• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1904-1917
• /
• 2016

The moving average filter (MAF) is widely utilized to improve the disturbance rejection capability of phase-locked loops (PLLs). This is of vital significance for the grid-integration and stable operation of power electronic converters to electric power systems. However, the open-loop bandwidth is drastically reduced after incorporating a MAF into the PLL structure, which makes the dynamic response sluggish. To overcome this shortcoming, some new techniques have recently been proposed to improve the transient response of MAF-based PLLs. In this paper, a comprehensive performance comparison of advanced MAF-based PLL algorithms is presented. This comparison includes HPLL, MPLC-PLL, QT1-PLL, and DMAF-PLL. Various disturbances, such as grid voltage sag, voltage flicker, harmonics distortion, phase-angle and frequency jumps, DC offsets and noise, are considered to experimentally test the dynamic performances of these PLL algorithms. Finally, an improved positive sequence extraction method for a HPLL under the frequency jumps scenario is presented to compensate for the steady-state error caused by non-frequency adaptive DSC, and a satisfactory performance has been achieved.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.4
• /
• pp.293-298
• /
• 2009

This paper presents a variable gain current control algorithm for the stabilized grid connection between the grid and a doubly fed induction(DFIG) as a wind power generator. The performance of a RSC current controller depends highly on accurate machine parameters, and especially requires a fast and robust response regardless of the disturbances such as voltage sag. However, parameter variations of a DFIG occur at the point of grid connection, which affects the current controller gains based on DFIG parameters after a DFIG is connected to the grid. Thus, performance degrades when actual machine parameters depart from values used in the control system. In the proposed algorithm, current controller gains of the rotor side converter(RSC) are changed after a DFIG is connected to the grid. The simulation results and experimental results for a 750kW are shown to illustrate the feasibility of the proposed algorithm.

• Parasites, Hosts and Diseases
• /
• v.43 no.1 s.133
• /
• pp.19-25
• /
• 2005

Protective efficacy of vaccination with Neospora caninum multiple recombinant antigens against N. caninum infection was evaluated in vitro and in vivo. Two major immunodominant surface antigens (NcSAG1 and NcSRS2) and two dense granule proteins (NcDG1 and NcDG2) of N. caninum tachyzoites were expressed in E. coli, respectively. An in vitro neutralization assay using polyclonal antisera raised against each recombinant antigen showed inhibitory effects on the invasion of N. caninum tachyzoites into host cells. Separate groups of gerbils were immunized with the purified recombinant proteins singly or in combinations and animals were then challenged with N. caninum. Following these experimental challenges, the protective efficacy of each vaccination was determined by assessing animal survival rate. All experimental groups showed protective effects of different degrees against experimental infection. The highest protection efficacy was observed for combined vaccination with NcSRS2 and NcDG1. Our results indicate that combined vaccination with the N. caninum recombinant antigens, NcSRS2 and NcDG1, induces the highest protective effect against N. caninum infection in vitro and in vivo.

• Parasites, Hosts and Diseases
• /
• v.53 no.4
• /
• pp.493-496
• /
• 2015

Toxoplasmosis, caused by Toxoplasma gondii, is a parasitic zoonosis with worldwide distribution. The present study investigated the prevalence of T. gondii in dogs in Zhanjiang city, southern China, using both serological and molecular detection. A total of 364 serum samples and 432 liver tissue samples were collected from the slaughter house between December 2012 and January 2013 and were examined for T. gondii IgG antibody by ELISA and T. gondii DNA by semi-nested PCR based on B1 gene, respectively. The overall seroprevalence of T. gondii IgG antibody was 51.9%, and T. gondii DNA was detected in 37 of 432 (8.6%) liver tissue samples. These positive DNA samples were analyzed by PCR-RFLP at 3'- and 5'-SAG2. Only 8 samples gave the PCR-RFLP data, and they were all classified as type I, which may suggest that the T. gondii isolates from dogs in Zhanjiang city may represent type I or type I variant. This study revealed the high prevalence of T. gondii infection in dogs in Zhanjiang city, southern China. Integrated measures should be taken to prevent and control toxoplasmosis in dogs in this area for public health concern.

