• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1B
• /
• pp.1-7
• /
• 2008

In group location management, when a transportation system(TS) with multiple mobile subscribers(MSs) changes location area(LA), location management is performed by group location registration by TS, instead of individual location registrations by MSs. In previous works, although it is assumed that LA in group location management is the same as that in individual location management, it is not appropriate to assume the same sized LAs since MSs in a TS have different characteristics from MSs which are not in a TS from the aspect of the speed and aggregate call arrival rates. Thus, in this paper, we propose an efficient location management scheme based on individual and group location managements with different sized LAs, and the performance of the proposed scheme is analyzed from the aspect of signaling cost at the wireless interface. Results reveal that the proposed scheme outperforms the conventional scheme by selecting an appropriate sized LA for group location management.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.369-372
• /
• 2009

When measuring the luminous flux of a light source at the integrating sphere photometer, it can know the luminous flux to compare the standard lamp with the specimen lamp at the same location. But in case of PLS(plasma lighting system, microwave discharged lamp), that two lamps are cannot be the same location. If the reference illuminant and specimen lamp are cannot measure identical location, we should measure the variation of the luminous flux. For the outcome we can turn out a correction factor to revise and reflect it. But the better way is calibrate the specimen lamp locate the identical location of reference illuminant measured. In this thesis, we've test to find the correction factor for consider that change the measuring location. And it turns out the correction factor. From this, it presents the result to make a select for the reference illuminant which is against the illuminant type for newly produce.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.759-762
• /
• 2015

Many applications require users to log-in, some applications can allow users to use the same account is active on multiple devices at the same time. On location-based application that serves to record the movement of the position, account is active on multiple devices could not be permitted because it causes a different location data from multiple devices, so the location of the users become ambiguous. This paper describes a simple protocol to prevent users from using their accounts on multiple devices at the same time. This Protocol will turn off one account on a device when the account log-in on new devices.

• The Journal of Information Systems
• /
• v.14 no.3
• /
• pp.17-22
• /
• 2005

Location management is very important in location-based services to provide services to the mobile users like banking, city guides and many more. Ubiquitous and mobile devices are the source of data in location management and its significant operations are update and search method. Some studies to improve these were presented by using optimal sequential paging, location area scheme and hierarchical database scheme. In addition, not all location services have the same access methods on data and it lead to difficulties of providing services. A proposed location management of multi-agent architecture is presented in this study. It shows the coordination of the agents on the distributed database of location-based services. The proposal focuses on the location management of the mobile object presented in a hierarchical search and update. Also, it uses a nearest neighbor technique for efficient search method of mobile objects.

• Korean Journal of Acupuncture
• /
• v.35 no.4
• /
• pp.203-209
• /
• 2018

Objectives : The GB18 belongs to one of the 92 controversial points in the development of WHO standard of acupuncture point location. The number of Chon measurement of GB18 is described differently in the A-B Classic of Acupuncture and Moxibustion (ChimGuGakEulKyung; AB Classic) and the Complete Compendium of Acupuncture and Moxibustion(ChimGuDaeSeong; Complete Compendium). The aim of the study is to review the point location of GB18 and compare the relation of the location of BL7. In addition, I would like to propose new locating method of GB18. Methods : In order to review I examined the expressions of the location of GB18 and the mapping location on the acupuncture chart in the landmark classic acupuncture literatures. Results : In the most literatures, the location of GB18 was described by the distance from the GB17. The distance was 1.5 chon with one exception of 1 chon. The intervals from GB15 to GB18 was 1 chon or 1.5 chon. Although the distance from the anterior hairline is the same as 4 chon, mapping points of GB18 and BL7 on the acupuncture chart were different. Conclusions : Consequently, in the AB Classic, meaning of the location is the actual distance of scalp surface. In the Complete Compendium, however, meaning of the location is the hypothetical distance in the imaginary scalp surface. Therefore, it is safe to find the GB18 on the same level with GV20 on the connecting line of bilateral auricular apexes. The relation of GB18 and BL7 should be reconsidered.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1754-1763
• /
• 2017

