• Journal of Animal Science and Technology
• /
• v.64 no.2
• /
• pp.218-234
• /
• 2022

Urbanization is usually followed by changes in eating habits, with a specific trend toward the consumption of ready-to-eat products, such as processed foods. Among the latter, meat products are known contributors to high dietary sodium owing to salt addition. Salt plays an essential role in maintaining the quality of meat products in terms of acceptability and safety. However, an excessive salt intake is linked to high blood pressure and cardiovascular diseases. Hence, several studies have been competing for the discovery of salt alternatives performing in a similar way as common salt. A number of replacements have been proposed to reduce salt consumption in meat products while taking into account consumer preferences. Unfortunately, these have resulted in poorer product quality, followed by new adverse effects on health. This review addresses these recent issues by illustrating some established approaches and providing insight into further challenges in developing low-salt meat products.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.198-201
• /
• 2012

The electrolytes in thermal batteries are nonconductive solids at ambient temperature, which prevent the self-discharge and corrosion. To meet severe environmental requirements and guarantee acceptable handling yields, all the pellets in cells should have adequate strength, especially for the cathodes due to their poor binding properties among FeS2 particles. By modifying the surface microstructure of FeS2 through molten-salt heat treatment, the inter-particle binding strength is greatly increased, resulting in the enhanced pellet strength and yield. The addition of Li2O also promoted the soft salt coating coverage of hard FeS2 particles, which can be explained by the enhanced wettability of the molten salt.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.3
• /
• pp.57-62
• /
• 2016

The over-discharging phenomena in sodium-nickel chloride batteries were investigated in relation to decomposition of molten salt electrolyte and consequent metal co-deposition. From XRD analysis, the material deposited on graphite cathode current collector was revealed to be by-product of molten salt electrolyte decomposition. In particular, the result showed that the Ni-Al alloys ($Al_3Ni_2$, $Ni_3Al$ and $Al_3Ni$) were electrochemically deposited on graphite current collectors in line with over-discharging behaviors. It is assumed that the $NiCl_2$ solubility in molten salt electrolytes leads to the co-deposition of Ni-Al alloys by increasing metal deposition potential above 1.6 V (vs. $Na/Na^+$). The cell tests have revealed that the composition of molten salt electrolytes modified by various additives makes a decisive influence on the over-discharging behaviors of the cells. It was revealed that NaOCN addition to molten salt electrolytes was advantageous to suppress over-discharge reactions by modifying the characteristics of molten salt electrolytes. NaOCN addition into molten salt electrolytes seems to suppress Ni solubility by maintaining basic melts. The cell using modified molten salt electrolyte with NaOCN (Cell D) showed relatively less cell degradation compared with other cells for long cycles.

• Korean Journal of Community Nutrition
• /
• v.18 no.6
• /
• pp.555-564
• /
• 2013

The purpose of this study was to compare and analyze the assessment of salty taste and high-salt dietary behaviors of Korean university students and their Chinese counterparts. The researchers developed a taste assessment computer program focusing on preference for salty taste, and it was applied to 300 university students, including 100 Korean students, and 100 Chinese students in Daegu of South Korea, and 100 Chinese students in Shenyang of China (144 males and 156 females). The results of the taste assessment of Chinese and Korean university students are as follows. Among males, Koreans (36.0%), Chinese students in Korea (36.2%), and Chinese (40.4%) scored highest in the "a bit salty" followed by "normal." Among females, Koreans (36.0%), Chinese students in Korea (49.1%), and Chinese (28.3%) scored highest in the "normal". In terms of salt concentration in solution, among the male subjects, most Koreans favored the salt concentration of 0.31%, which is considered to be a "normal" concentration; most Chinese students in Korea favored 0.63%, which is considered to be "a bit salty", and most Chinese favored the concentration of 1.25%, which is considered to be "salty". As for the female subjects, Koreans, Chinese students studying abroad, and Chinese favored 0.31%, the "normal" level of concentration. Korean students scored higher than Chinese students in Korea and Chinese students both in males and females (p < 0.001, p < 0.01), in terms of high-salt dietary behaviors favored salty taste. This study suggests that Chinese university students need nutrition education in terms of modifying eating behaviors to reduce dietary salt intake.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.635-638
• /
• 2003

For the acute assessment on biological toxicity of wastewater, surface plasmon resonance(SPR) based cell viability detection was performed using gold surface-confined cell as a result of adhesion-modifying chemicals. Escherichia coli O157:H7 (E. coli O157:H7) was investigated after exposure to EDTA. Cells were immobilized on gold coated slide glass for SPR analysis by the method of cross-linking carboxyl group on the bacterial surface with amine group of poly-L-lysine that had been coupled to the gold surface modified by a self-assembled monolayer of 11-mercaptounde canoic acid (11-(MUA)). Reflective intensity of each flow step was changed with respect to confect of ethylenediaminetetraacetic acid (EDTA) disodium salt and phosphate-buffered saline (PBS) solution. The proposed detection technique can be used for biological toxicity test.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.355-360
• /
• 1999

