• 전산구조공학
• /
• 제25권4호
• /
• pp.21-27
• /
• 2012

• 국방과기술
• /
• 7호통권245호
• /
• pp.66-73
• /
• 1999

세계적인 발전 추세와 주요 개발국의 발전방향을 분석해 볼 때 휴대용 SAM의 연구 개발은 유도탄 순기비용을 고려하고 군 작전개념 및 요구 사항에 부합하는 국내 독자기본형(Basic Model)을 개발한 후 체계의 질적 경쟁력 강화를 위하여 $P^3I$(Pre-Planned Product Improvement:사전계획 성능개량 방법)를 통한 체계 계열화 및 단계적 성능 개선을 추진하여 사용자의 다양한 요구 조건을 만족시킬 수 있는 방안을 강구해야 할 것이다

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 가을 학술발표회 논문집
• /
• pp.140-154
• /
• 1992

The objective of the research stated here was aimed at providing the information needed to establish the Korean Seismic Design Code Recommendations and Guides for precast concrete (P.C) large panel apartment buildings. This was accomplished by investigation and analysis of the response of P.C large panel structures subjected to shaking table excitation simulating earthquake ground motion. one of the test specimens used was 1/3-scaled 3-story box P.C model provided by Sam-Hwan Camus Corporation. The 4m $\times$4m shaking table was used to simulate the earthquake ground motion. the employed input accelerogram was the one recorded as Taft N21E component and the peak ground acceleration(PGA) was scaled depending on the desired level of seismic severity and the time according to dynamic similitude rule. Based on results obtained from shaking table test of this P.C model, the following conclusions were drawn . (1) As far as test specimen is concerned, the seismic safety factors turns out to be 7~8. (2)P.C model has damping ratio of about8% which is twice larger than in-situ R.C. structure. And (3)this model has global displacement ductility ratio of 2~3 through the energy dissipation by opening and sliding of joints.

• 스마트미디어저널
• /
• 제13권2호
• /
• pp.52-61
• /
• 2024

조선소에서는 사외 적치장의 관리를 위해 일정 주기로 Unmanned Aerial Vehicle (UAV)을 이용해 항공영상을 획득하고, 이를 사람이 판독하여 적치장 현황을 파악한다. 이러한 방법은 넓은 면적의 사외 적치장 현황을 파악하는 데 상당한 시간과 인력을 요구한다. 본 논문에서는 이러한 문제점을 해결하고 정확한 사외 적치장 현황을 파악하기 위해 사전 학습된 의미론적 분할 기반 모델(Foundation Model)을 활용한 자동 관리 기술을 제안한다. 또한, 조선소 사외 적치장의 경우 관련 부품이나 장비를 포함한 공개 데이터셋이 충분하지 않기 때문에, 의미론적 분할 기반 모델에 필요한 객체 프롬프트(Prompt)를 생성하기 위한 소규모 사외 적치장 객체 데이터셋을 직접 구축하였다. 이를 이용해 객체 검출기를 소규모 데이터셋에 추가 학습하여 초기 객체 후보를 추출하고, 의미론적 분할 기반 모델인 Segment Anything Model (SAM)의 프롬프트로 활용해 정확한 의미론적 분할 결과를 얻는다. 더 나아가, 지속적인 적치장 데이터셋 수집을 위해 SAM을 활용한 훈련 데이터 생성 파이프라인을 제안한다. 본 연구에서 제안한 방법은 기존의 의미론적 분할 방법과 비교하여 평균적 4.00%p, SegFormer에 비해 5.08%p 높은 성능을 달성하였다.

• 대한화학회지
• /
• 제64권6호
• /
• pp.345-349
• /
• 2020

금 표면 위에서 알칸싸이올 분자가 자기조립을 통해 단분자층을 만들 때 싸이올기가 화학 흡착을 못하고 알킬기가 물리 흡착을 하는 결함이 생길 수 있다. 이러한 결함은 열적 어닐링 과정으로 제거할 수 있음이 알려져 있다. 우리는 알칸싸이올 분자에 대한 이징 모형을 제시하고 단분자층 어닐링 과정의 몬테카를로 시뮬레이션에 적용하였다. 새로운 이징 모형은 선행 분자동역학 시뮬레이션에서 나타난 어닐링을 통한 단분자층의 결함 제거를 성공적으로 재현할 수 있었다.

