• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.4
• /
• pp.395-401
• /
• 2009

One of the key design factors for the ventilation and safety system at extra long tunnel is the airflow velocity induced by the natural ventilation force. Despite of the importance, it has not been widely studied due to the complicated influencing variables and the relationship among them is difficult to quantify. At this moment none of the countries in the world defines its specific value on verified ground. It is also the case in Korea. The recent worldwide disasters by tunnel fires and demands for better air quality inside tunnel by users require the optimization of the tunnel ventilation system. This indicates why the natural ventilation force is necessary to be thoroughly studied. This paper aims at predicting the natural ventilation force at a 11 km-long tunnel which is in the stage of detailed design and will be the longest vehicle tunnel in Korea. The concept of barometric barrier which can provide the maximum possible natural ventilation force generated by the topographic effect on the external wind is applied to estimate the effect of wind pressure and the chimney effect caused by the in and outside temperature difference is also analyzed.

• The Journal of Engineering Geology
• /
• v.23 no.1
• /
• pp.57-65
• /
• 2013

We developed a computer program (CDFlow v. 1.0) to design countermeasures against debris flows in natural terrain. The program can predict the probability of landslides occurring in natural terrain and can estimate the zone of damage caused by a debris flow. It can also be used to design the location and size of countermeasures against the debris flow. The program is run using the ArcGIS Engine, which is one of the most well-known Geographic Information System (GIS) tools for developers. The quasi-dynamic wetness index and the infinite slope stability equation were applied to predict landslide probability as a type of slope safety factor. The calculated safety factor was compared with the required safety factor, and areas of high probable potential for landslides were then selected and represented on the digital map. The volume of debris flow was estimated using these areas of high probable potential for landslides and soil depth. The accumulated volume of debris flow can be calculated along the flow channel. To assess the accuracy of the program, it was applied to a real landslide site at Deoksan-ri, Inje-gun, Kangwon-Province, where four debris barriers have been installed in the watershed of the site. The results of soil tests and a field survey indicate that the program has great potential for estimating probable landslide areas and the trajectory of debris flows. Calculation of the capacity volume of existing debris barriers revealed that they had insufficient capacity to store the calculated amount of debris flow. Therefore, this program enables a rational estimation of the optimal location and size of debris barriers.

• Journal of Food Hygiene and Safety
• /
• v.33 no.4
• /
• pp.229-239
• /
• 2018

Currently, in Korea, a dry food simulant has not been designated for the migration testing of paper and board, food contact materials (FCMs) being used in dry foods, and foods heated at ultra-high temperature. Considering the diverse usage of FCMs, in order to secure reliable and confident safety evaluation and to overcome the non-trade barrier tariff in worldwide trade, migration testing methods of what should be more clearly defined for securing and overcoming. This article delves into the available literature on the use of $Tenax^{(R)}$ as a simulant for dry foods as well as its suitability and limitations, and examines the feasibility of its introduction into Korean FCMs regulation. Most experimental studies using $Tenax^{(R)}$ showed overestimated migration values when used in real foods, which reflects the potential of $Tenax^{(R)}$ as a dry food simulant in a worst-case scenario. However, more studies are required to optimize migration testing using $Tenax^{(R)}$ by standardizing the solvent type and the extraction method for surrogates of various FCMs and foods, and to resolve the potential drawbacks in the use of $Tenax^{(R)}$.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.2
• /
• pp.155-169
• /
• 2007

A transport container for a 500 kCi tritium storage vessel was developed, which could be used for the transport of metal tritide from Wolsong TRF facility to a disposal site. The structural, thermal, shielding, and confinement analyses were performed for the container in a view of Type B. As a result of structural analysis, the developed container sustained its integrity under normal and accidental conditions. The maximum temperature increase of the inner storage vessel by radiation was evaluated at $134.8^{\circ}C at room temperature. In $800^{\circ}C$ fire test, The thermal barrier of container sustained the inner vessel at $405^{\circ}C after 30 min, which temperature was allowable for the container integrity since maximum design temperature of inner vessel was $550^{\circ}C. In the evaluation of the shielding, the activity of radiation was nearly zero on the outer surface of inner vessel. Consequently the transport container for a 500 kCi tritium was evaluated to pass all the safety tests including accidental condition, so it was concluded that the designed transport container is proper to be used.

