• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제16권10호
• /
• pp.962-974
• /
• 2010

IT 기술은 최근 바이오 기술(BT), 나노 기술(NT) 풍의 다른 기술들과 융합하면서 새로운 패러다임을 창출하고 있다. 교통 분야에도 IT 기술과 융 복합하여 효과적인 교통 환경을 조성하는 지능형 교통 시스템(ITS)에 관한 연구가 활발히 진행되고 있다. 가변속도제한(VSL)은 ITS 연구의 한 분야로 현재 도로 상황에 알맞게 속도제한을 조절하여 도로의 안전성과 효율성을 증대하는 시스템이다. 기존에는 대부분 단일 스테이션에서의 VSL 알고리즘 연구에 중점을 두었다. 하지만 도시고속도로와 같이 다수의 스테이션이 일정한 간격으로 설치되어 있는 환경에 적용하기에는 미흡한 점이 있다. 본 논문에서는 다수의 스테이션들 사이의 연계를 통해 VSL로 얻을 수 있는 효과를 높이는 알고리즘을 제안한다. 제안하는 알고리즘은 30초 단위의 VSL 변화로 도로 상황에 빠르게 반용 할 수 있다. 알고리즘은 교통 혼잡을 유발하는 스테이션 검색 루틴과 교통 혼잡의 크기 산출 루틴, VSL 컨트롤 스테이션 개수 계산 루틴, VSL 계산 루틴의 총 4 단계로 구성된다. 제안하는 알고리즘용 도로의 안전성 향상과 차량 이동시간 변화량의 최소화를 목적으로 한다. 이동 시간을 고려하는 이유는 VSL의 도로 적용 시 운전자가 가장 민감하게 반응하는 부분이 이동시간의 변화이기 때문이다. 실험 평가를 위해 마이크로스코픽 시뮬레이터인 PTV사의 VISSIM 시뮬레이터를 사용한다. 실험 결과를 통해 제안하는 알고리즘이 도로의 안전성 향상에 기여하고 이동시간에 최소한의 영향을 미치는 것을 보인다.

• 대한원격탐사학회지
• /
• 제39권5_1호
• /
• pp.621-635
• /
• 2023

시설물 상태평가는 시설물의 사용성을 평가하고, 진단 주기를 결정하는 중요한 과정이다. 현재 수행되고 있는 인력 기반 방법은 안전, 효율, 객관성에 대한 문제를 안고 있어 이를 개선하기 위해 영상을 이용한 딥러닝(deep learning) 기반의 연구가 수행되고 있다. 그러나 시설물 손상 데이터는 발견하기 어려워 다량의 시설물 손상 학습 데이터를 구축하기 어렵고, 이는 딥러닝 기반 상태평가에 한계로 작용한다. 본 연구에서는 영상 기반 시설물 상태평가의 학습 데이터 부족으로 인한 어려움을 개선하기 위해 파운데이션 모델(foundation model) 기반 2-step 시설물 손상 분석을 제시한다. 시설물 상태평가의 요소를 객체화와 정량화로 세분화하고, 정량화 단계에서 영상 분할(segmentation) 파운데이션 모델을 적용하였다. 본 연구의 방법은 기존 영상 분할 방법 대비 10% 포인트 이상 높은 mean intersection over union을 나타냈고, 특히 철근 노출의 경우에는 40% 포인트 이상의 성능 개선을 보였다. 본 연구의 방법이 학습 데이터 구축이 어려운 도메인에 성능 개선을 가져올 것이라 기대한다.

• 해양환경안전학회지
• /
• 제23권3호
• /
• pp.258-265
• /
• 2017

This paper validates a system identification method using mathematical optimization using sea trial measurement data as a benchmark. A fast time simulation tool, SIMOPT, and a Rheinmetall Defence mathematical model have been adopted to conduct initial hydrodynamic coefficient estimation and simulate ship modelling. Calibration for the environmental effect of sea trial measurement and sensitivity analysis have been carried out to enable a simple and efficient optimization process. The optimization process consists of three steps, and each step controls different coefficients according to the corresponding manoeuvre. Optimization result of Step 1, an optimization for coefficient on x-axis, was similar compared to values applying an empirical regression formulae by Clarke and Norrbin, which is used for SIMOPT. Results of Steps 2 and 3, which are for linear coefficients and nonlinear coefficients, respectively, was differ from the calculation results of the method by Clarke and Norrbin. A comparison for ship trajectory of simulation results from the benchmark and optimization results indicated that the suggested stepwise optimization method enables a coefficient tuning in a mathematical way.

• 국제초고층학회논문집
• /
• 제6권3호
• /
• pp.279-284
• /
• 2017

The purpose of structural health monitoring is to evaluate structural behavior due to various external loads through installation of appropriate measurement. Accordingly, a guideline for monitoring standards is necessary to evaluate the safety and performance of a structure. This paper introduces preliminary design of SHM for high-rise buildings, which is the stage creating a guideline. As for preliminary design of SHM, first step is to calculate the displacement and member force through structural analysis. After that, limitations or qualifications are proposed for management. Secondly, based on the results from first step, issues related monitoring such as monitoring method, measurement type, or installation location are determined. This method leads building managers to reasonably define the structural safety over the whole life cycle. Furthermore, this experience contributes to development of SHM forward and it is expected to be useful for other types of structures as well such as spatial structures or irregular buildings.

