• 한국분말재료학회지
• /
• 제20권3호
• /
• pp.203-209
• /
• 2013

In this study, STS 316L powders with 3 wt.% Cu and 1 wt.% Sn known as corrosion-resistance reinforcement elements, are prepared to make different kinds of specimens, in which, 3 wt.% Cu and 1 wt.% Sn are added in different forms by mixing, alloying and fully alloying. After sintering in the same condition, the corrosion resistance, wear resistance and their mechanical properties of specimens are tested respectively. According to the comparison, STS 316L specimen sintered at $1270^{\circ}C$ showed the most excellent mechanical property: HRB 78 (hardness), 1130.7 MPa (RCS), 26.6% (Fraction Wear), It was similar with the specimen made of STS316L and fully alloyed Cu and Sn powders, meanwhile, the latter one appears the best corrosion resistance, 75hrs-salt immersion test results. In addition, the specimens with Cu and Sn powders additive showed relatively worse wear resistance in compared with STS316L specimen.

• 한국표면공학회지
• /
• 제32권1호
• /
• pp.67-77
• /
• 1999

The Ni base superalloy Mar-M247 substrate was aluminized or aluminized after boronizing by the pack cementation under Ar atmosphere. The hot corrosion resistance and after-heat-treatment effect of aluminized specimens were studied by the cyclic hot corrosion test in $Na_2SO_4$-NaCl molten salt. XRD analysis showed that the $Ni_2Al_3$ phase was formed between the coated layer and substrate below 1273K but the NiAl phase above 1273K. The peak of the NiAl phase was developed after heat treatment. Corrosion test showed that corrosion resistance of the specimen with the NiAl phase was better than that with the $Ni_2Al_3$ phase. Corrosion resistance could be improved by heat treatment to form ductile NiAl phase, where cracks were not formed by thermal shock on coating layer. Moreover, it appeared that heat treatment played a role to improve corrosion resistance of Al diffusion coating above 1273K. The existence of boron in the Al diffusion coating layer obstructed outwared diffusion of Cr from the substrate, and it influenced on corrosion resistance of the coating layer by weakening adherence of the oxide scale.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권5호
• /
• pp.112-118
• /
• 2022

이 연구는 원전 안전성 관련 구조물의 콘크리트 배합설계를 이용하여 확산특성을 평가하였다. 원전안전성관련 콘크리트 구조물 중 해수에 침지되거나 간만대에 위치하는 취배수구조물의 배합을 선정하여 압축강도, 전기전도도에 의한 염소이온 침투저항성 평가, 염수침지를 통한 확산특성을 분석하였다. 원전 콘크리트 구조물의 설계기준강도인 91일까지 재령에 따라 1, 7, 14, 28, 56, 91일에 압축강도를 측정했으며, 재령 28, 91일에 염소이온 침투저항성 평가를 실시했다. 재령 28일 콘크리트 시험체를 28일간 염수에 침지한 뒤 깊이별 시료를 채취하여 염화물량을 분석함으로써 확산계수를 도출하였다. 결과적으로 보통포틀랜드시멘트를 100% 사용한 콘크리트보다 플라이애시가 20% 치환된 원전 콘크리트 배합이 28일 이후 장기적인 강도증진 효과가 더 높게 나타났다. 또한 원전콘크리트 배합이 보통포틀랜드시멘트를 100% 사용한 배합보다 염소이온 침투저항성이 높고 확산계수도 더 낮게 나타나 염해에 대한 저항성이 더 높은 것으로 나타났다.

• 한국환경과학회지
• /
• 제28권11호
• /
• pp.907-915
• /
• 2019

This study aims to identify the most tolerant species under salinity stress from amongst Asteraceae and Poaceae. The seeds of six species were exposed to different concentrations of $CaCl_2$ (0, 9, 18, 45, 90 mM) and NaCl (0, 17, 34, 85, 170 mM), and germination was measured once every two days. The results indicated that percent germination of the six species of Asteraceae and Poaceae seeds were affected differently by changes in salinity concentration. Seed germination was reduced as salinity levels increase, and longer mean germination times correlated to lower percent germination and earlier germination cessation. Both Asteraceae and Poaceae seeds had the highest germination rates at 18 mM $CaCl_2$ and 34 mM NaCl, and seed germination and growth were severely reduced at salinities greater than 90 mM $CaCl_2$ and 170 mM NaCl. In the seeds of Poaceae, salt resistance was strong in the order of Miscanthus sinensis Andersson, Pennisetum alopecuroides (L.) Spreng., and Phragmites communis Trin. In the seeds of Asteraceae, salt resistance was strong in the order of Dendranthema zawadskii var. latilobum (Maxim.) Kitam, Aster yomena (Kitam.) Honda, and Dendranthema boreale (Makino) Ling ex Kitam.. Overall, the germination rate was higher in Asteraceae than in Poaceae. This study demonstrated that Dendranthema zawadskii var. latilobum (Maxim.) Kitam. is the most tolerant species and that a relationship exists between the salt tolerance of percent germination and the mean germination time in the leaves.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.527-530
• /
• 2002