• Journal of Food Hygiene and Safety
• /
• v.35 no.5
• /
• pp.495-502
• /
• 2020

Processing fresh produce into fresh-cut products increases the risk of bacterial growth and contamination by breaking the exterior barrier of produce. Our objective in this study was to develop predictive models of Listeria monocytogenes in the fresh-cut salad, fresh-cut pineapple, and frozen mango. Predictive growth and survival models were developed to predict the change of L. monocytogenes populations in the fresh-cut salad (4, 10, 12, 13, 17, 25, and 36℃), fresh-cut pineapple (4, 10, 17, 25, 30, and 36℃), and frozen mango (-2, -10 and -18℃) as a function of temperature. The growth of L. monocytogenes in fresh-cut salad and pineapple was observed at above 13℃ and 10℃, respectively. The growth of L. monocytogenes in pineapple was faster than in salad. The delta value of L. monocytogenes in frozen mango increased as the storage temperature decreased. The results indicate that L. monocytogenes behave differently according to the physicochemical properties of fresh-cut fruits and vegetables. Since L. monocytogenes grow and survive well in refrigerated and frozen conditions, management programs and preventive controls for the processing of fresh-cut produce should be effectively implemented to enhance the safety of fresh-cut fruits and vegetables at retail markets.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.5
• /
• pp.550-559
• /
• 2019

The sinking of the M/V SEWOL in April 2014 was not a mere marine accident, but a marine catastrophe. This grim case developed into a social tragedy that impinged the national sentiment and communal integrity. It is imperative that thorough provisions and measures be outlined at the national level with regard to massive marine accidents, oil pollution, and natural disasters that might critically affect government affairs. Pivoting on "The Black Swan Theory," a concept of improperly rationalizing a national crisis based on uncertainties, this research assesses a variety of response strategies that minimize the national economic and social damage caused by a large-scale marine disaster. Along with the effort of minimizing any potential defects in each protective barrier, the "Black Swan Detection System of the Marine Disaster" needs to be incorporated to prevent cases wherein such defects lead to an actual crisis. Maritime safety must be systematically unified under a supervisory organization, and a structure for maritime crisis on-scene command and cooperation must likewise be established in order that every force on the scene of a marine disaster may act effectively and consistently under the direction of an on-scene commander.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1540-1554
• /
• 2023

To use nuclear energy sustainably, spent nuclear fuel, classified as high-level radioactive waste and inevitably discharged after electricity generation by nuclear power plants, must be managed safely and isolated from the human environment. In Korea, the land area is limited and the amount of high-level radioactive waste, including spent nuclear fuels to be disposed, is relatively large. Thus, it is particularly necessary to maximize disposal efficiency. In this study, a high-efficiency deep geological repository concept was developed to enhance disposal efficiency. To this end, design strategies and requirements for a high-efficiency deep geological repository system were established, and engineered barrier modules with a disposal canister for pressurized water reactor (PWR)-type and pressurized heavy water reactor type Canada deuterium uranium (CANDU) plants were developed. Thermal and structural stability assessments were conducted for the repository system; it was confirmed that the system was suitable for the established strategies and requirements. In addition, the results of the nuclear safety assessment showed that the radiological safety of the new system met the Korean safety standards for disposal of high-level radioactive waste in terms of radiological dose. To evaluate disposal efficiency in terms of the disposal area, the layout of the developed disposal areas was assessed in terms of thermal limits. The estimated disposal areas were 2.51 km² and 1.82 km² (existing repository system: 4.57 km²) and the excavated host rock volumes were 2.7 Mm³ and 2.0 Mm³ (existing repository system: 4.5 Mm³) for thermal limits of 100 ℃ and 130 ℃, respectively. These results indicated that the area and the excavated volume of the new repository system were reduced by 40-60% compared to the existing repository system. In addition, methods to further improve the efficiency were derived for the disposal area for deep geological disposal of spent nuclear fuel. The results of this study are expected to be useful in establishing a national high-level radioactive waste management policy, and for the design of a commercial deep geological repository system for spent nuclear fuels.

