• Steel and Composite Structures
• /
• v.49 no.1
• /
• pp.81-89
• /
• 2023

A simplified calculation method of natural vibration characteristics of high-speed railway multi-span bridge-longitudinal ballastless track system is proposed. The rail, track slab, base slab, main beam, bearing, pier, cap and pile foundation are taken into account, and the multi-span longitudinal ballastless track-beam-bearing-pier-cap-pile foundation integrated model (MBTIM) is established. The energy equation of each component of the MBTIM based on Timoshenko beam theory is constructed. Using the improved Fourier series, and the Rayleigh-Ritz method and Hamilton principle are combined to obtain the extremum of the total energy function. The simplified calculation formula of the natural vibration frequency of the MBTIM under the influence of vertical and longitudinal vibration is derived and verified by numerical methods. The influence law of the natural vibration frequency of the MBTIM is analyzed considering and not considering the participation of each component of the MBTIM, the damage of the track interlayer component and the stiffness change of each layer component. The results show that the error between the calculation results of the formula and the numerical method in this paper is less than 3%, which verifies the correctness of the method in this paper. The high-order frequency of the MBTIM is significantly affected considering the track, bridge pier, pile soil and pile cap, while considering the influence of pile cap on the low-order and high-order frequency of the MBTIM is large. The influence of component damage such as void beneath slab, mortar debonding and fastener failure on each order frequency of the MBTIM is basically the same, and the influence of component damage less than 10m on the first fourteen order frequency of the MBTIM is small. The bending stiffness of track slab and rail has no obvious influence on the natural frequency of the MBTIM, and the bending stiffness of main beam has influence on the natural frequency of the MBTIM. The bending stiffness of pier and base slab only has obvious influence on the high-order frequency of the MBTIM. The natural vibration characteristics of the MBTIM play an important guiding role in the safety analysis of high-speed train running, the damage detection of track-bridge structure and the seismic design of railway bridge.

• Journal of Venture Innovation
• /
• v.5 no.2
• /
• pp.85-99
• /
• 2022

Dryers becoming commercially available for experimental and industrial use are classified to general drying oven, hot-air dryer, vacuum dryer, freezing dryer, etc. and kinds of them are various from the function, size and volume, etc. But the moisture measurement is not applied although it is important factor for the quality control and the performance improvement of products, and then now is very passive because the weight is weighed arbitrarily after dry-end. Generally the method for measuring moisture is divided by a direct measurement method and a indirect measurement method, and the former such as the change of weight or volume on the front and rear of separation of moisture, etc. is mainly used. Relatively a indirect measurement is very limited to apply due to utilize measurement apparatuses using temperature conductivity and micro-wave etc. In this research, we easily designed the moisture measurement system using the open-source based Arduino, and monitored moisture fluctuations and weight profiles in the real-time without the effect of external environment. Concretely the temperature-humidity and load cell sensors were packaged into a drying oven and the various change values were measured, and their sensors capable to operate 60℃ and 80℃ were selected to suitable for the moisture sensitive materials and the food dry. And also the performance safety using the organic samples of banana, pear, sawdust could be secured because the changes of evaporation rate as the dry time and temperature, and the measurement values of load cell appeared stable response characteristics through repeated experiments. Hereafter we judge that the reliability can be improved increasingly through the expansion of temperature-humidity range and the comparative analysis with CFD(Computational Fluid Dynamics) program.

• Journal of Service Research and Studies
• /
• v.14 no.1
• /
• pp.1-12
• /
• 2024

As the service robot market grows among the food technology industry, the quality of robot service that affects consumer behavioral intentions in the restaurant industry has become important. Serving robots, which are common in restaurants, reduce employee work through order and delivery, but because they do not respond to service failures, they increase customer dissatisfaction as well as increase employee work. In order to improve the quality of service beyond the simple function of receiving and serving orders, functions of recovery effort, fairness, empathy, responsiveness, and certainty of the process after service failure, such as serving employees, are also required. Accordingly, we assumed the type of failure of restaurant serving service as two internal and external factors, and developed a serving robot with a vocational ethics module to respond with a professional ethical attitude when the restaurant serving service fails. At this time, the expression and action of the serving robot were developed by adding a failure mode reflecting failure recovery efforts and empathy to the normal service mode. And by recruiting college students, we tested whether the service robot's response to two types of service failures had a significant effect on evaluating the robot. Participants responded that they were more uncomfortable with service failures caused by other customers' mistakes than robot mistakes, and that the serving robot's professional ethical empathy and response were appropriate. In addition, unlike the robot's favorability, the evaluation of the safety of the robot had a significant difference depending on whether or not a professional ethical empathy module was installed. A professional ethical empathy response module for natural service failure recovery using generative artificial intelligence should be developed and mounted, and the domestic serving robot industry and market are expected to grow more rapidly if the Korean serving robot certification system is introduced.