• 동의신경정신과학회지
• /
• 제19권3호
• /
• pp.101-115
• /
• 2008

Objective: The purpose of this study was to investigate the protective effects of Sam-Jeong-Hwan(SJH) on the animal model of depression induced immobilization stress. Method: The subject were divided into 4 groups(l. normal 2. saline solution administered during immobilization stress treatment 3. SJH of 100mg/kg administered 4. BKJ of 400mg/kg administered). Immobilization stress was treated for 1 hours on day. During 2 days of immobilization stress treatment, they were executed forced swimming test, passive avoidance test, elevated plus maze test. Corticosterone and ACTH in blood were measured. Results: In forced swimming test, SJH of 400mg/kg group showed decreased immobilization. In passive avoidance test, SJH of 400mg/kg group showed increased learning execution. In EPM test, SJH of 400mg/kg group showed decreased anxiety. In locomotor activity test, SJH groups showed significantly increased locomotor activity. Stress group showed significantly increase in serum level of corticosterone, SJH of 400mg/kg group showed decreased serum level of corticosterone. Stress group showed significantly increase in serum level of ACTH, SJH of 400mg/kg group showed decreased serum level of ACTH. Conclusion: These results suggest that Sam-Jeong-Hwan(SJH) is effective in the treatment of depression.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.484-497
• /
• 2021

This paper proposes an extended time uncertainty analysis approach in Level 2 human reliability analysis (HRA) considering severe accident management (SAM) strategies. The method is a time-based model that classifies two time distribution functions-time required and time available-to calculate human failure probabilities from delayed action when implementing SAM strategies. The time required function can be obtained by the combination of four time factors: 1) time for diagnosis and decision by the technical support center (TSC) for a given strategy, 2) time for strategy implementation mainly by the local emergency response organization (ERO), 3) time to verify the effectiveness of the strategy and 4) time for portable equipment transport and installation. This function can vary depending on the given scenario and includes a summation of lognormal distributions and a choice regarding shifting the distribution. The time available function can be obtained via thermal-hydraulic code simulation (MAAP 5.03). The proposed approach was applied to assess SAM strategies that use portable equipment and safety depressurization system valves in a total loss of component cooling water event that could cause reactor vessel failure. The results from the proposed method are more realistic (i.e., not conservative) than other existing methods in evaluating SAM strategies involving the use of portable equipment.

• 비파괴검사학회지
• /
• 제29권6호
• /
• pp.534-549
• /
• 2009

As the thin film technology has emerged in various fields, adhesion of the film interface becomes an important issue in terms of the longevity and durability of thin film devices. Diverse nondestructive methods utilizing acoustic techniques have been developed to assess the interfacial integrity. As an effective technique based on the ultrasonic wave focusing and the surface acoustic wave(SAW) generation, scanning acoustic microscopy(SAM) has been investigated for adhesion evaluation. Visualization of film microstructures and quantification of adhesion weakness levels by SAW dispersion are the recent achievements of SAM. To overcome the limitations in the theoretical dispersion model only suitable for perfectly elastic and isotropic materials, a new model has been more recently developed in consideration of film anisotropy and viscoelasticity and applied to the adhesion evaluation of polymeric films fabricated on semiconductive wafers.

• 한국산업융합학회 논문집
• /
• 제25권1호
• /
• pp.71-78
• /
• 2022

With the advent of cutting-edge technology, renewable energy is significantly considered as alternative resources to supply electric power. However, many barriers such as energy intermittency, high initial installation cost, and low-efficiency generation challenged building new infrastructure with clean energy. Efforts reducing greenhouse gas emissions and reliance on fossil fuels resulted in the decentralization of power generation like distributed energy resource (DER). This paper is to introduce and evaluate the feasibility of building-integrated photovoltaics (BIPV) in a high-rise building in Ulsan. To optimize BIPV, a variety of methods to minimize efficiency decrease and maximize electric power generation after installing BIPV on the building's facade are suggested. The variables causing power losses are analyzed. By utilizing System Advisor Model (SAM), actual power generated from solar panels is measured by Thin-film PV, Mono-crystalline PV, and Poly-crystalline PV.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2012년 춘계학술대회
• /
• pp.547-559
• /
• 2012

This thesis introduced a model of diagnosing a company's quality management, and a process of achieving quality innovation based on the model. As for study methods, books and theses related to quality and process innovation were collected for investigation, a survey on internal employees to investigate major issues of quality and standard consciousness was conducted, and 5DP was discussed for balanced process analysis.