• 한국안전학회지
• /
• 제30권4호
• /
• pp.56-63
• /
• 2015

Gas explosion accidents could cause a catastrophe. we need specialized and systematic accident investigation techniques to shed light on the cause and prevent similar accidents. In this study, we had performed LNG explosion simulation using AUTODYN which is the commercial explosion program and predicted the damage characteristics of the structures by LNG explosive power. In the first step, we could get LNG's physical and chemical explosion properties by calculation using TNT equivalency method. And then, by applying TNT equivalency value about the explosion limit concentration of LNG on the 2D-AUTODYN simulation, we could get the explosion pressure wave profiles (explosion pressure, explosion velocity, etc.). In the last step, we performed LNG explosion simulation by applying to the explosion pressure wave profiles as the input data on the 3D-AUTODYN simulation. As a result, we had performed analyzing of the explosion characteristics of LNG in accordance with concentration through the 3D-AUTODYN simulation in terms of the explosion pressure behavior and structure's destruction and damage behavior.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권3호
• /
• pp.1-9
• /
• 2017

The numerical analysis of groundwater flow is indispensable for predicting problems associated with water resource development, civil works, environmental hazards, and nuclear power plant construction. Korea lacks public regulatory procedures and guidelines for groundwater flow modeling, especially in nuclear facility sites, which makes adequate evaluation difficult. Feasible step-by-step guidelines are also unavailable. Consequently, reports on groundwater flow modeling have low-grade quality and often present controversial opinions. Additionally, without public guidelines, maintaining consistency in reviewing reports and enforcing laws is more challenging. In this study, the guidelines for groundwater flow modeling were reviewed for three countries - the United States (Documenting Groundwater Modeling at Sites Contaminated with Radioactive Substances), Canada (Guidelines for Groundwater Modelling to Assess Impacts of Proposed Natural Resource Development Activities), and Australia (Australian Groundwater Modelling Guidelines), with the aim of developing groundwater flow modeling regulatory guidelines that can be applied to nuclear facilities in Korea, in accordance with the Groundwater Act, Environmental Impact Assessment Act, and the Nuclear Safety Act.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.248-255
• /
• 1998

The objective of this study is to conduct the prevention method using electromyography that is to resist the strain on L5/S1 disc and to measure the heart rate for the prevention of low back pain during lifting. EMG signals and heart rate were analyzed under the condition of fixed vertical factor (20∼80cm), two horizontal factors (35cm, 55cm), and two weight factors (10kg, 25kg) 2 times per minute for each lifting task. Eight healthy male workers performed nine-step stretching exercises which were intensified back power at the L5/S1 disc for six months. After completion of the two trials, the results were compared. The results of this analysis show that EMG signals have more an effect on the weight than the horizontal factors similar to those analyzed previous study, and are decreased. Therefore, those exercises presented very efficient. Also, there are not statistically significant differences on the analysis result of heart rate between weight factors.

• 한국유체기계학회 논문집
• /
• 제4권3호
• /
• pp.53-61
• /
• 2001

Vortex type Fluidic Device(FD) which is installed at the bottom of Safety Injection Tank(SIT) controls the discharge flow rate from the tank. In case of loss of coolant accident the injection water flows into primary system in two steps; initial high flow rate for certain period of time and subsequent low flow rate. By two-step control of the discharge flow rate, FD can ensure the effective use of water in the tank. A small-scale FD has been tested to obtain a required flow characteristics maintaining full pressure and height of prototype, which are the major contributing parameters. Through the testing of many different arrangements of internal geometry of FD, most appropriate one was selected and its performance data was obtained. As characteristics of FD, time dependent Euler number, flow rate and pressure are presented and discussed. Also a method to predict the full size FD is presented.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1996년도 추계학술대회논문집
• /
• pp.185-190
• /
• 1996

Navigation system is regarded as the interface border line between the Intelligent Transportation Systems (ITS) and the driver as the prospective information provider of the ATIS (Advanced Traveler Information System). Following theory, if the navigation system appropriately designed and utilized, that can maximize the transport efficiency, contribute to improvements of the environments and road safety. To accomplish these dinds of objectives of the navigation system use, human factors plays an important roles specially focused on the driver's safety, performance and system usability. Because the effectiveness of the system depends on the acceptance of the system, and the extent to which the system conforms to driver physical and cognitive limitations and capabilities. Therefore, the ergonomic design vaniables must be seriously selected and reflected in early design step for more effective and appreciate product design. As the first step of this aim, this study selected and categorized the human factors design variables of the navigation system.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2005년도 춘계학술대회
• /
• pp.199-212
• /
• 2005

Many countries of the world is driving forward development of large-scale hub port. They are now pushing ahead with setting up of effective marketing strategies to survive in keen competitions of the 21st century port industry. The port is of ever increasing importance for the bridge connecting sea and road transportation in handling international cargoes. The port, differently from general working places, is a closed area required for security, customs, and quarantine procedures. The loading and unloading is being done differently by ports, cargoes, and ships. To do loading and unloading, a lot of equipment and different types of labor are required, which flow is complicated and safe management is essential. As above mentioned the port is very unique and very deteriorated working place in its working environment. The purpose of this study is to propose ways to reduce and prevent from port accidents. As first step to do this, we have collected 923 accidents happened at Incheon Port during the period of 1994 to 2003. We have thoroughly analyzed characteristics, harmfulness, and risk of the loading/unloading they have done, as well as the accident frequency and relationship between the accidents. As second step to further analyze, We have employed DMAIC technology, an advanced process of 6 sigma presently in spotlight as the best program for management innovation. This analysis results in recognition of important accident characteristics, causes and effects analysis, critical causes of accident, and suggestions to decrease accidents.