• Journal of the Korean Society of Safety
• /
• v.25 no.4
• /
• pp.36-41
• /
• 2010

This paper seeks to survey and analyze the status of obligatory execution from key institutional aspects that have taken effect according to laws on creating safe environment for laboratory and of general details such as the level of satisfaction on the part of people engaged in research activity regarding the laws after they have taken effect. The subjects of this study were MA and PhD graduate students in science and engineering who are primarily involved in research. This questionnaire survey was focused on finding basic data required for safety education for researcher and for efficient safety management by examining the correlation between education time and level of satisfaction. The collected data were analyzed by using frequency analysis, descriptive statistics, one way anova by SPSS12 package. The results obtained by this study are as follow. 1) Awarences of safety management rules, ordinary inspection, safety education were around 70% and other law clauses were around 50%. 2) The general satisfaction after the Laboratory Safety Act enforcement was usual level with 4.72 points in 7. 3) Researchers demanded ordinary inspection and protective equipment in a safe environmental composition. 4) The safety education time for improvement of a safe consciousness level was needed 12h or 24h at 1 years.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.2
• /
• pp.204-211
• /
• 2012

In this study, appropriate preventive measures are suggested as follows by analyzing industrial accident cases occurred for five years of company J and workers' survey. First, personnel management including meticulous shift work and rotation task for older workers should be made strictly in terms of safety and health management. Second, Industrial disasters occurred more in spring than in other seasons, so safety management will have to be enhanced in spring. That is, to reduce industrial disaster various occupational safety and health activities to prevent spring fatigue are needed. Third, to improve safety consciousness of workers, penalties for those who have not received safety training and for people without protective equipment are required. Also, hazard prediction training such as Tool Box Meeting shall be proceeded. Fourth, building of proactive safety culture that the workers themselves handle risk factors is urgent. Fifth, the company-wide safety and health programs including safety awards and cases presentation are needed to be planned.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.2
• /
• pp.113-120
• /
• 2023

Occupational safety and health management expenses in the construction industry are statutory and separately included in the cost statement to prevent occupational accidents and health problems. The expenses are determined by multiplying the standard amount by the rate decided according to construction types and scales. However, the current expense appropriation method does not properly reflect the recent changes in the construction industry such as industry size, industry diversification, and social atmosphere about safety reinforcement. This study surveyed 1579 questionnaires in total and analyzed expense execution rate and proportion of each expense category. The expense execution rate was relative higher in complex construction (e.g., heavy construction = 126%, civil engineering = 125%) and long-period project (equal to or over 48 months construction = 133%) compared to general construction (98~116%) and short-period project (less than 48 months construction = 115%). The proportion of spending expenses was higher in the category of safety manager labor costs (25~52%), safety facility costs (22~40%), and personal protective equipment costs (10~25%). The analysis results of the study can be utilized in revising the standard expense appropriation method by reflecting the current usages of the occupational safety and health management expenses in the construction industry.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.1
• /
• pp.71-77
• /
• 2010

Protection against lightning surge is an essential part of almost any electrical and electronic equipment today. Metal Oxide Varistor(MOV) is the single most important component in the overwhelming majority of the Surge Protective Devices(SPD) designated to provide such protection. In this paperr various types of MOV based SPD are inspected and experiments are carried out on the side effects of the low Measured Limiting Voltage(MLV) characteristics. Experiment results show that a lower MLV could cause a higher Temporary Overvoltage(TOV)-induced SPD failure rate in the field, and SPD are more likely to be victims rather than protectors in a TOV scenario. This means that from a safety perspective, the SPD should be specified with higher TOV withstand capability(UT) and faster SPD disconnector.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.719-723
• /
• 1998

Prevention of the islanding phenomena is one of the most important issues because it can damage electrical equipment connected to the utility system and endanger human life. It is very difficult to detect an islanding condition of a power distribution line with conventional voltage of frequency relays, while the output power and the load power of utility interactive PV inverter units are in nearly balanced state in both active power and reactive power. This paper describes the protective equipment that prevents the PV system connected to the utility grid from starting islanding. Both predictive ocntrol method and harmonic injection method are used for a current control and islanding detection for operating safety.

