• Korean Journal of Construction Engineering and Management
• /
• v.5 no.2 s.18
• /
• pp.90-105
• /
• 2004

Machines for crack sealing automation have been continually developed since the early 1990's because of the effectiveness of crack sealing that would be able to improve safety, quality and productivity. It has been considered challenging problem to detect crack network in pavement which includes noise (oil marks, skid marks, previously sealed cracks and inherent noise). Moreover, it is required to develop crack network mapping and modeling algorithm in order to accurately inject sealant along to the middle of cut crack network. The primary objective of this study is to propose machine vision algorithms (digital image processing algorithm and path planning algorithm) for fully automated pavement crack sealing. It is anticipated that the effective use of the proposed machine vision algorithms would be able to reduce error rate in image processing for detecting, mapping and modeling crack network as well as improving quality and productivity compared to existing vision algorithms.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.12
• /
• pp.47-56
• /
• 2010

The construction of new roads and the consistent extension of already-existing roads or the line-shape revision of those roads are increased with the governmental investment to SOC facilities currently. Accordingly, the road cut slopes are in the trend of rapidly increasing. As the road slope has increased, a lot of human and property damages has entailed consequently and in the local case, numerous studies have carried out aiming at minimizing this damages caused by the rockfall and landslide. In general, standard falling rock prevention facility has employed for most of the local road slope based on "Guide for Installation and Management of Road Safety Facilities" published by MLTM(the Ministry of Land, Transport, and Maritime Affairs) but profound doubt has raised as to whether this rockfall prevention facility would function properly enough to prevent rockfall efficiently without any damages in case of actual occurrence of rockfall. In addition, it is a reality that in most cases, such work is relied on overseas technology as a whole as the local technical level is low and in case of rockfall prevention net, it is judged that a study on rockfall prevention net that is able to endure more powerful rockfall energy is required as the problem including net bursting is taken place as a result of enough bearing force being failed to be demonstrated due to its partial weak point(not uniformly made). Under this background, in this study, three kinds of model depending on mesh size of expanded metal that is considered to have an adoptability as rockfall prevention net, as target are selected and characteristics depending on mesh size of expanded metal is intended to be researched through a pull-out test performance by using pull-out test equipment rockfall prevention net.

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.6
• /
• pp.1153-1166
• /
• 2011

Detecting misbehavior in vehicular ad-hoc networks is very important problem with wide range of implications including safety related and congestion avoidance applications. Most misbehavior detection schemes are concerned with detection of malicious nodes. In most situations, vehicles would send wrong information because of selfish reasons of their owners. Because of rational behavior, it is more important to detect false information than to identify misbehaving nodes. In this paper, we propose the variable precision rough sets based misbehavior detection scheme which detects false alert message and misbehaving nodes by observing their action after sending out the alert messages. In the proposed scheme, the alert information system, alert profile is constructed from valid actions of moving nodes in vehicular ad-hoc networks. Once a moving vehicle receives an alert message from another vehicle, it finds out the alert type from the alert message. When the vehicle later receives a beacon from alert raised vehicle after an elapse of time, then it computes the relative classification error by using variable precision rough sets from the alert information system. If the relative classification error is lager than the maximum allowable relative classification error of the alert type, the vehicle decides the message as false alert message. Th performance of the proposed scheme is evaluated as two metrics: correct ratio and incorrect ratio through a simulation.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.1
• /
• pp.1-12
• /
• 2000

The ships over the certain navigation area or her length are required to carry charts under the relevant laws. Charts are indispensible to the ships and fishing vessel, because their crew should know the water depth and location of obstacle in order to avoid danger in the navigation and fishing area. But it was found that many ships do not carry proper charts onboard according to the research marine accidents files of marine accident inquiry agency, and questionnaire survey. Consequently, many ships run aground on the coast and port. This study examined the present status of the coastal ship and the fishing vessels, and explained some problems in the aspect of the covering area, the place, the number of the selling agent and adjoining chart, as well as the geographical and traffic density, the crew on board the ship's characteristics, and so on. In this study we propose the way to solve the problem. firstly, the category of the fishing vessel which should carry the chart on bard under the related laws are required to be lowered to 10 gross tons. Besides a ship inspector should examine if the charts covering the area where to navigate even when the temporary inspection is done are carried on board property. Secondly, the inspection body or the controlling office of ship's entry and departure should check throughly whether the ships concerned carry the chart on board. Thirdly the fishing vessels should used the fishing charts, and the body concerned should train the offices about how to use chart, especiany the difference between Tokyo datum and WGS-84 datum. Fourthly the customized chart such as an atlas like a map, a calenda-type chart, a small chart, as a coated chart needs to be publish for the safety of small ship and fishing vessel. Fifthly, it is advisable to draw a recommended course in the route where the coastal navigate mainly and in the narrow channel, The adjoining area should be improved, as well as the qualify of the chart paper. Sixthly, publication of additional new chart in the southern part of East Sea, the eastern part of South Sea, the western part of South Sea and middle part of Yellow Sea near Incheon port should be thought over. Seventhly, the number of chart selling agent should be increased for the sake of purchaser in proportion to the number of port, and small correction of charts in selling agent must be carried out completely.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.381-391
• /
• 2008