• Journal of Korean Medicine Rehabilitation
• /
• v.19 no.2
• /
• pp.125-156
• /
• 2009

Objectives : To research the trend of studies related to rheumatoid arthritis and to indicate the hereafter direction for its study in oriental medicine and its treatment. Methods : I reviewed 75 domestic oriental medical journals, and 50 medical journals about rheumatoid arthritis published after 2004, and comparative analysis was made. And these theses were classified by college, year, field of study, subject. Results : The following are the results of this study. 1. Classified by oriental medical college, Dae-jeon college published the most theses, followed by Dong-guk, Kyung-hee, Se-myung and Dong-shin college. Han-yang college published the most theses among college of medicine. 2. Classified by type of thesis, experimental theses(70 pieces, 94%) showed higher rate than that of clinical theses(4 pieces, 5%) in oriental medical studies. However, in medical studies, clinical theses(34 pieces, 68%) showed higher rate than that of experimental theses(15 pieces, 30%). 3. Analyzed by subject, the most dealt subject in oriental medicine was herb medication, followed by herbal acupuncture, single herb, electroacupuncture, sasang & gene, acupuncture & moxibustion, complex accordingly. The most dealt subject in medical clinical journals was standards of diagnosis & prognosis, followed by medication, gene analysis, pathogenesis, clinical pattern, operative treatment and complication accordingly. 4. In theses related to herb medication, most of the subject was to evaluate anti-inflammatory and immunoregulatory effects of herb medication with geopungseup, jibitong, hwalhyeolgeoer function. The tendency of experimental methods was focusing on understanding anti-inflammatory and immunoregulatory mechanisms through molecular biologic methods by analyzing cytokine and gene. 5. Most of theses related to herbal acupuncture were experimental studies verifying ant-inflammatory and immnoregulatory effects through methods observing change of cytokine and immunoregulatory factors. Regarding remedies for herbal acupuncture, Ulmus davidiana Planch was most preferred, followed by bee venom. 6. In theses related to single herb, Boik-yak was most prefered, followed by Geopungseup-yak and Hwalhyeolgeoer-yak. Regarding methods of research, there were tendency of shifting from methods verifying travail, anti-inflammatory and anti-pyretic effects through a test of behavior, morphometry, serology and temperature measurement of the rectum and the skin into verifying anti-inflammatory and immunoregulatory effects through observing inflammatory cytokine in the joint and cells of spleen. 7. In theses related to electroacupuncture, ST36 and adjuvant were most preferred as acupoints and induced factor. The tendency of experimental methods was turning from verifying mechanism of travail effect to analyzing inflammation and pain inducing factors. 8. Diverse medical clinical studies were published. Subjects such as diagnosis and prognosis, medication, gene analysis, clinical pattern, operational treatment, complication and pathogenesis were published. Especially, studies about standards of early diagnosis, and research on possible parallel medications with methotrexate were actively inquired. 9. Most of theses related to medical experimental studies was about mediators and receptors related to inflammatory induction and osteoclasia mechanism. Also, it was presented blockage of them can be effective on rheumatoid arthritis. Conclusions : The oriental medicine studies have merit in its diversity of treatment, but it clinical studies is lacking compared to experimental studies. Also, more diversity of subjects is necessary. Therefore, complementary measures are needed. Hereafter, oriental medicine research about rheumatoid arthritis needs more clinical research verifying the effectiveness and safety in clinical field. Also, we require oriental medical standard of diagnosis and researches on pathological generation which would make early checkup and prognosis possible.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.403-425
• /
• 2015

