentric contractions during internal shoulder rotation in the general population, as well as significant differences in the upper trapezius muscle. Therefore, further research is needed to support the application of different intensities for bilateral muscle strengthening exercises in clinical practice.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.3
• /
• pp.137-146
• /
• 2024

The purpose of this study was to determine the effects of 12 weeks of WB-EMS training on body composition and heart rate variability based on BMI Level in Women. The subjects of the study were premenopausal women, and they were classified into the BMI-N(n=15) group for BMI<25, the BMI-1(n=16) group for BMI=25~29.9, and the BMI-2(n=9) group for BMI>30. And then, WB-EMS training was performed of 3 times a week for 12 weeks. Body composition and HRV were measured before and after the participation in exercise, which were subjected to a repeated-measures two-way ANOVA. In the case of a significant interaction between time and group, paired sample t-tests were conducted for a post-hoc analysis within each subject group. Tukey's method was used for post-hoc testing of differences between groups, and the significance level was set at 0.5. The results were as follows; First, The effect of WB-EMS training was found in all variables of body composition. In particular, Weight, BMI, FFM, and FM decreased the most in the BMI-2 group, followed by the BMI-1 and BMI-N groups. %BF and VF decreased the most in the BMI-2 group. Second, There was a difference in BPM in all groups, and the BMI-2 group showed the greatest decrease. There were differences in SDNN and RMSSD for each group, and there was no difference according to obesity level. There was no difference in LF, HF, and LF/HF ratio. In conclusion, it was confirmed that WB-EMS training can be an exercise therapy that has a positive effect on the body composition change and cardiac circulatory system in women with a high level of obesity.

• Korean Journal of Clinical Laboratory Science
• /
• v.56 no.1
• /
• pp.59-65
• /
• 2024

This study examined the fecal samples of striped field mice (Apodemus agrarius coreae) captured in Jeju Special Self-Governing Province. Fecal samples, including the colon and other intestinal organs, were collected and subjected to aerobic culture to investigate the distribution of intestinal microorganisms. Gram staining of the aerobic cultured bacterial colonies from 36 fecal samples revealed the predominant presence of gram-negative bacilli in all samples. Among the 36 samples, gram-negative bacilli were identified in 36 strains (100%), gram-positive cocci in 21 strains (58.3%), and gram-positive bacilli in 15 strains (41.7%), while no gram-negative cocci were observed. The gram-negative bacilli cultured from the 36 samples were identified using the Vitek 2 system, and all were determined to be Escherichia coli (E. coli) strains. In addition, one sample was concurrently identified with E. coli and Enterobacter cloacae strains. The antimicrobial susceptibility testing for the identified E. coli strains did not include all antibiotics, but one strain exhibited intermediate resistance to cefoxitin. No pathogenic bacteria were present in the fecal samples of the scrub typhus-infected rodents, which are vectors for chigger-borne diseases affecting humans and animals.