• 전기학회논문지P
• /
• 제58권4호
• /
• pp.597-601
• /
• 2009

Green car such as a hybrid electrical vehicle and fuel cell vehicle is developed as a commercial target. UN/ECE/WP29 is developing GTR of HFCV and establishing the regulation and standard of electrical safety by ELSA. The regulation and standard about Electrical safety of vehicle are prescribed in ISO, UN/ECE, FMVSS, Japanese Attachment and so on, in case of insulation resistance is referred to keep more than 100/Vdc, 500/Vac. However, accurate method to measure insulation resistance agreeable to structure of vehicle does not exist now, it is actually that correctness of measurement drops according to the feature of battery and fuel cell stack. In this paper, the method to measure insulation resistance for protection against electrical shock by direct contact or indirect contact in Green Car will be indicated by making a comparison between the insulation measurement in standard of electrical safety and the experiment results for HEV and HFCV.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1253-1258
• /
• 2004

The system safety must be ensured before customization. There was no specific requirement representing system safety in Korea until now. So we should draw safety requirements to guarantee system safety for the first time. In this paper, the Preliminary Hazard Analysis (PHA) to derive the safety requirements on the train control system was carried out. To analyze hazard, we have to deduce system functions, identify related hazards, derive the effects of the hazards, analyze current risks, define the target risks of the system, and deduce the alternative plans to reduce the effects of the hazards. For the case study, the detailed analysis on vehicle collision that was a main hazard of the train control system was carried out.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.871-876
• /
• 2010

When surface Concrete Face Rock fill Dam constructs than existent center core type rock fill dam, it is much prevalent form in domestic these day by quality control of that is profitable and weather condition etc. of coreZone. C.F.R.D is less research about seismic survey(Refractional Seismic Prospectin, Resistivity Prospecting) of levee body than fill dam. Thus as C.F.R.D seismic survey is less, safety of that consist is short most development flue is high reason. That is not checking target of minuteness safety diagnosis and so on by short operation period. Wish to analyze inquiry incidental and difference with center core type dam and acquire C.F.R.D preservation administration upper necessary inquiry condition forward hereafter.

• 건설안전기술
• /
• 통권55호
• /
• pp.10-17
• /
• 2012

Aging society may approached to our society during snatch very, and enter in super aging society for more span. Investment that we which live 21th century are many in people's quality of life elevation meantime did not consist, but stand in visual point that must improve many portions forward. For front, repletions for many equipments that consider aged on our society must consist, and much researches may have to be gone for this. According to traffic accident result, percentage of older pedestrian deaths was 46.5% as much in Korea. In particular, the crossing accidents by 59% or more of the older pedestrian traffic safety measures that target is an urgent situation. Therefore, in this study was to identify the domestic status and problem on no-sidewalk region for older pedestrians. In addition, side walk the installation and maintenance plan presented to prepare for aging society.

• Journal of Biosystems Engineering
• /
• 제42권3호
• /
• pp.170-189
• /
• 2017

Purpose: This paper presents Raman chemical imaging technology for inspecting food and agricultural products. Methods The paper puts emphasis on introducing and demonstrating Raman imaging techniques for practical uses in food analysis. Results & Conclusions: The main topics include Raman scattering principles, Raman spectroscopy measurement techniques (e.g., backscattering Raman spectroscopy, transmission Raman spectroscopy, and spatially offset Raman spectroscopy), Raman image acquisition methods (i.e., point-scan, line-scan, and area-scan methods), Raman imaging instruments (e.g., excitation sources, wavelength separation devices, detectors, imaging systems, and calibration methods), and Raman image processing and analysis techniques (e.g., fluorescence correction, mixture analysis, target identification, spatial mapping, and quantitative analysis). Raman chemical imaging applications for food safety and quality evaluation are also reviewed.

