• Journal of Ship and Ocean Technology
• /
• 제12권4호
• /
• pp.32-39
• /
• 2008

According to the increase of the requirement for the safety and environmental protection at sea, safety is a core design factor of maritime systems. Safety is defined as a perceived quality that determines to what extent the management, engineering and operation of a system is free of danger to life, property and the environment. There are many possible approaches in dealing with the safety of ships. The risk-based approach is one of the most systematic and reasonable way currently in design, operation and regulatory works for ship safety. This paper proposes a concept of total risk management for ship safety, and introduces a prototype system implemented based on this concept as a framework of design and operation of ships.

• 대한안전경영과학회지
• /
• 제9권6호
• /
• pp.1-7
• /
• 2007

A study wish to present relation of safety characteristic deployment, which has the safety demand, safety characteristic, protection characteristic, safety regulation, safety education of unit work process. Safety characteristic deployment will be used in safety management education system design with a method of safety management system construction of unit work process.

• 한국전자파학회논문지
• /
• 제22권2호
• /
• pp.208-213
• /
• 2011

본 논문은 안전 서비스를 제공하는 Global Positioning System(GPS) 보호 비(Ratio of Interference to Noise: I/N) 도출을 위해 Ultra Wide Band(UWB)로부터 GPS 간섭 영향을 분석하였다. GPS 측위 오차 2.5 m 이하를 만족하기 위한 UWB 송신기와 GPS 수신기 사이의 최소 보호 거리를 산출하였고, 최소 결합 손실 방법(Minimum Coupling Loss: MCL)을 이용하여 측위 오차를 만족하는 UWB 송신기와 GPS 수신기 사이의 보호 거리 값에 근거하여 GPS 시스템의 보호비(I/N)를 도출하였다. 그 결과, 측위 오차 2.5 m 이하를 만족하기 위한 GPS 보호 거리는 10 m 이상으로 계산되었고, 이를 만족하기 위한 GPS 보호비(I/N)는 -20 dB 이하로 도출되었다. 제안된 GPS 시스템 보호비는 국제전기통신연합(ITU-R)에서 제안한 GPS 시스템 중 안전 서비스에 해당하는 보호비(I/N)를 만족시킴을 확인하였다. 또한, 본 논문을 통해 얻어진 GPS 보호 비의 결과는 안정적인 국내 GPS 시스템 운용을 위한 기준으로 이용될 수 있다.

• 대한안전경영과학회지
• /
• 제9권1호
• /
• pp.197-211
• /
• 2007

The power of semiconductor, Korea is continuously constructing semiconductor production line for keeping a front-runner status. however, studies and data about potential risks in semiconductor factory are still short. If fire does not initially suppressed, the fire causes a great damage. To decrease fire risk factors, in addition to fire fighting safety equipment, more important thing is how to design and construct fire protection system. The current fire protection codes about semiconductor factory come under functional law, and this law is short of consideration about particularity of factory. The existing prescriptive fire codes depending on experience compose without evident engineering verifications, thus equipments which is created by the current prescriptive fire code may bring about a variety of problems. For example, the design under the current regulation can not cope with the excessive investments, low efficiencies, and the diversifying construction designs and be applied to the quick changes of new technologies. Ergo, an optimal design for fire protection is to equip fire protection arrangements with condition and environment of production field. Manufacturing factory of semiconductors is a windowless airtight space. And for cleanliness, there exists strong flow of cooperation. Therefore, there is a need for fire safety design that meets the characteristic of a clean room. Accordingly, we are to derive smoke flow according to cooperation process within a clean room and construction plan of an optimal sensor system. In this study, in order to confirm the performance of proposed smoke-exhaust equipment and suggest efficient smoke exhaust device when there is a fire of 1MW of methane in the clean room of company H, we have implemented fire simulation using fluid dynamics computation.

