• Journal of Fashion Business
• /
• v.16 no.4
• /
• pp.100-106
• /
• 2012

This research was carried out to find the mordant effect of Chestnut's inner skin on the cow leather dyed by Turmeric powder. The best proper mordanting conditions were examined by changing mordant method, concentration, temperature, bath ratio, time, and repetition. Also dyeability and surface color changes were evaluated by various mordanting methods. The optimum mordanting conditions of chestnut's inner skin extract on the cow leather were pre mordant, 80%, $50^{\circ}C$, 50:1, 40minutes, 4 repetition. The K/S values as a mordant were higher in pre mordant than post mordanting condition. Although the ${\Delta}E$ was slightly higher in post mordant than pre mordant, it was too small to find any means. The surface colors of all dyed cow leathers were yellow. Among light, dry cleaning, and abrasion fastnesses, only light fastness was increased one degree, others were same degrees.

• Journal of Fashion Business
• /
• v.8 no.6
• /
• pp.137-145
• /
• 2004

According to the experimental results, it has been reported by several researchers that the air-permeability values of the fabrics mostly decreased by the mordanting during the dyeing procedure. The exact quantitative information, however, has not been presented so far. In this study, the change of the fabric air-permeability was investigated quantitatively. At the same time, the change of the fabric air-permeability according to the dyeing procedure. In order to investigate the possibility of the detachment of the metal ions on the fiber or fabric surface, the change of the air-permeability was investigated after several rinsing of the mordanted fabrics. By comparing the color differences of the cochineal dyed fabrics which were subjected to rinsing procedure after mordanting, the effect of the rinsing of the mordanted fabrics on the dyeing of fabrics was investigated. At the range of mordant concentration, 2% Cu, 2% Sn, 2% Fe, 2% Cr, 5% Al, the metal ions are not excessively absorbed on the fiber surface. Also, any remarkable detachment of the metal ions does not accompany after the mordanting with the subsequent rinsing procedure.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.3_4
• /
• pp.444-451
• /
• 2004

This study was carried out to investigate the chemical and dyeing properties of Petasites japonicus leaf extract under the various extracting and dyeing conditions such as temperature, time, the ratio of water and pH, repetition of dyeing in silk and cotton fabrics with Petasites japonicus leaf. The results were as follows: 1. It was found that λ$_{\max}$ of color solution extracted by Petasites japonicus leaf has two peaks at 290nm and 323nm. 2. The optimum extracting conditions were studied at 10$0^{\circ}C$, 40min., pH 7 and 1 : 20(the ratio of water and Petasites japonicus leaf), the optimum dyeing temperature, dyeing time, dyeing pH and repetition of dyeing were 10$0^{\circ}C$, 60min., pH 7, repetitions of three times, respectively. 3. Silk and cotton fabrics dyed with Petasites japonicus leaf extract were colored yellowish orange. The colory Petasites japonicus leaf extract in silk and cotton fabrics were deeped by same-mordanting with aluminum potassium sufate and cupric sulfate. 4. Washing fastness of silk fabrics was 4∼5 grade, but cotton fabrics was 3∼4 grade, so washing fastness of silk fabrics washed with neutral detergent was excellent.

• Textile Coloration and Finishing
• /
• v.27 no.3
• /
• pp.202-209
• /
• 2015

Many of the natural dyes used for natural dyeing are difficult to maintain colorfastness due to their complex structure and specific properties. Therefore, there is a need for developing of color sustainable ability for use as an advanced coloring agent for fabrics, which would eco benign or not. In this study, the natural dye extracted from the waste of grape fruits was used to dye cotton fabric. Thus, the present study aims at extraction of color from grape seeds, skin, and stem through fermentation and then employing the same in dyeing and mordanting of cotton. Dyeing experiments were done under different conditions of fermentation and protein type mordants which were treated before and after dyeing. Experimental fabrics were used with cotton after scouring. Color value of dyed fabrics and color fastness of cotton dyed fabrics to washing and light were measured. The fastness of dyed experimental fabrics was increased by mordanting of protein fermentation and the color of dyed cotton was light red purple. The color of dyed fabric found with the optimum mordant treatment when treated with pre milk-mordant at $40^{\circ}C$ for 30min and 3% grape seed extract. On the whole, reddish tone very slightly increased with the milk pre-mordant. The color fastness of dyed cotton fabrics to light and washing was increased after fermentation.

