• Journal of Korean Society of Transportation
• /
• v.29 no.4
• /
• pp.17-28
• /
• 2011

This study proposed a speed management strategy for the enhancement of traffic safety on freeways. A novel feature of the proposed strategy is to provide desirable speed information to individual vehicles. A microscopic traffic simulator, VISSIM, was used for the performance evaluation. Vehicle trajectory data were used to evaluate the various speed management scenarios including the different levels of proportions of heavy vehicles. The proposed speed management strategy would be a useful precursor for developing an effective traffic control and operations system to prevent traffic accidents on freeways.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.12
• /
• pp.1227-1236
• /
• 2012

The low speed machinery faults are usually caused by the bearing failure of the rolling elements. As the life time of the bearing is limited, the condition monitoring of bearing is very important to maintain the continuous operation without failures. A few monitoring techniques using time domain, frequency domain and fuzzy neural network vibration analysis are introduced to detect and diagnose the faults of the low speed machinery. This paper presents a method of fault detection for the rolling element bearing in the low speed machinery using the Wiener filtering and shock pulse counting techniques. Wiener filter is used for noise cancellation and it clearly makes the shock pulse emerge from the time signal with the high level of noise. The shock pulse counting is used to determine the various faults obviously from the shock signal with transient pulses not related with the bearing fault. Machine fault simulator is used for the experimental measurement in order to verify this technique is the powerful tool for the low speed machine compared with the frequency analysis. The test results show that the method proposed is very effective parameter even for the signal with high contaminated noise, speed variation and very low energy. The presented method shows the optimal tool for the condition monitoring purpose to detect the various bearing fault with high accuracy.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.955-956
• /
• 2012

• Journal of Drive and Control
• /
• v.19 no.4
• /
• pp.1-9
• /
• 2022

The structure and operating principle of the 2-speed shift reducer were explained, the allowable bending stress value of the material was compared with the analysis result through FM structural analysis program, and the average stress distribution value of von Mises was performed on the gear root atmosphere. The structural safety of the 2-speed planetary gear reducer was verified through FM structural analysis. The natural frequency was calculated by applying the specifications of the planetary gears of the 2-speed gearbox, and the critical speed of resonance was calculated by calculating the natural frequency and the transmission error of the engaged gear pair. As a result of analyzing the critical speed, since it is formed higher than the actual operating speed range, it is considered safe because there is no resonance problem due to the suggested specifications of the planetary gears of the 2-speed shift reduction.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.2 no.1
• /
• pp.47-55
• /
• 1996

This paper intends to evaluate the seakeeping performance in consideration of nominal speed loss of ships in a seaway. Authors calculate the nominal speed loss in the Sea State of Beaufort Scale 6, 7 & 8 and obtain each response amplitude of ship;s motion by New Strip Method in consideration of them. This study presents some results of the seakeeping performance by the maximum dangerouseness of ships on each sea state.

• Journal of the Korean Society of Safety
• /
• v.12 no.2
• /
• pp.22-26
• /
• 1997

A small scale centrifugal oil separator consisted of two concentric tubes was fabricated for spilt oil recovery. With speed control of the inner tube, its performance of oil separation was investigated. Oil-water mixture is separated by forced vortex motion with the rotating inner tube. Velocity and pressure distributions in the tubes were calculated. Control of rotating speed, which is the most influencing parameter, showed an optimum value 946rpm corresponding to the acceleration of 20g at the inner tube surface. Separation performance was suddenly deteriorated at rotating speed higher than 1200rpm.

• Journal of the Korean Society of Safety
• /
• v.8 no.1
• /
• pp.64-70
• /
• 1993

Serious injuries and deaths due to multi-jointed robot occur when a man mispercepts. especially during robot teaching and maintenance work. Since industrial robots often operate with unpredictable motion patterns, establishment of safe speed limit of robot arm is indispensable. An experimental emergency conditions were simulated with a multi-jointed robot. and response characteristics of human operators were measured. The result showed that failure type, robot arm axis. and robot arm speed had significant effects on human reaction time. The reaction time was slightly increased with robot arm speed. though it showed somewhat different pattern owing to failure type. Furthermore the reaction time to the axis which could flex or extend. acting on a workpiece directly. was fastest and its standard deviation was small. The robot arm speed limit securing a‘possible contact zone’based on overrun distance was about 25cm/sec. and in this sense the validity of safe speed limits suggested by many precedent researchers were discussed.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.679-684
• /
• 2017

Recently, the speed of high-speed railway has been rapidly increase with the development of high-speed train design and operating technology. This causes a lot of complaints related the environmental noise in residential areas near the high-speed railway. In order to operate the high-speed railway in accordance with the design speed, noise reduction technology should be developed to meet the noise characteristics of high-speed railway. And it is important to develop the prediction technology by grasping the noise radiation characteristics. In order to meet these requirements, in recent years, infra-research for 400 km/h high speed railway has been conducted. Reliable noise prediction and noise reduction techniques have been developed through this study. This paper is concerned with wind pressure safety and noise performance evaluation of the newly developed 400 km/h noise reduction device. The wind pressure safety and The noise performance of the developed device was confirmed by this paper.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.194-200
• /
• 2007

The tilting train is able to tilt its body towards the center of the turning radius, preventing roll-over of the train as it runs on a curved rail at high-speed. This train, widely accepted for commercial purpose internationally is very beneficial in that the operating time is shortened without much capital investment to the infrastructure where there are many curved rails. Over several years, the Korea Railroad Research Institute(KRRI) has developed such a train. In this paper, the safety of the Korean tilting train express(TTX) is investigated using a dynamic simulation model. Since, proper safety standards have not been established for the TTX, those for the Korean train express(KTX) is employed instead to analyze the safety and ride comfort of the TTX. This study will prove useful in predicting the behavior of the TTX and ride comfort, and conforming that designed TTX measures up to the safety standards. It would be useful to recommend proper normal operating speed and determine the maximum safety speed, according to the result. Furthermore, it would be possible to provide basic reference data when analyzing the dynamic effect of the catenary system and the fatigue of the bogie.

• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.132-138
• /
• 2019

Fall accident is the most frequent accident type of occupational accidents. As the age of workers increases, trip and fall accident increases more than other types of occupational accident in the middle-aged group. In this study, the gait characteristics of 25 middle-aged participants (mean ages 47.4, S.D. 5.8) were studied to analyze the trip and fall risks. The Minimum toe clearance(MTC) against the floor surface was measured in the variable conditions of gait speed by a motion capture system. In the 50s age group, the MTC decreased and the MTC tended to reduce the variation with increasing walking speed in the level walking. Therefore, the trip and fall risks for the 50s age group is higher than the 40s age group. Especially, the faster walking speed will increase the trip and fall risks even more.