• Journal of the Korean Society of Safety
• /
• v.11 no.1
• /
• pp.53-59
• /
• 1996

To protect the damages or the disasters caused by overheating of industrial electric equipments or electric home appliances, a temperature sensitive thermal fuse is generally used in those equipments. Thermal fuses cutoff the current flow when the temperature of the electric equipments are abnormally overheated and over the certain temperature. Therefore thermal fuse is one of the most important elements in the sense of safety. Thermal fuses are classified into two types according to thermally sensitive materials, a low temperature melting alloy and an organic chemical compound. Domestic products of thermal fuses are now only with an organic chemical compound. Domestic products tested by using cutoff test and aging test etc. are satisfied UL specification. It's shown that the accuracy and the precision of the domestic products are as good as those of the overseas products obtained UL mark. However, some of domestic products show the reclosing problem which is mainly related the safety. This problem should be solved to make the reliable thermal fuses. In this paper, our Interest is to find out the causes of reclosing. In the comparison between thermally sensitive materials occurred reclosing and those occurred no reclosing, the test effects show that the characteristics of emitting heat and absorbing heat are different.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.371-372
• /
• 2023

If the participants in construction site safety management perform their duties in accordance with the provisions of the Industrial Safety and Health Act, the burden on safety managers would be minimal. However, the lack of specific work guidelines for each participating entity and the greater responsibility of the safety and health general manager than the management supervisor have resulted in safety managers' workload being increased due to the problem of management supervisors' neglect of safety management. In this study, we conducted a survey of the safety manager's duties and related documents during the construction project initiation, early stages, ongoing work, and disaster occurrence/investigation, and conducted interviews to improve and enhance the division of duties.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.15 no.1
• /
• pp.63-72
• /
• 1990

This problem in this paper concerns the determination of safety stock for multi-echelon invenetory system. In this model the criterion is to minimize system safety stock subject to a service level constraint and expected annual total cost. Then, safety stock is determined by minimizing expected annual total cost and satisfying given service level. This expected annual total cost is obtained by expected total inventory holding cost plus the expected total stockout cost. Numerical example is given in a three-echelon inventory system. The results obtained by the use of the Hill Algorithm.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.94-95
• /
• 2013

Construction safety education plays role to provide necessary skills to workers for working safely. It is also important safety measure be used efficiently without any restriction to construction accident prevention. On this study, to develop effective education contents, we analyzed propriety of education contents used in construction sites, drew problem, and suggested the improvement direction.

• Journal of the Korean Society of Safety
• /
• v.18 no.4
• /
• pp.110-114
• /
• 2003

In this study is proposed the advanced elasto-plastic analytical method which can identify complex structural behaviors on the splice part of steel structures such as sliding and plastic contact problem between splice plates and blots. Compliated boundary conditions and various manufacturing defects are considered in various analytical cases. In the design or repair phase the plastic behavior and ultimate strength of splice parts should be very carefully verified to extend the service life of steel structures.

• Nuclear Engineering and Technology
• /
• v.42 no.4
• /
• pp.377-381
• /
• 2010

In 2007 the Nuclear Energy Agency's Committee on the Safety of Nuclear Installations published Best Practice Guidelines for the use of CFD in Nuclear Reactor Safety. This paper provides an overview of the document' contents and highlights a few of its recommendations. The document covers the full extent of a CFD analysis from initial problem definition and selection of an appropriate tool for the analysis, through final documentation of results. It provides advice on selection of appropriate simulation software, mesh construction, and selection of physical models. In addition it contains extensive discussion of the verification and validation process that should accompany any high-quality CFD analysis.

• Journal of Information Technology Services
• /
• v.10 no.3
• /
• pp.49-59
• /
• 2011

A ship scheduling model is presented for the raw material transportation problem with yard storage constraints in a steel mill. The problem is formulated as 0, 1 mixed integer programming considering such constraints as loading port conditions, ship size and hold capacity, unloading conditions, and yard storage space. In addition, inventory related constraints including safety stock are taken into consideration to support the continuous operations of steel making process. The proposed model has been implemented and applied successfully to a real world problem, and its results show the improvement of performance compared to the traditional method. For example, the arrival dates of ships are determined satisfying the constraints. The total inventory level is minimized at the stock yard as a result. Also, the safety inventory level is always kept at the planning stage, and the standard deviation of total inventory level is reduced significantly. Further research is expected to develop efficient heuristics to have a better response time for even larger scale problems.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.8
• /
• pp.808-812
• /
• 2008

In recent years, the software vulnerability becomes an important problem to the safety in operating system kernel. Many organizations endeavor to publish patches soon after discovery of vulnerability. In spite of the effort, end-system administrators hesitate to apply the patches to their system. The reasons of hesitation are the reboot disruption and the distrust of patches. To solve this problem we propose a dynamic update system for non-updatable kernel, named DUNK. The DUNK provides: 1) a dynamic update mechanism at function-level granularity to overcome the reboot disruption and 2) a safety verification mechanism to overcome the distrust problem, named MAFIA. In this paper, we describe the design of DUNK and detailed algorithm of MAFIA.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.11
• /
• pp.1064-1070
• /
• 2012

This paper analyzes the pitting's cause of elevator's worm gear type traction machine. To find a cause of pitting problem, we analyzed vibration, a proper design allowance and lubrication. We brought a conclusion that the cause of pitting is not a simple vibration problem, such as misalignment of worm reducer and rail, but mostly related to a designed allowance. In this case, the allowance is tight. In general, the allowance of traction machine and lubrication is varied by manufacturers. When the allowance is tight, a proper lubrication can diminish the pitting problem.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.4
• /
• pp.155-170
• /
• 2004

Among the semiconductor If-chips, unlike memory chips, a majority of Application Specific IC(ASIC) products are produced by customer orders, and meeting the customer specified due date is a critical issue for the case. However, to the one who understands the nature of semiconductor manufacturing, it does not take much effort to realize the difficulty of meeting the given specific production due dates. Due to its multi-layered feature of products, to be completed, a semiconductor product(called device) enters into the fabrication manufacturing process(FAB) repeatedly as many times as the number of the product specified layers, and fabrication processes of individual layers are composed with similar but not identical unit processes. The unit process called photo-lithography is the only process where every layer must pass through. This re-entrant feature of FAB makes predicting and planning of due date of an ordered batch of devices difficult. Parallel machines problem in the photo process, which is bottleneck process, is solved with restricted roll out algorithm. Roll out algorithm is a method of solving the problem by embedding it within a dynamic programming framework. Restricted roll out algorithm Is roll out algorithm that restricted alternative states to decrease the solving time and improve the result. Results of simulation test in condition as same as real FAB facilities show the effectiveness of the developed algorithm.