The Chicago Convention and Annexes have become the basis of aviation safety regulations for every contracting state. Generally, the State's aviation safety regulations refer to the Standards and Recommended Practices(SARPs) provided in the Annexes of the Chicago Convention. In order to properly reflect international aviation safety regulations, constant studies of the aviation fields are of paramount importance. This Paper is intended to identify the main differences between korean and foreign regulation and suggest a few amendment proposals on Mixed-fleet Flying(at or more two aircraft type operation) of flight crew. Comparing with these regulations, the korean regulations and implementations have some insufficiency points. I suggest some amendment proposals of korean regulations concerning Mixed-fleet Flying that flight crew operate aircraft of different types. Basically an operator shall not assign a pilot-in-command or a co-pilot to operate at the flight controls of a type of airplane during take-off and landing unless that pilot has operated the flight controls during at least three take-offs and landings within the preceding 90 days on the same type of airplane or in a flight simulator. Also, flight crew members are familiarized with the significant differences in equipment and/or procedures between concurrently operated types. An operator shall ensure that piloting technique and the ability to execute emergency procedures is checked in such a way as to demonstrate the pilot's competence on each type or variant of a type of airplane. Proficiency check shall be performed periodically. When an operator schedules flight crew on different types of airplanes with similar characteristics in terms of operating procedures, systems and handling, the State shall decide the requirements for each type of airplane can be combined. In conclusion, it is necessary for flight crew members to remain concurrently qualified to operate multiple types. The operator shall have a program to include, as a minimum, required differences training between types and qualification to maintain currency on each type. If the Operator utilizes flight crew members to concurrently operate aircraft of different types, the operator shall have qualification processes approved or accepted by the State. If applicable, the qualification curriculum as defined in the operator's Advanced Qualification Program could be applied. Flight crew members are familiarized with the significant differences in equipment and/or procedures between concurrently operated types. The difference among different types of airpcrafts decrease and standards for these airpcrafts can be applied increasingly because function and performance have been improved by aircraft manufacture company in accordance to basic aircraft system in terms of developing new aircrafts for flight standard procedure and safety of flight. Also, it becomes more necessary for flight crews to control multi aircraft types due to various aviation business and activation of leisure business. Nevertheless, in terms of flight crew training and qualification program, there are no regulations in Korea to be applied to new aircraft types differently in accordance with different levels. In addition, it has no choice different programs based on different levels because there are not provisions to restrict or limit and specific standards to operate at or more than two aircraft types for flight safety. Therefore the aviation authority introduce Flight Standardization and/or Operational Evaluation Board in order to analysis differences among aircraft types. In addition to that, the aviation authority should also improve standard flight evaluation and qualification system among different aircraft types for flight crews to apply reasonable training and qualification efficiently. For all the issue mentioned above, I have studied the ICAO SARPs and some state's regulation concerning operating aircraft of different types(Mixed-fleet flying), and suggested some proposals on the different aircraft type operation as an example of comprehensive problem solving. I hope that this paper is 1) to help understanding about the international issue, 2) to help the improvement of korean aviation regulations, 3) to help compliance with international standards and to contribute to the promotion of aviation safety, in addition.

• Journal of Food Hygiene and Safety
• /
• v.21 no.2
• /
• pp.118-128
• /
• 2006

This study was conducted to determination of the endocrine distruptor function of 'Parabens' by dosing ethyl paraben, propyl paraben, isopropyl paraben, butyl paraben and isobutyl paraben to the immature SD rats. 18 groups were given vehicle control group, negative control group (Dibutyl phthalate), postive control group ($1'7-{\alpha}$ Ethynylestrdiol) and each paraben groups involved 3 dose level. Rats were injected with 62.5, 250 and 1,000mg/kg from postnatal day 19 till 21 once a day in subcutaneous and a total 3, times. There was no treatment related death. but, subcutaneous nodule, edema, alopecia and scrub formation on injection site was observed. These signs was become worse in high dose level. these signs was cause from physical stimulation by test substance which parabens were mix with com oil as vehicle. In the analysis of organ weights, absolute and relative weights of brain, spleen, liver, thymus, heart, kidneys, adrenals, ovaries and vagina were no difference with control group. but, wet and blotted weight of uterus was increased in every high dose parabens treat group. Especially, all dose level of isobutyl paraben was showed increment of uterus weight. uterus dilatation of parabens treated group was observed in gross anatomic pathology and these result was agree with wet and blotted weight of uterus. In the result of this study, estrogenic effect as endocrine distruptor was observed in ethyl paraben, propyl paraben, isopropyl paraben, butyl paraben and isobutyl paraben. and it was considered isobutyl paraben has highest estrogrnic effect under the condition of this study.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.4
• /
• pp.1811-1815
• /
• 2014