This paper analyses the characteristics of incomplete-journey double-circuit transmission lines on the same tower formed by single-circuit lines and double-circuit lines, and then presents a fault location algorithm based on identification of fault branch. With the relationship between the three-phase system and the double-circuit line system, a phase-mode transformation matrix for double-circuit lines can be derived. Based on the derived matrix, the double-circuit lines with faults can be decoupled, and then the fault location for an incomplete-journey double-circuit line is achieved by using modal components in the mode domain. The algorithm is divided into two steps. Firstly, the fault branch is identified by comparing the relationships of voltage amplitudes at the bonding point. Then the fault location, on the basis of the identification result, is calculated by using a two-terminal method, and only the fault distance of the actual fault branch can be obtained. There is no limit on synchronization of each terminal sampling data. The results of ATP-EMTP simulation show that the proposed algorithm can be applied within the entire line and can accurately locate faults in different fault types, fault resistances, and fault distances.

• Korean Journal of Cognitive Science
• /
• v.16 no.3
• /
• pp.155-174
• /
• 2005

Oh and Kim (2004) and Woodman and Lurk (2004) demonstrated that spatial working memory (SWM) load Interfered concurrent visual search and that search process also impaired the maintenance of spatial information implying that visual search and SWM task both require access to the same limited-capacity mechanism. Two obvious possibilities have been suggested about what this shared limited-capacity mechanism is: common demand for attention to the locations where the items f9r the two tasks were presented (spatial attention load hypothesis), and common use of working memory to maintain a record of locations have been processed(SWM load hypothesis). To test these two hypothetical explanations, Experiment 1 replicated the mutual interference between visual search and SWM task in spite of difference of procedure with preceding researches; possible areas where the items for two tasks were presented were not separated. In Experiment 2, we presented the items for visual search either in the same quadrants where the items for SWM task had appeared (same-location rendition) or in the different quadrants (different-location condition). As a result, search efficiency was more impaired in the different-location condition than in the same-location condition. The memory accuracy was worse in the different-location rendition than in the same-location rendition. Overall results of study indicate that the mutual interference between SWM and visual search might be related to the overload of spatial attention, but not to that of SWM.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.760-766
• /
• 2008

This paper proposes an efficient location technique to find an indoor location under the IEEE 802.11 wireless local area networks. The proposed method is based on the range measurements obtained from a simple radio frequency propagation model. Thus, unlike the radio frequency fingerprint correlation method, it does not suffer from the computational burden during the real-time location service period and can quickly reply the location requests of many users at the same time. To increase the location accuracy in spite of the frequent non-line-of-sight error occurrences, the proposed method calibrates the distortion of the non-line-of-sight error by a simple measurement surveying procedure that does not require the surveyor's manual interaction. Experimental results show the capability of the proposed method.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.53-56
• /
• 2006

WiBro service provider have made an effort to provide the subscriber's location and have deployed LBS system using cell-ID method. Cell-ID method has a location error problem if repeater is used on the other cell places at the same time. We introduce and analysis LMU(Location Measurement Unit) on the repeater fer location detection of subscriber which is serviced via the repeater. In this paper we propose the method using LMU on the repeater to avoid these location errors and to provide more exact location to the subscriber. we can conclude that the location error can be more exact at the building which uses repeater. It represents in which level the subscriber is serviced at the building.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.11
• /
• pp.21-28
• /
• 1993

Decoding algorithm of noncyclic Reed-Solomon codes consists of four steps which are to compute syndromes, to find error-location polynomial, to decide error-location, and to solve error-values. There is a decoding method by which the computation of both error-location polynomial and error-evaluator polynimial can be avoided in conventional decoding methods using Euclid algorithm. The disadvantage of this method is that the same amount of computation is needed that is equivalent to solve the avoided polynomial. This paper considers the division method on polynomial on GF(2$^{m}$) systematically. And proposes a novel method to find error correcting polynomial by simple mathematical expression without the same amount of computation to find the two avoided polynomial. Especially. proposes the method which the amount of computation to find F (x) from the division M(x) by x, (x-1),....(x--${\alpha}^{n-2}$) respectively can be avoided. By applying the simple expression to decoding procedure on RS codes, propses a new decoding algorithm, and to show the validity of presented method, computer simulation is performed.