• 품질경영학회지
• /
• 제49권2호
• /
• pp.127-143
• /
• 2021

Purpose: Smart Safety Living Lab is a Living Lab facility, constructed and operated by KITECH in Korea, to support the user experience(UX) evaluation, planning and certification of smart safety products and services. The purpose of this study is to develop a UX evaluation methodology that accommodates the characteristics of the Living Lab and smart safety products and services for a systematic and efficient UX evaluation in the Smart Safety Living Lab. Methods: A generic model of UX evaluation was first derived based on a review of related literature. Then, the generic model is revised to accommodate the characteristics of the Smart Safety Living Lab and smart safety products and services, resulting in the UX Evaluation Methodology for Smart Safety Living Lab (SSLL-UXEM). Results: The developed SSLL-UXEM consists of a structured process for UX evaluation, a guideline for conducting each step of the process, and a set of forms for recording the major evaluation results in each step. Conclusion: SSLL-UXEM can help to enhance the efficiency of the UX evaluation process and the consistency of the UX evaluation results. SSLL-UXEM is also expected to serve as a basis for UX evaluation in various living lab environments in the future.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제8권2호
• /
• pp.101-111
• /
• 2008

Good diagnostics improves both the safety and system unavailability of digital safety systems. The measure of a diagnostic capability is called the Coverage Factor. Because the Failure Modes, Effects and Diagnostic Analysis (FMEDA) provides information on the failure rates and failure mode distributions necessary to calculate a diagnostic coverage factor for a component, the FMEDA can be used as a useful tool to calculate it. Through performing FMEDA on a digital signal processor (DSP) board used in a digital safety system, it is shown that some components of the DSP board can be replaced or improved to satisfy the required diagnostic coverage. That is, the FMEDA can serve as a useful verification tool to design a diagnostic capability for the DSP board.

• 디지털산업정보학회논문지
• /
• 제17권4호
• /
• pp.133-146
• /
• 2021

In the field of food and drug, the role of the Ministry of Food and Drug Safety is becoming more important for national and public safety as well as national development and improvement of public welfare. Food and drug statistics are being used to determine the priorities and directions of policy for the promotion of public health and the development of the health industry. This study focuses on statistics from the MFDS. Through the analysis of the MFDS's statistics, the current status of the MFDS's production statistics was identified, and the survey of utilization and satisfaction of the MFDS's statistics was conducted on food and drug experts who actually use the statistics of the MFDS. In order to identify problems of the MFDS statistics, environmental factors affecting the MFDS statistics were derived, and the priorities of improvement tasks for its statistics were identified using AHP and IPA. In addition, the current situation of the statistical system, which serve as the basic coordinate for the establishment and execution of domestic food and drug policies, was identified and implications were provided.

• 수산해양기술연구
• /
• 제55권2호
• /
• pp.145-151
• /
• 2019

The coastal composite fishery has the highest rate of around 30.0% in registered fishing vessels of Korea for the last three years. The risk analysis for the fisher's safety of coastal composite fishing vessels was conducted to serve as a basic data for improving the healthy and safe working environment of fisher using fisher's occupational accidents of the national federation of fisheries cooperatives (NFFC) from 2016 to 2018 (n = 1,105). As a result, the occupational accident occurrence rate of coastal composite fishery was 3.76% in all industries, 7.8 times the rate of that. In addition, death and missing rate was found to have a serious level management to 10.10‱. Among the accidents, 76.0% occurred at sea. The slipping, others and contact with machinery or fishing gear occurred more frequently in order in the frequency of accident occurrence pattern. In the risk assessment using frequency and severity, slipping, contact with machinery and others showed high risk during fishing. The results are expected to contribute to identification and assessment of safety hazard occurred in coastal composite fishing vessels.

• 한국환경보건학회지
• /
• 제48권1호
• /
• pp.19-27
• /
• 2022

The industrial development and socioeconomic structures of a society are inextricably linked to occupational accidents and diseases. Since the 1970s, a series of major occupational diseases have occurred in South Korea, such as mercury poisoning in Munsong-myeon, carbon disulfide poisoning at Wonjin Rayon, and leukemia at Samsung Electronics. These incidents have caused us to take a critical look at the level of worker safety and health management within companies and the government. These serve as symbolic and representational events. Doctors, lawyers, and labor activists concerned about employee safety and lives came together for years to struggle with the government and industry in order to determine what caused the diseases and to obtain compensation for victims. They finally achieved recognition for occupational diseases and recompense for losses. It is difficult to find similar cases to the baby powder asbestos talc cases and the radon bed case internationally, or there is no case where such a large number of consumers have been potentially harmed. It is also difficult to prove that the damage took place due to the victims' diverse geographic locations and ages, as well as the disease's long incubation period. Based on this premise, businesses and the government have been apathetic in acknowledging these diseases and compensating for damages, with few practical outcomes. Furthermore, unlike the large-scale occupational disease cases, only a few people including expert groups were organized and actively participated in the settlement of these issues, so it remains unfinished business for our society to address.