• 한국안전학회지
• /
• 제27권3호
• /
• pp.176-181
• /
• 2012

In this research the 2009 spring occurred during forest fire ImSil and research destination GyeongJu has been selected. Research in the field of the target time exploratory Boundary Data through after air photos, satellite photos and topographic map by using the combustion area was calculated. 2009 March 1-forest fire occurs on the day of the weather information and weather changes wildfire in the check in any affected. Study research destination of combustion is ImSil 161 ha, GyeongJu 270.93 ha. The impact of the weather-temperature dry weather forest fires this favorable situation to occur and the wind directions and the spread of the mountain wind speed was less impact has no arguments.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 춘계학술대회
• /
• pp.515-517
• /
• 2013

거제도 산달도 연륙교 해상교량 설치에 앞서 해양사고 조사, 해상교통량 조사, 해상교통류 시뮬레이션 및 선박조종 시뮬레이션을 이용하여 해상교통의 안전 확보가 가능한지를 검토하기 위하여 해상교통안전진단을 실시하였다. 이번 진단 결과를 기초로 하여 진단면제 사업의 대상 및 진단대상 해역 등의 가이드라인 확보가 필요할 것으로 사료된다.

• 한국안전학회지
• /
• 제26권3호
• /
• pp.29-33
• /
• 2011

Experimental studies were performed to investigate the injury potential of BB pellets through gelatine based simulants. In order to record BB pellet movements penetrating into the target simulant, a high-speed video camera was used. In this study the first investigation involved the effects on concentrations, homogeneity and gelation times of the gelatine simulant. The second investigation involved the penetration depth of the pellets to the simulant by different distances between the BB gun and the simulant. The final one is associated with impact velocity, threshold velocity and penetration depth of the pellets by different kinetic energies of the BB gun. Results provided the basis in assessing the injury potential of BB pellets.

• Safety and Health at Work
• /
• 제4권1호
• /
• pp.63-70
• /
• 2013

Objectives: This study is planned to assess the trend of occupational injuries in Korea from 2001 to 2010. Methods: Ten years of occupational injuries, from 2001 to 2010, were analyzed in order to investigate the changing profiles according to the various characteristics of injuries; economic sectors, age of the injured, and type of injuries. The changing profile of occupational injuries was investigated by comparison with an index-created relative value based on the number of cases of reference category. Results: The fatalities of construction, forest, agriculture, and service show the increasing trend. The nonfatal occupational injuries of the manufacturing sector were higher than those of other sectors in every year but the fatal occupational injuries of construction workers were higher than those of the manufacturing sector. Occupational injuries occurring due to amputation and those of slip and trip increased. The number of occupational injuries for the worker groups of 24 years old and below decreased and 45 years old and above increased. In comparison to the figure of fall from height, the figures of slip and trip or caught in equipment are higher in every calendar year. Conclusion: This study find out construction, forest, agriculture, and service sectors, aged worker with 45 years old and over can be target population for the strategies of occupational safety.

• Safety and Health at Work
• /
• 제8권3호
• /
• pp.322-326
• /
• 2017

In 1992, the quality control program was introduced in Republic of Korea to improve the reliability of the work environment monitoring, which was introduced in the 1980s. The commission entrusted by the Ministry of Employment and Labor, the Occupational Safety and Health Research Institute has conducted the program for industrial hygiene laboratories including designated monitoring institutions and spontaneously participating agencies. The number of institutions that participated in the program has increased from 30 to 161. The initial conformance ratio in the participants was 43% (organic solvents) and 52% (metals). Thereafter, the conformance ratio increased rapidly and it has remained in a stable state at more than 89% since 1996. As subject materials, 13 kinds of organic solvents and 7 kinds of metals were used. To improve the capability of measurement and analysis of private institutions, educational courses were conducted annually. An assessment at the actual sites of participants was additionally introduced into the program in 2013. Thus, the program turned into a system that administrates the overall process of participants. For the future, the scope of target materials will be extended through additional items. Thus, the reliability of the results of the work environment monitoring is expected to increase accordingly.