• Journal of the Korean Society of Safety
• /
• v.37 no.6
• /
• pp.136-147
• /
• 2022

The purpose of this study is to analyze four cases of firefighter burns in various fire scenes and to find prevention measures to decrease firefighter injuries. Among the analysis reports prepared by the National Fire Research Institute of Korea from 2016 to 2020, four burn-related accidents are summarized and the main causes are conveyed. The four accidents include second-degree burns from using extinguishers during containment of fires; nine firefighters burned due to re-ignition in the LPG car repair shop; two firefighters injured with third-degree burns from using fire extinguishers during life-saving events in residential housing; and injuries from the radiant heat of the tank BLEVE near the factory fire. These cases are comprehensively investigated in their respective scenes and analyzed based on the fire site investigation reports from the fire department and related theoretical explanations of risk for each accident scene. In the third case study, some experimental research is conducted to evaluate the risk involved with the use of safety gloves. This is evaluated by reviewing Fire Tactics and Standard Operational Procedures (SOP) to determine improvements and recommendations for an efficient firefighting response. Results show that the main causes of burn accidents are the insufficient use of personal protective equipment (PPE), such as safety gloves, and the failure to follow firefighting tactics or SOPs. Through the accident investigation and assessment, it is concluded that to reduce the frequency of burn accidents, the performance of firefighting equipment, SOPs, protection tactics, and safety policy systems require improvement.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.1
• /
• pp.35-43
• /
• 2016

The past five years, industrial accidents due to food processing machinery have been occurred 725 cases, injury by the food cutter occurred 390 cases in its. On this study, to prevent food cutter injury, an attempt is made to present the improved documentation of fundamental safety of the food cutter workplace through the injury analysis of food cutter injury and surveys on band saw machine business field. Analyzing the result of 390 cases on food cutter injury, amputation, cut, puncture occupied 75.1 percent (293 cases), compressed occupied 23.3% (91 cases), also it showed constant component without reference to gender, age, scale of work place, service period. In the survey, lack of concentration for workers have been pointed out as the biggest factor in the cause of band saw machine injury. Meanwhile, such as the EU and Japan, whereas presents safety standards about band saw machines that are tailored to each country, on the other hand, South Korea doesn't provide the standards. To prevent the food cutter injury, safety standards need to be established in consideration of amputation, cut, puncture, compressed injury and financial support is required to procure protective equipment at each place of business.

• Korean Parent-Child Health Journal
• /
• v.10 no.2
• /
• pp.110-122
• /
• 2007

Purpose: The purpose of this study was to research the actual state of the toddler and preschooler safety seats built into the car. Method: The design was a descriptive study by questionnaire. Data were collected from August, 1, 2007 to September, 30, 2007. A total 232 toddler and preschooler parents in Seoul and Inchon. Data were analysed using SPSS WIN 12.0. Result: The study show that people who did not get a education are 86.2%. Using the child safety seats also show that 96.1% of respondents are holding in their arms, only 3.0% of respondents used them. 21.1% answered that they get on the vehicles with holding their children in their arms and 48.3% answered that they let their children alone on the seat, just 29.7% are using the child safety seats. Conclusion: To increase child safety seats configurations rate, available education is needed. For this, contents about child safety seats must be included for education leaving the hospital by nurses who work in nursery. For the consideration about child safety seats configuration rate, complement of the legal system and development of available protective equipment and economical support of the nation and the local community is needed.

• Safety and Health at Work
• /
• v.7 no.2
• /
• pp.89-96
• /
• 2016

The incidence of occupational injuries and diseases associated with industrialization has declined markedly following developments in science and technology, such as engineering controls, protective equipment, safer machinery and processes, and greater adherence to regulations and labor inspections. Although the introduction of health and safety management systems has further decreased the incidence of occupational injuries and diseases, these systems are not effective unless accompanied by a positive safety culture in the workplace. The characteristics of work in the $21^{st}$ century have given rise to new issues related to workers' health, such as new types of work-related disorders, noncommunicable diseases, and inequality in the availability of occupational health services. Overcoming these new and emerging issues requires a culture of prevention at the national level. The present paper addresses: (1) how to change safety cultures in both theory and practice at the level of the workplace; and (2) the role of prevention culture at the national level.

• Journal of the Korean Society of Safety
• /
• v.19 no.2
• /
• pp.26-33
• /
• 2004

This study presents a hazard assessment of the human body exposed to electic shock considering various parameters which affect severity of the electric shock. The present study has two research objectives; one is no analyze hazards of the human body by the elctric shock both on the ground and in the water. The other is to understand the mechnism of the electric shock. In order to achieve these objectives the hazard of shock is estimated by comparing with physiological effects of electric curren througn the human body according to variation of shock parameters of shock circuits. The shock parameters adopted in this paper consist of body resistance, resistance of protective equipment, ground resistance, shock duration, depth of gound surface layer, relection factor, permissible touch voltage, body current and body voltage. Besides, safety standard determining hazard degree of the human body is introduced. And hazard of the human body due to the electric shock is quantitatibely assessed in consideration of data obtained by the method suggested herein, and final results are presented and discussed.