• 대한안전경영과학회지
• /
• 제26권3호
• /
• pp.29-38
• /
• 2024

The purpose of this study is to use an evacuation simulation program to measure the change in evacuation time according to the width of the evacuation route due to the installation of an intermediate sales counter and the placement of a shopping cart between the sales counters of a large supermarket and to analyze the results. Currently, the "Distribution Industry Development Act" does not regulate the size and installation method of intermediate sales counters installed between sales counters that serve as practical evacuation routes in the event of a fire at a large supermarket, the size of shopping carts, etc. Considering this, we set evacuation route widths of 40, 50, 60, 70, 80, and 100 cm and compared and analyzed evacuation times according to various variables in the facility space. As a result of the experiment, as the width of the evacuation route was expanded, there was a significant difference in the evacuation time, from a maximum of 468.3 seconds to a minimum of 320.8 seconds. Considering the safety of evacuees in large supermarkets used by many people, it is time to regulate the size of intermediate sales stands installed between sales counters in large supermarkets and shopping carts that can become obstacles in an emergency.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.499-502
• /
• 2009

전체 시스템과 네트워크에 대한 전력의 공급과 전기안전은 필수적인 요소이다. 전기안전기술은 u-IT 기술의 발전과 함께 융복합화된 제품개발이 이루어지면서 제품에 대한 평가와 인증에 관한 연구가 필요하다. 본 논문에서는 전력기기와 u-IT기기의 융복합화 제품을 u-City에 적용시킬 전기안전 통합감시시스템을 개발하기위해, 전력기기 단말에서 가장 많이 사용되는 아울렛에서 접속불량 검출장치가 내장된 전력 IT 융복합화 기기를 만들었다. 전기안전 통합감시시스템에서의 원격 안전 점검을 위한 ZigBee, RFID의 센서를 이용하여 통신과 모듈의 성능 평가를 하고, PD, Arc 검출 진단 시스템에서 성능 실험 및 평가를 하여 적합 판정을 받은 제품에 대하여 KS, 전기안전 인증을 한다.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.13-19
• /
• 1999

This study deals with effects of heat-treatment on the bending fatigue of SCM420 spur gears. The test gears are heat-treated by two different treatments. After carburization, one group of the test gears is quenched directly, while another group is furnace cooled, reheated then quenched. The fatigue test at a constant stress amplitude is performed by using an electrohydraulic serve-controlled pulsating tester. The S-N curves are obtained and illustrated. By comparing the estimated strength with the experimental results, the validity of the previous experimental formula, presented by the authors for estimating the fatigue strength of carburized gears, was discussed for these tested gears.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.192-198
• /
• 1999

Work-related musculoskeletal disorders constitute a major source of employee disability and lost wages. Cumulative Trauma Disorders(CTD) refers to a category of physical conditions which result from chronic musculoskeletal injury. Assessment of CTD risk in industry at early stage allows for early control, a safe environment, and a healthier workforce. In this study, the physical load of the shipping work in the cold storage warehouse were especially investigated. Employees were working with almost unnatural posture in a very restricted work space. The questionnaire and biomechanical analysis were used to evaluate the physical load. Results from analyses showed that they were sufficiently exposed to CTD due to repetition and unnatural posture. Based on the analysis, ways for improving working conditions are proposed. The analysis and proposals in this paper will serve as a basic tool for designing/redesigning working environment such as improvement of tools and equipments, design of times for work/rest cycle.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2048-2051
• /
• 2010

Almost all companies have paid much attention to the safety management ranging from maintenance to operation even at the stage of designing in order to prevent accidents, but fatal accidents continue to increase throughout the world. In particular, it is essential to systematically prevent such fatal accidents as fire, explosion or leakage of toxic gas at factories in order to not only protect the workers and neighbors but also prevent economic losses and environmental pollution. In addition, HRA may be used to detect the human errors which may cause accidents or trace back to any mistake on the part of workers. Usually, HRA technique is used in association with other risk assessment techniques. Moreover, it can serve to enumerate the human errors which may occur during operation or down-time or correct the existing system to reduce the mistakes. This work focuses on the coincidence of human error and mechanical failure for management of human error, and on some important performance shaping factors to propose a method for improving safety effectively of the process industries.