The eigenvalue technique is introduced to overcome the problem of truncation errors caused by temporal discretization of numerical analysis. The eigenvalue technique is different from simulation in that only the space is discretized. The spatially discretized equation is diagonized and the linear dynamic system is then decoupled. The time integration can be done independently and continuously for any nodal point at any time. The results of eigenvalue technique are compared with the exact solution and FEM numerical solution. The eigenvalue technique is more efficient than the FEM to the computation time and the computer storage in the same conditions. This technique is applied to the solute transport analysis in nonuniform flow fields around underground storage caverns. This method can be very useful for time consuming simulations. So, a sensitivity analysis is carried out by using this method to analyze the safety of caverns from nearly located contaminant sources. According to the simulations, the reaching time from source to the nearest cavern may takes 50 years with longitudinal dispersivity of 50 m and transversal dispersivity of 5 m, respectively.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.2
• /
• pp.95-105
• /
• 2020

In this study, using the CADMAS-SURF model, the characteristics of the wave pressures and the wave forces were analyzed according to the installation position of the parapet on top of the caisson, and the stability evaluation was carried out using estimated wave forces for the design wave condition. Numerical results show that adopting the rear-parapet reduces the front maximum wave pressures and wave forces, and the maximum wave pressure acting on the rear-parapet increases slightly compared to the front parapet, but the wave force acting on the rear-parapet has little effect on the stability of the breakwater due to the phase difference with the wave force acting on the front of the breakwater. In addition, impulsive wave pressures did not occur, as Yamamoto et al. (2013) pointed out the problem of the rear-parapet breakwater. As a result of the stability against sliding and overturning, it was estimated that the target safety factor of 1.2 could be secured by the self-weight of 13% less than the case of the front parapet. At this time, the maximum ground pressure was also reduced by 30%, and the applicability of the rear-parapet structure to the actual site was evaluated as high.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.609-616
• /
• 2017

In this paper, we propose an algorithm to obtain more stable and high recognition rate by using left and right rotation information of input image in order to obtain a stable recognition rate in face recognition. The proposed algorithm uses the facial image as the input information in the web camera environment to reduce the size of the image and normalize the information about the brightness and color to obtain the improved recognition rate. We apply Principal Component Analysis (PCA) to the detected candidate regions to obtain feature vectors and classify faces. Also, In order to reduce the error rate range of the recognition rate, a set of data with the left and right $45^{\circ}$ rotation information is constructed considering the directionality of the input face image, and each feature vector is obtained with PCA. In order to obtain a stable recognition rate with the obtained feature vector, it is after scattered in the eigenspace and the final face is recognized by comparing euclidean distant distances to each feature. The PCA-based feature vector is low-dimensional data, but there is no problem in expressing the face, and the recognition speed can be fast because of the small amount of calculation. The method proposed in this paper can improve the safety and accuracy of recognition and recognition rate faster than other algorithms, and can be used for real-time recognition system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.577-580
• /
• 2006

The rapidly growth of Internet is main factor that activates the Digital Contents market. However imprudent Digital Contents market could be shrunk by imprudent illegal copy and delivery. MPEG(Moving Picture Experts Group) proposed MPEG-21 Multimedia frameworks in order to solve these problem. IPMP is parts of MPEG-21 Multimedia Frameworks, when Digital Contents goes through production delivery consumption, which defines standard to keep the Digital Contents in safety. Currently IPMP defined by FCD(Final Committee Draft) level. Therefore development of system which applied to latest standard to protect and manage the Digital Contents is required. and the system consists of fourth organizations which means Metadata Production server, Tool server, License server, Consumption server. In this Paper, we made production server to parse REL(Rights Expression Language) document that has right information for content from license server, and create metadata based on MPEG-21 IPMP about the content that applied to watermark. then, after it do remuxing, transmit the protected data to consumption server.

• Smart Media Journal
• /
• v.6 no.1
• /
• pp.61-67
• /
• 2017

A large number of people living in modern times prefer remaining unmarried or living alone independently for the reason of their own will or another person's will. This is because they dislike being interfered with by other persons or because there is a financial problem. This behavior has become mainstream in persons working for professional jobs, persons having a strong disposition toward individual activity or college students. In particular, career women pursuing their own comfortable life have the tendency to prefer single life. However, sometimes, they become a target of crime that targets and makes bad use of this point. For these reasons. Consequently, sometimes, they additionally install and use a security system such as door security guard at front door and so on. It is not so difficult to lock the door security guard at the front door. However, it is apt to be forgotten. And when they are on the bedspread before falling asleep, in case they should check whether the door security guard is locked or in case they should lock it, they should get up, go to the entrance, and check and lock the door security guard. They often don't lock the door security guard due to their feeling that it is all right because of annoyance and inconvenience. This paper is intended to work for safety from crime such as illegal housebreaking by more conveniently using the door security guard after designing and implementing a system that can remotely control the door security guard, using a smartphone as a method of resolving this annoyance and keeping life more safe.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.1
• /
• pp.120-130
• /
• 2012

As long span and complex bridges are constructed often recently, safety estimation became a big issue. Various types of measuring instruments are installed in case of long span bridge. New wireless technologies for long span bridges such as sending information through a gateway at the field or sending it through cables by signal processing the sensing data are applied these days. However, The case of occurred accidents related to bridge in the world have been reported that serious accidents occur due to lack of real-time proactive, intelligent action based on recognition accidents. To solve this problem in this study, the idea of "communication among things", which is the basic method of RFID/USN technology, is applied to the bridge monitoring system. A sensor node module for USN based intelligent bridge system in which sensor are utilized on the bridge and communicates interactively to prevent accidents when it captures the alert signals and urgent events, sends RF wireless signal to the nearest traffic signal to block the traffic and prevent massive accidents, is designed and tested by performing TinyOS based middleware design and sensor test free Space trans-receiving distance.