Polymer cement is made by the modifying ordinary cement concrete with polymer additive. Until now polymer cement concrete is not used for the structural member, but it is growing to be considered as developing uses such as a waterproof of roof slab, the structural member for protecting corrosion, and a road pavement. The plymer cement concrete, being used for those uses, is superior to the cement concrete against the inorganic, organic acid, salt of acetic acid and organic solvents generally. In this paper, the polymer cement concrete was made by the ratio of 1:1 of sands and tailing in fine aggregate in order to solve the environmental pollution which causes the social problem by the tailing, It was measured for the compressive strength, flexural strength, and chemicals resistance was tested by dealing with 10% HCI, 20% NaOH and 10% NaCl aqueous solution.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.467-472
• /
• 2000

It is known that chloride ion in concrete destroys the passive film of reinforcement inside concrete and accelerates corrosion which is the most influencing factor to durability of concrete structures. In this thesis, a chloride ion diffusion model for blast furnace slag(BFS) concrete, which has better resistance to both damage due to salt and chloride ion penetration than ordinary portland cement concrete, is proposed by modifying existing model of normal concrete. Proposed model is verified by comparing diffusion analysis results with both results by indoor chloride penetration test for specimens and field test results for actual RC bridge pier. Also, the optimum resistance condition to chloride penetration is obtained according to degrees of fineness and replacement ratios of BFS concrete. As a result, resistance to chloride ion penetration for BFS concrete is more affected by replacement ratio than degree of fineness.

• Journal of Forest and Environmental Science
• /
• v.30 no.2
• /
• pp.243-252
• /
• 2014

Forest tree species usually takes for long periods to be harvested and cultivated but spearmints are a good model system for woody plant because of reducing and shortening cultivation time. Spearmints are good model plants (Mentha species) for research about terpenoids production and industrial essential oil manufacture. Isopentenyl pyrophosphate isomerase (Iso) and limonene synthase (Limo) are the key enzymes of terpenoid biosynthesis pathway. Transgenic and wild spearmints (Mentha spicata, MS) were cultured in vitro and assessed for the essential oil contents. The content of essential oil of transgenic spearmint also was enhanced slightly depending on the target terpenoid genes. In an attempt to increase productivity of terpenoids further, salt and fungal elicitation strategy was adopted on transgenic Mentha spicata. The salt (800 mM NaCl) as abiotic and two fungi (Botrytis cinerea and Glomerella cingulata) as biotic were used for elicitors. In the absence of salt stress four terpenoids were detected from the spearmint extracts, all of them being monoterpenes. On the other hand, the transgenic (MSIso) extracts contained eleven terpenoids (10 monoterpenes and 1 phenylpropene) while transgenic (MSLimo) extracts contained seven monoterpenes. After 3 days of fungal infection, the resistance indices further increased to 4.38, 3.89 and 2.04 for wild type, MSIso and MSLimo, respectively. The salt and fungal elicitators proved beneficial towards modifying both the terpenoids profile and improvement in the composition of essential oil. These results have important applications for the large-scale production of essential oils and forest biotechnology with respect to spearmint.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.535-541
• /
• 2018

Most construction methods for the repair and reinforcement of old reinforced concrete harbor structures involve a process of applying a fiber complex or fiber complex panel just like wallpaper to the bottom of structures, such as slabs or beams. On the other hand, these techniques result in the sealing of repaired and reinforced portions of the structures by the fiber products, preventing moisture, such as rainwater entering the structures through the upper surfaces of the slabs or beams from being released, and causing the entire concrete covering of the structures to be peeled off in the long run. To prevent this, it is necessary to develop a technique to protect the basic salt from the sea water from penetrating into the structures while expelling the water absorbed in the structures swiftly. This study attempted to solve the problem by modifying the anchor bolts currently used to repair and reinforce the port structure. That is, by drilling holes into the body of anchor bolts and modifying the caps of the bolts to produce a structure that would let the water flow like a toilet trap, the moisture inside of the structure could be drained through the holes in the anchor bolts. The water discharge anchor bolts developed were tested and observed for 6 months; the water was discharged in 73% of the anchors (200 anchor installation, 145 anchors).

• Journal of KIISE:Software and Applications
• /
• v.37 no.6
• /
• pp.417-429
• /
• 2010

Reversible watermarking inserts watermark into digital media in such a way that visual transparency is preserved and then enables to restore the original media from the marked one without any loss of media quality. This watermarking can be applied to quality-sensitive imaging such as medical imaging, military imaging, remote-sensing imaging, and precious artwork, where the original media should be preserved during image processing and analysis. In this paper, a reversible image watermarking technique that embeds message bits by modifying the differential histogram of adjacent pixels is presented. In order to satisfy both high embedding capacity and visual quality, the proposed technique exploits the fact that adjacent pixels in the image have highly spatial correlation. Also, we prevent overflow/underflow problem and salt-and-pepper artifacts by employing a predicted error compensation scheme. Through experiments using various test images, we prove that the presented technique provides perfect reversibility and high embedding capacity, while maintaining the induced-distortion low.