• Parasites, Hosts and Diseases
• /
• v.52 no.4
• /
• pp.367-376
• /
• 2014

Recombinant antigenic proteins of Toxoplasma gondii are alternative source of antigens which are easily obtainable for serodiagnosis of toxoplasmosis. In this study, highly antigenic secretory organellar proteins, dense granular GRA2 and GRA3, rhoptrial ROP2, and micronemal MIC2, were analyzed by bioinformatics approach to express as water-soluble forms of antigenic domains. The transmembrane region and disorder tendency of 4 secretory proteins were predicted to clone the genes into pGEX-4T-1 vector. Recombinant plasmids were transformed into BL21 (DE3) pLysS E. coli, and GST fusion proteins were expressed with IPTG. As a result, GST fusion proteins with $GRA2_{25-105}$, $GRA3_{39-138}$, $ROP2_{324-561}$, and $MIC2_{1-284}$ domains had respectively higher value of IgG avidity. The $rGST-GRA2_{25-105}$ and $rGST-GRA3_{39-138}$ were soluble, while $rGST-ROP2_{324-561}$ and $rGST-MIC2_{1-284}$ were not. $GRA2_{31-71}$, intrinsically unstructured domain (IUD) of GRA2, was used as a linker to enhance the solubility. The $rGST-GRA2_{31-71}-ROP2_{324-561}$, a chimeric protein, appeared to be soluble. Moreover, $rGST-GRA2_{31-71}-MIC2_{1-284}$ was also soluble and had higher IgG avidity comparing to $rGST-MIC2_{1-284}$. These 4 highly expressed and water-soluble recombinant antigenic proteins may be promising candidates to improve the serodiagnosis of toxoplasmosis in addition to the major surface antigen of SAG1.

• 한국석유지질학회:학술대회논문집
• /
• autumn
• /
• pp.57-72
• /
• 2000

The Murzuk Basin covers an area in excess of $350,000{\cal}km^2$, and is one of several intra-cratonic sag basins located on the Saharan Platform of North Africa. Compared with some of these basins, the Murzuk Basin has a relatively simple structure and stratigraphy, probably as a result of it's location on a the East Saharan Craton. The basin contains a sedimentary fill which reaches a thickness of about $4,000{\cal}m$ in the basin centre. This fill can be divided into a predominantly marine Paleozoic section, and a continental Mesozoic section. The principal hydrocarbon play consists of a glacial-marine sandstone reservoir of Cambro-Ordovician age, sourced and sealed by overlying Silurian shales. The present day borders of the basin are defined by tectonic uplifts, each of multi-phase generation, and the present day basin geometry bears little relation to the more extensive Early Palaeozoic sedimentary basin within which the reservoir and source rocks were deposited. The key to the understanding of the Cambro-Ordovician play is the relative timing of oil generation compared to the Cretaceous and Tertiary inversion tectonics which influenced source burial depth, reactivated faults and reorganised migration pathways. At the present day only a limited area of the basin centre remains within the oil generating window. Modelling of the timing and distribution of source rock maturity uses input data from AFTA and fluid inclusion studies to define palaeo temperatures, shale velocity work to estimate maximum burial depth and source rock geochemistry to define kinetics and pseudo-Ro. Migration pathways are investigated through structural analysis. The majority of the discovered fields and identified exploration prospects in the Murzuk Basin involve traps associated with high angle reverse faults. Extensional faulting occurred in the Cambro-Ordovician and this was followed by repeated compressional movements during Late Silurian, Late Carboniferous, Mid Cretaceous and Tertiary, each associated with regional uplift and erosion.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.7
• /
• pp.827-833
• /
• 2011

In this study, a simulation model to estimate the current-collection performance of a high-speed train was developed by using a commercial finite element analysis software, SAMCEF. A three-dimensional springDdamperDmass model of a pantograph was created, and its reliability was validated by comparing the receptance of the model to that of the actual pantograph. The wave propagation speed of the catenary model was compared with the analytical wave propagation speed of the catenary system presented in the UIC 799 OR standard. The length of the droppers was controlled, and the pre-sag of the contact wire due to gravity was considered. The catenary and the pantograph were connected by using a contact element, and the contact force variation when the pantograph was moved at velocities of 300 km/h and 370 km/h was obtained. The average, standard deviation, maximum, and minimum values of the contact force were analyzed, and the effectiveness of the developed simulation model was examined.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.143-144
• /
• 2011