• 에너지공학
• /
• 제2권2호
• /
• pp.171-178
• /
• 1993

The CANDU nuclear-electric generating system, developed in Canada beginning in about 1950, has reached full maturity with 22 units operating in other countries, and 13 units under construction, as shown in Table 1. Production and economic performance of modern CANDU units is competitive with other nuclear generating stations in the world. The safety record of these plants is excellent; their level of safety protection against severe accidents is at least equal to that of other commercial designs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.275-277
• /
• 2005

In a lithium-ion battery which is being used in many portable electronic goods, electrolyte is disaggregated and then the gas is happened when electric charging volt is over the 4.5V. So, the pressure on the safety valve is increased and electrolyte is leaked out in the cell. It leads to the risk of explosion. On the other hand, in the case which the battery is discharged excessively, the negative pole is damaged and the performance of the battery is deteriorated. The protection module of a lithium-ion battery is used for preventing such risk and the inspection system is needed to check the performance of such protection module. In this research, a PC-based auto inspection system is developed for the inspection of a battery protection module using Dallas chipset. In the inspection system, AVRl28 chip is used as a controller and the communication protocol is developed for the data communication between the protection module and the AVR128 chip. And GPIB interface is used for the control of measuring devices. Also, MMI environment is developed using LabView for convenient monitoring by the tester.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.68-81
• /
• 2003

Rockfall protection fence is one of the most common rockfall protection methods in Korea. If rockfall protection fences are required along the road or railway, their location, height and capacity, in terms of the maximum kinetic energy that they can absorb, should be specified. Within this paper, the best practice of rockfall barrier is introduced. Modern rockfall simulations as a means to define risks, protection requirements, dynamic loading and height of potential structures and selection of appropriate placement is presented. Technical possibilities of rockfall barriers and their actual limits are presented. Safety concepts based on probabilities approaches are proposed. Recent studies performed in other countries show that Flexible Barriers are also a feasible system to stop and retain debris flows. Finally an outlook onto further development is given.

• International Journal of Internet, Broadcasting and Communication
• /
• 제6권2호
• /
• pp.20-24
• /
• 2014

These days the large-scale car accidents have often been occurred by overspeeding in disregard of sharp curve, foggy and freezing regions. This paper has proposed the algorithm to calculate the safety speed in real time that can protect the car accidents under these weather and road conditions using Fuzzy reasoning theory. Under raining and snowing, drivers have to slow down the traffic safety speed by 1/3 of the traffic safety speed indicated on the existing speed sign plate based on their decision. So it is difficult to calculate and then observe the safety speed. This paper has performed the simulation that provides the deivers with the optimal safety speed considering the road and weather conditions in real time to improve these problems. We have proved this method can improve more 25% than the existing one.

• 해양환경안전학회지
• /
• 제27권5호
• /
• pp.566-573
• /
• 2021

본 연구는 스마트 자율운항선박(Maritime Autonomous Surface Ship, MASS) 기술 개발 및 실증을 위한 산학 과제로서 목포해양대학교와 삼성중공업이 함께 참여한 연구가 안전하게 실시되어 질수 있도록 안전관리 절차서를 개발하였다. 본 연구에서는 국내 및 국제해사기구(International Maritime Organization, IMO)의 관련 가이드라인 및 해사 관련법 검토를 거쳐 안전관리 절차서를 개발하였다. 안전관리 절차서는 자율운항선박의 관련 해당 당국과 이해관계자들이 시스템 및 기반 시설에서 시험의 안전 및 환경 보호와 관련하여 적절하게 실시하기 위하여 국제해사기구에서 제시한 자율운항선박 시험을 위한 지침(MSC.1/Circ.1604, Annex : Interim guidelines for MASS trials)의 의거하여 개발 하였다. 개발된 안전관리 절차서는 당직체제로 운항 중인 선박에 항해보조기기로 탑재한 자율운항요소기술을 적용한 시스템의 해상 실증 시험을 위하여, 대한민국 연안의 해양환경보호와 항행 안전을 준수하면서, 관련 시스템의 시험이 안전하고 안정적으로 수행할 수 있도록 개발되었다.

• 산업경영시스템학회지
• /
• 제19권38호
• /
• pp.69-76
• /
• 1996

The Special safety systems are incorporated into the plant design to limit radioactive releases to the public in the event of accident. Wolsung 2 is better builted than Wolsung 1 by 84 design changes for new approval requirements, codes & standards changes and manufacturing changes etc. This paper analysed and discussed the design change items for nuclear reactor safety system and needs development of design engineering for digital protection system.