• Ocean Systems Engineering
• /
• 제6권2호
• /
• pp.143-159
• /
• 2016

Cargo, such as a Tension Leg Platform (TLP), Semi-submersible platform (Semi), Spar or a circular Floating Production Storage and Offloading (FPSO), are frequently dry-transported on a Heavy Lift Vessel (HLV) from the point of construction to the point of installation. The voyage can span months and the overhanging portions of the hull can be subject to frequent wave slamming events in rough weather. Tie-downs or sea-fastening are usually provided to ensure the safety of the cargo during the voyage and to keep the extreme responses of the cargo, primarily for the installed equipment and facilities, within the design limits. The proper design of the tie-down is dependent on the accurate prediction of the wave slamming loads the cargo will experience during the voyage. This is a difficult task and model testing is a widely accepted and adopted method to obtain reliable sea-fastening loads and extreme accelerations. However, it is crucial to realize the difference in the inherent stiffness of the instrument that is used to measure the tri-axial sea fastening loads and the prototype design of the tie-downs. It is practically not possible to scale the tri-axial load measuring instrument stiffness to reflect the real tie-down stiffness during tests. A correlation method is required to systematically and consistently account for the stiffness differences and correct the measured results. Direct application of the measured load tends to be conservative and lead to over-design that can reflect on the overall cost and schedule of the project. The objective here is to employ the established correlation method to provide proper high-frequency responses to topsides and hull design teams. In addition, guidance for optimizing tie-down design to avoid damage to the installed equipment, facilities and structural members can be provided.

• Journal of Preventive Medicine and Public Health
• /
• 제22권1호
• /
• pp.102-115
• /
• 1989

The purpose of this study was to find out morbidity rate and utilization pattern of medical services of sailors on a voyage. The subjects of this study were 470 sailors who are sailors' trainee and safety-trainee for embarkation in a ship. Data were collected by means of personal survey conducted from September 5 to October 30, 1988. The subjects were sailed 12.6 months on the average. During the voyage, 49.4% of the sailors had sickness more than once, and 24.7% was unable to work more than a day because of illness. The average monthly morbidity rate was 85.7 per 1,000 and the monthly prevalence rate of disease that was unable to work more than a day was 21.2 per 1,000. The sailors of 40-49 years old had the highest morbidity rate of 103.6 per 1,000/month. The number of days activity restricted due to sickness was 93.4 days per 1,000 persons, and the average duration of illness was 11.2 days per sickness. The proportion of treatment days to sickness days was 48.8%. Considering morbidity unable to work more than a day, the number of those who had traumatic injury were 17.2%, which revealed the highest rate, influenza or cold were 15.5%, and the digestive disease 11.2%. Less than half(42.1%) of patients were treated with medicine kept in the cabin. However, 2.1% was transferred by helicopter and 29.5% was treated at hospitals or clinics in nearby port. In the cabin, 67.4% of patients was cured completely.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제14권11호
• /
• pp.5442-5447
• /
• 2013

This paper focuses on development of SCAAM(Ship Collision Avoidance Assignment Model) for avoiding ship collison at sea. We take a new look at DCPA, TCPA, VCD, collision concept for ship collision avoidance and propose SCAAM using DCPA pre-assignmented by a ship master on information collected by other ship's AIS, GPS (course-speed, destination, length, width, tonnage etc). If A ship is a collision situation, the ship master makes a decision where the ship makes a evasion voyage or not continually using SCCAM. If ship master decides a evasion voyage, the ship is voyaged by CORLEGS (International Regulations for Preventing Collisions at Sea). This paper contributes to safety navigation by decreasing the ship collision accident by human's error.

• Proceedings of KOSOMES biannual meeting
• /
• 해양환경안전학회 2007년도 춘계학술발표회
• /
• pp.203-210
• /
• 2007

This paper treats optimal route safety assessment system at seaway based on weather forecasting data through INMARSAT. Since early times, captain have been sailing to select the optimum route considering the weather, ship loading status condition and operational scheduling empirically. However, it is rare to find digitalized onboard route support system whereas weather facsimile or wave and swell chart are utilized for the officer, based on captain's experience. In this paper, optimal route safety assessment system which is composed of voyage efficiency and safety component is introduced. Optimum route minimized ETA(estimated time of arrival) and fuel consumption that shipping company. and captain are requiring to evaluate for efficient voyage considering speed loss and power increase based on wave added resistance of ship. In the view point of safety, seakeeping prediction is performed based on 3 dimensional panel method Basically, the weather forecast is assumed to be prepared previously in order to operate this system.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• 제23권3호
• /
• pp.515-530
• /
• 2013

The results of investigations into marine incidents have become an important basis in determining not only possible causes, but also the extent of negligence between the perpetrator and victim. However, marine incidents occur under special circumstances i.e. the marine environment, and this leads to difficulties in identifying causes due to problems in scene preservation, reenactment and acquisition of witnesses. Given the aforementioned characteristic of marine incidents, the International Convention for the Safety of Life at Sea (SOLAS) has adopted mandatory regulations on the carriage of Voyage Data Recorders (VDRs) and Automatic Identification Systems (AIS) for ships of a certain gross tonnage and upwards, so as to reflect recent developments in radio communication and marine technology. Adopted to provide an international standard for investigations and to promote cooperation, the Code of the International Standards and Recommended Practices for a Safety Investigation into a Marine Casualty or Marine Incident (Casualty Investigation Code) recommends member states to build capacity for analysis of VDR data. Against this backdrop, this paper presents methods for efficient investigations into the causes behind marine incidents based on data analysis of VDR, which serves as the black box of ships, as well as digital forensic techniques.