최근 광전자 분야에서는 미래 에너지 자원에 대한 관심과 함께 GaN 기반 발광다이오드에 대한 연구가 활발히 진행되고 있다. 특히 InGaN/GaN 양자 우물 구조는 푸른색, 녹색 발광다이오드 구현에 있어 우수한 물질적 특성을 가지고 있다고 알려져 있다. 하지만 우수한 물질적 특성에도 불구하고 고인듐 고품위 막질 성장의 어려움으로 인해 높은 효율의 녹색 발광다이오드 구현하는 것은 여전히 어려운 실정이다. 이를 극복하기 위한 대안 중에 하나인 선택 영역 박막성장법(Selective Area Growth)은 마스크 패터닝을 통해 열린 영역에서만 박막을 성장하는 방법으로써 인듐 함량을 향상 시킬 수 있는 방법으로 주목 받고 있다. 선택 영역 박막 성장법을 이용하여 GaN를 성장하기 위해 그림 1의 공정을 통하여 n-GaN층 위에 SiO2 마스크를 포토리소그라피와 Reactive Ion Etching (RIE)를 이용한 건식 식각 공정을 통해 형성한 후 Metal Organic Chemical Vapor Deposition (MOCVD) 장비를 이용하여 선택적으로 에피를 성장하였다. 성장된 마이크로 피라미드 발광다이오드 구조는 n-GaN 피라미드 구조위에 양자우물 및 p-GaN을 성장함으로써 p-GaN/MQW/n-GaN 구조를 갖는다. 이렇게 생성된 피라미드 구조의 에피를 이용하여 발광다이오드를 제작한 후 그에 대한 전기적, 광학적 특성을 측정하였다. 2인치 웨이퍼의 중심을 원점 좌표인 (0,0)으로 설정하였을 때 2인치 웨이퍼에서 좌표에 해당하는 위치에서의 Photoluminescence (PL) 측정한 결과 일반적인 구조의 발광다이오드의 경우 첨두치가 441~451nm인데 반해 피라미드 구조의 발광다이오드의 경우 첨두치가 558nm~563nm 임을 알 수 있었다. 이를 통해 피라미드 구조 발광다이오드의 경우 일반적인 구조의 발광다이오드에 비해 인듐의 함유량을 증가시킬 수 있다는 것을 알 수 있다. 본 논문에서는 선택 영역 박막 성장법을 이용하여 마이크로 피라미드 InGaN/GaN 양자 우물 구조 구현과 광 전기적 특성에 대해 더 자세히 논의 하도록 하겠다.

• Journal of the Society of Disaster Information
• /
• v.13 no.2
• /
• pp.249-257
• /
• 2017

Recently, a cable disconnection accident occurred due to a lightning strike at the Seohae Bridge located in Dangjin-Pyeongtaek City. This is a natural occurrence, but it is a recall that it is very important to review the safety issues due to the disconnection of cable bridges. In other words, the role of cables in cable bridges has a profound effect on the safety of the structure, and it has become necessary to grasp the effect on the entire structural system. The cable bridge is an economic bridge that builds the main tower and supports the bottom plate by cable. The influence of the cable is the main member, which is a big influence on the safety of the whole bridge system. In the cable-stayed bridge, the cables exhibit nonlinear behavior because of the change in sag, due to the dead weight of the cable, which occurs with changing tension in the cable resulting from the movement of the end points of the cable as the bridge is loaded. Modal analysis is conducted using the deformed dead-load tangent stiffness matrix. A new concept was presented by using divided a cable into several elements in order to study the effect of the cable vibration (both in-plane and swinging) on the overall bridge dynamics. The result of this study demonstrates the importance of cable vibration on the overall bridge dynamics.

• Journal of Fashion Business
• /
• v.22 no.2
• /
• pp.27-39
• /
• 2018

This study analyzed the body shape of women over 70 years and classified their body shapes in order to provide basic data for the development of pants patterns that can complement the weakness of the body shape of elderly women. It were analyzed using SPSS Ver. 20.0. Five factors were extracted from the lower body: obesity and thigh thickness, lower body length, under knee thickness, ankle height, and hip sag. In type 1, the lower body was obese and the legs were thick, but the hips were not sagging. It was named 'high-hip obesity figure'. Type 2's abdomen, hip, and waist were obese, but the legs were thin and the hip were not sagging. Thus, 'bird-leg middle obesity figure' was the name. Type 3 had a long and slender lower body, but legs were thick and the hips were saggy, it was named 'strong-leg low-hip slender figure'. The elderly women showed less difference in waist, abdomen, and hip circumference. The abdominal circumference was 2-3cm more than the waist and hip circumference; hence there is a need to differentiate the shape and number of darts in the production of bottom-wear patterns for older women. In addition, the leg circumference is gradually reduced by aging compared to the size of the lower body. Therefore, it would be necessary to search for a method that can effectively design the difference between the hip circumference and the leg circumference in relation to the body shape and the aesthetics of older women.