• Journal of Fashion Business
• /
• v.13 no.2
• /
• pp.145-153
• /
• 2009

By introducing chitosan treatment prior to dyeing, examination was given to the effect of chitosan coated on the surface of fabrics on the color change of dyed fabric based on th e change of ${\Delta}E$, a*, and b* values. At the same time, the dyeing mechanism of Caesalpinia sappan dyestuff was predicted by the investigation of the change of air-permeability ac cording to the chitosan treatment. The change of elution was investigated by the examination of the elution of metallic ions employed as mordants after soaking dyed fabrics in the solution of alkaline perspiration ba sed upon the fact that chitosan carries excellent absorption ability toward metallic ions.

• Fashion & Textile Research Journal
• /
• v.2 no.3
• /
• pp.215-219
• /
• 2000

Dyeability and antimicrobial activity of Saururus chinensis on to silk and cotton fabrics has been studied. The dyestuff was extracted with distilled water. Silk fabric showed higher K/S value than cotton fabric at the same condition. And with the simmordanting by Fe, Cu gave good improvements of the K/S values. Surface color of dyed fabrics was various according to the used mordants: Cr mordanted fabric was to be cleared, Fe mordanted fabric was the greatest color difference. The fastness was significantly improved in mordanting. The Fe, Cu mordanted silk fabrics was the greatest antimicrobial activity.

• Textile Coloration and Finishing
• /
• v.20 no.3
• /
• pp.8-17
• /
• 2008

For the purpose of standardization and practicability of natural dyeing, the mordanting and dyeing properties of turmeric was studied. In this study, the colorants of turmeric were extracted with boiling water. Chitosan-crosslinked cotton fabrics was dyed with aqueous extract of turmeric and their dyeabilities on the fabrics were studied. Additionally the fastness to washing and light were also investigated. Cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye(turmeric) by the chemical linking of chitosan to the cellulose structure. The chitosan finishing and durable press finishing of the cotton fabrics occurred simultaneously in the mercerization bath. The dyeability(K/S), which was obtained by CCM observation, remarkably became increased when the crosslinked chitosan concentration was higher. Dyeability of turmeric was improved on chitosan-crosslinked cotton fabric rather than only cotton fabric, while the saturated dyeing time was 20minutes at $60^{\circ}C$. The hue value indicated greenish yellow with increasing the crosslinked chitosan concentration. And the color fastness to washing and light was almost the same.

• Journal of Fashion Business
• /
• v.9 no.1
• /
• pp.113-119
• /
• 2005

In our previous study, the color development characteristics in the dyeing of silk fibers and PET fibers using Rhusjara ica and related properties were meticulously reviewed. At the same time, the fabric specimens were endowed with chitosan treatment prior to the dyeing procedure in order to investigate the effect of chitosan on the dyeing behavior. The analysis of the colors only, however, would not give us complete elucidation of the effect of fiber characteristics and the mordanting characteristics. In this study, the effect of chitosan and metal mordant treatment in dyeing of silk and PET fabrics using Rhusjara ica has been studied. The change of air-permeability, wash fastness, and light fastness were also investigated.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.3 no.2
• /
• pp.35-50
• /
• 2001

The object of this study is to improve the adsorption of dye for gromwell. Dye was from gromwell first soaked in methylol and added the distilled water, using same amount of methylol. The fabrics used for the experiments were cotton, silk and acrylics(KS0905). These were used untreated and pretreated with chitosan, premordanted with Cu, Al and Fe. Dyeing conditions were controlled. 1. Deep color effect was shown silk. 2. Chitosan treated cotton and acrylics showed deep color effect and huge color difference before and after the experiment. 3. In chitosan treated acrylics, deep color effect were shown. It proved the good adsorption of gromwel under metal mordanting. 4. Cu showed high adsorption of gromwell and deep color effect. 5. Chitosan treated acrylics can be substitute for wool.

• Fashion & Textile Research Journal
• /
• v.10 no.3
• /
• pp.377-384
• /
• 2008

For the purpose of standardization and practicability of natural dyeing, the mordanting and dyeing properties of gallnut was studied. In this study, the colorants of gallnut were extracted with boiling water. Chitosan crosslinked cotton fabrics were been dyed with aqueous extract of gallnut and their dyeabilities on the fabrics were studied. Additionally, the fastness to washing and light were also investigated. Cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye(gallnut) by the chemical linking of chitosan to the cellulose structure. The chitosan finishing and durable press finishing of the cotton fabrics carried out simultaneously in the mercerization bath. The dyeability(K/S), which was obtained by CCM observation, remarkably increased as the concentration of chitosan was high. Dye ability of gallnut showed higher toward chitosan treated cotton than controlled cotton fabric under condition at $60^{\circ}C$, for 20 min. The hue value indicated reddish yellow with increasing the crosslinked chitosan concentration. And the color fastness to washing and light was the almost the same.