• Journal of Navigation and Port Research
• /
• 제38권6호
• /
• pp.577-583
• /
• 2014

A ship-to-ship (STS) lightering operation takes place in order to transfer cargo (e.g. crude oil or petroleum products) between an ocean-going ship and a service ship alongside it. Instrumental measurements to accurately determine the relative speeds and distances during the approach between the vessels would benefit the operational safety and efficiency. A velocity information GPS (VI-GPS) system, which uses the instantaneous velocity measures from carrier-phase Doppler measurement, has been applied in a field observation onboard a service ship (Aframax tanker) approaching a ship-to-be-lightered (VLCC) in open waters. This article proposes to apply VI-GPS as the input sensor to a guidance and decision-support system aiming to provide accurate velocity information to the officer in charge of an STS operation. A method for precise velocity measurement using VI-GPS was described and the measurement results were compared each other with the results of Voyage Data Recorder (VDR) and VI-GPS that showed the concept of a guidance and decision-support system applying VI-GPS with the field test results during STS operations. Also, it turned out that VI-GPS has sufficient accuracy to serve as an input sensor from the field test results.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.62-67
• /
• 2004

Many ships in voyage experience weight and buoyancy distribution change by various reasons such as change of sea water density and waves, weather condition, and consumption of fuel, provisions, etc . The weight and buoyancy distribution change can bring the ships out of allowable trim, heeling angle. In these case, the ships should adjust trim and heeling angle by shifting of liquid cargo or ballasting, deballasting of ballast tanks for recovery of initial state or for a stable voyage. But, if the adjustment is performed incorrectly, ship's safety such as longitudinal strength, intact stability, propeller immersion, wide visibility, minimum forward draft cannot be secured correctly. So it is required that the adjustment of trim and heeling angle should be planned not by human operators but by optimization computer algorithm. To make an optimized plan to adjust trim and heeling angle guaranteeing the ship's safety and quickness of process, Uk! combined mechanical analysis and optimization algorithm. The candidate algorithms for the study were heuristic algorithm, meta-heuristic algorithm and uninformed searching algorithm. These are widely used in various kinds of optimization problems. Among them, heuristic algorithm $A^\ast$ was chosen for its optimality. The $A^\ast$ algorithm is then applied for the study. Three core elements of $A^\ast$ Algorithm consists of node, operator, evaluation function were modified and redefined. And we analyzed the $A^\ast$ algorithm by considering cooperation with loading instrument installed in most ships. Finally, the algorithm has been applied to tanker ship's various conditions such as Normal Ballast Condition, Homo Design Condition, Alternate Loading Condition, Also the test results are compared and discussed to confirm the efficiency and the usefulness of the methodology developed the system.

• Journal of Navigation and Port Research
• /
• 제44권5호
• /
• pp.375-381
• /
• 2020

The IMO has established a regulation for the ECDIS installation on ships based on the IHO S-57 standards. The ECDIS supports sailors in achieving a safe voyage by using ENCs and monitoring the information of their ship. However, the S-57 standards were developed as edition 3.1 and prohibited revision for more than 20 years. So, the IHO developed a new standard as S-100 into the hydrography and maritime field instead of updating the S-57 to edition 4.0. In this study, the new S-100 ECDIS was developed and verified with ENCs and the digital maritime safety information by using a ship steering simulator and by conducting an on-board sea-trial test. It evaluated the impact on ship operations if the next-generation navigation support system is introduced. Based on this research, the S-100 ECDIS will generate improvements such as safe voyages by providing various of real-time safety information and up-to-date data to ship and sailors.

• Proceedings of KOSOMES biannual meeting
• /
• 해양환경안전학회 2003년도 춘계학술발표회
• /
• pp.31-40
• /
• 2003

There are winds and waves in the sea, and they are changed frequently in accordance with the weather. By analyzing them which have the closest relation to the ship's safe voyage. evaluating the seakeeping performance and then taking a proper action, navigators should carry out safe navigation on the sea. A ship in seaways suffers continuous disturbances by irregular waves, and ship motions with irregular waves cannot be easily described as a system model which is adequate to a control system. But, in general, for seakeeping analysis, ship motions in irregular seas can be estimated by the superposition of the motion responses in regular wave components of the sea spectrum. After comparing and analyzing the winds and waves in major sea areas, this paper evaluates the navigational safety of ships on the Korean coast with potential dangerous seakeeping performance using the weather information provided by land. The conclusion is as follows : (1) It is possible that the safety of ships could be secured more accurately by evaluating the seakeeping performance of ships. (2) When the weather is bad, the departure of ships could be controlled by evaluating the navigational safety of ships. (3) When a ship is placed in commission in any area, this evaluation could be used to decide the type and size of ship in use.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제8권2호
• /
• pp.79-86
• /
• 2002

A heating cargo is solidified by several reasons during carriage. This study is to analyse a cargo accident which 811,202 US barrels of Nile Blend crude oil reamined solid In the tanks after discharge. There are some possibilities that low temperature of Beading cargo below cloud point and wax appearance temperature at loading time, heating interruption during voyage or discharging, and prohibition of crude oil washing during discharging might influence the cargo solidified. But we concluded that the defect of heating system would most affect the heating cargo solidified locally, and which blocked drain hole of bottom transverse and web frame and they obstruct flow of heating cargo in the tanks.