• Animal Bioscience
• /
• v.35 no.9
• /
• pp.1434-1443
• /
• 2022

Objective: This study was designed to investigate the hypothesis that dietary quercetin (QUE) and coated sodium butyrate (SB) supplementation alleviate oxidative stress in the small intestine of diquat (DIQ)-challenged pullets. Methods: A total of 200 13-week-old pullets were divided into four groups: the control group (CON), the DIQ group, the QUE group, and the coated SB group, and injected intraperitoneally with either saline (CON) or diquat (DIQ, QUE, and SB) to induce oxidative stress on day 0. Results: On the first day, the malondialdehyde and superoxide dismutase (SOD) concentrations in the SB group were significantly different from those in the DIQ and QUE groups (p<0.05), and dietary supplementation with SB increased serum glutathione peroxidase (GSH-PX) levels compared with the DIQ group (p<0.05). Quercetin and SB increased the levels of CLAUDIN-1 and zonula occludens-1 (ZO-1) in the jejunum. On the tenth day of treatment, QUE attenuated the decrease in GSH-PX levels compared to those of the CON group (p<0.05), while SB increased SOD, GSH-PX, and total antioxidant capacity levels compared to those of the DIQ group. Nuclear factor erythroid 2-related factor 2 (NRF2) and heme oxygenase-1 (HO-1) mRNA levels in the QUE and SB groups increased (p<0.05) and CLAUDIN-1 mRNA levels in the QUE and SB groups were upregulated compared to those in the DIQ group ileum tissue. Conclusion: Supplementation of QUE and SB demonstrated the ability to relieve oxidative stress in pullets post DIQ-injection with a time-dependent manner and QUE and SB may be potential antioxidant additives for relieving oxidative stress and protecting the intestinal barrier of pullets.

• Korean Journal of Agricultural Science
• /
• v.43 no.1
• /
• pp.14-20
• /
• 2016

One of the most powerful health management practices is the use of antibiotics, but their use is being restricted because of health safety issues. The swine industry has been looking for various alternatives to antibiotics and increasingly considers the use of dietary factors like feed ingredients, feed additives, feed formulation practices, or feeding methods, instead of using antibiotics to improve pig health and performance. Among other alternatives to antibiotics, spray-dried plasma may be a candidate. Spray-dried plasma is a blood product that provides bioavailable nutrients and physiologically active components such as immunoglobulins, glycoproteins, growth factors, peptides, etc. It is an excellent protein source with balanced and highly digestible amino acids. Several beneficial physiological activities depend on components of spray-dried plasma, such as immune competence (antibacterial activity), modulation of microbiota and/or immune system, integrity of intestinal barrier function, etc. These beneficial effects can contribute to improvement of pig performance and health by modulation of microbiota in the digestive tract and/or immune system. Therefore, it is suggested that spray-dried plasma has great potential as an antibiotics alternative.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.1
• /
• pp.65-71
• /
• 2016

In recent years, 3D printing has received increasing attention due to releases of low-cost 3D printers based on open-source platform. 3D printing is expected to reduce the barrier to entry in the traditional manufacturing processes by increasing flexibility and creating an advantage to manufacture customized products at low costs. In this study, a unique eyeglass frame was designed to have a snake shape, which has an asymmetric geometry unlike traditional frames. The eyeglass frame was designed in a customized manner by reflecting dimensional characteristics of a customer's face. Finite element analysis was performed to investigate the structural safety of the 3D printed frames during the assembly process. The analysis also considered the effect of anisotropic material properties as determined by tensile tests. The eyeglass frame was then printed using the customized sizes and the best building process. The eyeglass frame was successfully assembled with lenses and without structural failure during its assembly procedure.