Background: In clinical trials with no upper age limit, the proportion of older patients is usually small, probably reflecting the more conservative approach adopted by clinicians when treating the elderly. An exploratory analysis of elderly patients in the RECORD-1 Trial showed that patients ${\geq}$ 65 y.o. had superior median PFS than overall RECORD-1 population (5.4 months and 4.9 months, respectively). We investigated the efficacy, relative benefit and safety of Everolimus (EVE) as sequential therapy after failure of VEGFr-TKI therapy for older patients with metastatic renal cell cancer (mRCC), in daily practice. Materials and Methods: 172 consecutive IRB approved patients with mRCC (median age 65, M:F 135/37, 78% clear cell) who received salvage EVE at 39 tertiary institutions between October 2009 and August 2011 were included in this analysis. Some 31% had progressed on sunitinib, 22% on sorafenib, 1% on axitinib, 41% on sequential therapy, and 5% had received other therapy. Patients with brain metastases were not included and 95% of the patients had a ECOG (Eastern Cooperative Oncology Group) performance status (PS) of 0 or 1. Previous radiotherapy was an exclusion criterion, but prior chemotherapy was permitted. Adequate organ function and hematologic parameters were mandatory. EVE administration was approved by the institutional review board at each participating institution and signed informed consent was obtained from all patients. Results: Median time of the whole cohort to last follow-up was 3.5 months (range 0.4-15.2 months). Forty four percent were continuing to take EVE at last followup. There were 86 (50%) patients ${\geq}$ 65 y.o. and 86 (50%) <65 y.o. The percentage of patients who showed PR/SD was higher in the older group than in the younger one (5.9%/61.2% vs 1.2%/46.5%, respectively). Median survival of older patients was also significantly longer (3.5 +/- 0.31 vs 3.1 +/- 0.34, hazard ratio=0.45, CI; 0.255-0.802). Analysis using Cox regression model adjusted for gender, PS, number of metastases, site of metastases, histology, smoking history and age detected an association between age and PFS (p=0.011). The frequency of adverse events in elderly patients treated with EVE was no greater than that in younger patients, although such toxicity may have had a greater impact on their quality of life. Conclusions: Older patients should not generally be excluded from accepted therapies (mTOR inhibitors after failure of VEGFr-TKI therapy) for mRCC.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.3
• /
• pp.230-242
• /
• 2005

Background : Spirometry should be compared with the normal predictive values obtained from the same population using the same procedures, because different ethnicity and different procedures are known to influence the spirometry results. This study was performed to obtain the normal predictive values of the Forced Vital Capacity(FVC), Forced Expiratory Volume in 1 Second($FEV_1$), Forced Expiratory Volume in 6 Seconds($FEV_6$), and $FEV_1/FVC$ for a representative Korean population. Methods : Based on the 2000 Population Census of the National Statistical Office of Korea, stratified random sampling was carried out to obtain representative samples of the Korean population. This study was performed as a part of the National Health and Nutrition Survey of Korea in 2001. The lung function was measured using the standardized methods and protocols recommended by the American Thoracic Society. Among those 4,816 subjects who had performed spirometry performed, there was a total of 1,212 nonsmokers (206 males and 1,006 females) with no significant history of respiratory diseases and symptoms, with clear chest X-rays, and with no significant exposure to respiratory hazards subjects. Their residence and age distribution was representative of the whole nation. Mixed effect models were examined based on the Akaike's information criteria in statistical analysis, and those variables common to both genders were analyzed by regression analysis to obtain the final equations. Results : The variables affecting the normal predicted values of the FVC and $FEV_6$ for males and females were $age^2$, height, and weight. The variables affecting the normal predicted values of the $FEV_1$ for males and females were $age^2$, and height. The variables affecting the normal predicted values of the $FEV_1/FVC$ for male and female were age and height. Conclusion : The predicted values of the FVC and $FEV_1$ was higher in this study than in other Korean or foreign studies, even though the difference was < 10%. When compared with those predicted values for Caucasian populations, the study results were actually comparable or higher, which might be due to the stricter criteria of the normal population and the systemic quality controls applied to the whole study procedures together with the rapid physical growth of the younger generations in Korea.

• Journal of Wetlands Research
• /
• v.15 no.1
• /
• pp.149-157
• /
• 2013

The weirs built so far are mainly overflow type weirs overflowing to the upstream. Main advantages of overflow type weirs are, effective water resources management and easy design, construction and maintenance due to many accumulated studies. However, due to the special feature of the overflow type weir where water overflows through the upstream of the weir, the silt coming from the upstream is not discharged to the downstream of the weir. This increases the river bed and reduces the reservoir capacity, and as a result, the weir loses its function. A underflow type weir with a water gate has been implemented in order to solve such sediment deposit and weir maintenance problems. However due to the design problem of recently constructed underflow type weirs, the river bed of the downstream of a weir has been scoured. And this leds to a structural problem. In this study, the flow characteristics of overflow type weirs and underflow type weir, hydraulic jump length analysis depending on change of water depth and the amount of specific energy loss generated per unit length depending on a weir type have been compared and analyzed, for the effective design and management of the weirs. The experiment results show that, when identical upstream conditions of underflow type weir and an overflow type weir were maintained, the hydraulic jump length was up to twice longer with Fr(Froude number) 3.5 of the hydraulic jump length at the underflow type weir, and the hydraulic jump length gradually decreased as the downstream water depth increased. The comparative analysis result of the amount of specific energy loss generated per unit length showed that the amount of energy loss per unit length was twice higher for an overlfow type weir than a underflow type weir. Therefore, in case of a underflow type facility, an additional energy reduction facility is determined to be necessary for safety of water construction structures.