In the present study, immersion test using artificial seawater was performed to evaluate the resistance of mortar specimens with or without ground granulated blast-furnace slag (SG) and fly ash (FA). Another variable was the fineness levels of SG (4,450, 6,000 and 8,000 ㎠/g). From the results of the immersion test for 270 days of exposure, the excellent resistance to seawater attack for SG mortar mixtures, especially in a high fineness levels, was confirmed. However, the reductions in compressive strength of FA mortar specimens was similar to those of OPC mortar specimens irrespective of replacement of FA.. In order to understand the deterioration mechanism due to seawater attack, X-ray diffraction (XRD) analysis were also carried out. Some reactants such as ettringite, gypsum, brucite and Friedel's salt were possibly detected through XRD technique.

• 산업기술연구
• /
• 제36권
• /
• pp.83-88
• /
• 2016

In this study, a series of experiment was carried to improve dewaterability of the sludge produced in a treatment plant, located in Hongcheon, Gangwondo, which has been treating municipal wastewater and livestock wastewater. Optimum sludge mixing ratio and the amount of sludge conditioner were determined. As sludge conditioners, alum and ferric salt were selected and tested. For the measurement of sludge dewaterability, capillary suction time(CST) and the specific resistance were measured, The specific resistance was detemined by running a series of Buchner Funnel Test. Mixing the two sludges at a 50:50 ratio with the addition of 20 mL alum gave the best results in terms of dewaterability. The moisture content decreased by 2% at this condition.

• Mycobiology
• /
• 제38권3호
• /
• pp.225-228
• /
• 2010

We studied the resistance of Cenococcum geophilum and Suillus granulatus isolates to NaCl during growth under axenic culture conditions. C. geophilum isolates displayed variations in NaCl resistance; mycelial growth of most isolates was inhibited above 200mM. All isolates of S. granulatus were tolerant to high NaCl content.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.467-472
• /
• 2000

It is known that chloride ion in concrete destroys the passive film of reinforcement inside concrete and accelerates corrosion which is the most influencing factor to durability of concrete structures. In this thesis, a chloride ion diffusion model for blast furnace slag(BFS) concrete, which has better resistance to both damage due to salt and chloride ion penetration than ordinary portland cement concrete, is proposed by modifying existing model of normal concrete. Proposed model is verified by comparing diffusion analysis results with both results by indoor chloride penetration test for specimens and field test results for actual RC bridge pier. Also, the optimum resistance condition to chloride penetration is obtained according to degrees of fineness and replacement ratios of BFS concrete. As a result, resistance to chloride ion penetration for BFS concrete is more affected by replacement ratio than degree of fineness.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.427-430
• /
• 2002

This paper presents on contamination performance of polymeric outdoor insulator with different contaminant accumulation. The ESDD (equivalent salt deposit density), tracking resistance and clean-fog test were performed to investigate the characteristics of contamination performance on polymeric outdoor insulator. Furthermore, we evaluated together with the porcelain samples for its comparison. It is found that ESDD of polymeric and porcelain insulator depends on the installation position. This surface accumulation of contaminant lead to the loss of surface hydrophobicity, expecially upper shed part of polymeric insulator. In addition, the effect of an artificial contaminant on the tracking resistance by inclined-plane method and leakage suppression ability under clean fog was surveyed. The time of tracking failure did not appear to change significantly with a much contaminant accumulation, while leakage current under clean-fog increased.

• 한국전기전자재료학회논문지
• /
• 제14권4호
• /
• pp.302-308
• /
• 2001

The polymers with various composition of 4-vinylpyridine (4-VP) with n-butyl acrylate (n-BA) and 2-hydroxypropyl methacrylate (HPMA) were synthesized as a humidity sensitive material and quaternized with 1.5-dibromopentane. Resistance versus relative humidity decreased with increase in the content of n-BA in the copolymer. The introduction of HPMA increased the resistance of the humidity sensor as well as enhanced the adherence to the alumina substrate. In the case of 4-VP/n-BA/HPMA=80/10.10, the hysteresis and temperature coefficient were $\pm$2%RH and -0.42∼0.46%RH/$\^{C}$. The average resistance at 30%RH, 60%RH and 90%RH are 3.1㏁, 155 ㏀ and 7.9 ㏀, respectively.