• International Journal of Internet, Broadcasting and Communication
• /
• 제6권2호
• /
• pp.20-24
• /
• 2014

These days the large-scale car accidents have often been occurred by overspeeding in disregard of sharp curve, foggy and freezing regions. This paper has proposed the algorithm to calculate the safety speed in real time that can protect the car accidents under these weather and road conditions using Fuzzy reasoning theory. Under raining and snowing, drivers have to slow down the traffic safety speed by 1/3 of the traffic safety speed indicated on the existing speed sign plate based on their decision. So it is difficult to calculate and then observe the safety speed. This paper has performed the simulation that provides the deivers with the optimal safety speed considering the road and weather conditions in real time to improve these problems. We have proved this method can improve more 25% than the existing one.

• 한국안전학회지
• /
• 제25권2호
• /
• pp.78-83
• /
• 2010

An installation of automated speed enforcement system(ASES) was known for traffic safety and accident preventive effects that traffic characteristics transmute by speed distribution stabilizing. This study is verified the variations of average speed, 85% speed, speed distribution and dispersion as traffic characteristics depend on enforcement system influences in the road. We tested selected 5 areas. By and large, it has a little differences depend on road geometric structure and traffic environment but that is not too much. After all, after automated speed enforcement system installed in all of test areas, average speed, 85% accumulated speed, speed distribution and dispersion characteristics were declined and equalized. The speed dispersion was smaller than before installed the ASES. The speed dispersion value of each case that is the limited speed has been 70Km/h, 80Km/h at flat and straight, 80Km/h at downhill and straight or downhill and left-curved area was 77.3%, 65.2%, 68.7% and 54.1%. Each of the data was declined. We could analyze that average speed distributed depletion factor was declined rapidly by 66.3% in test area.

• 한국안전학회지
• /
• 제33권1호
• /
• pp.103-108
• /
• 2018

Since tower cranes are susceptible to wind loads, the operation of the tower crane should be ceased when it exposed to a strong wind. For this reason, even in Korea, the operation limit for wind loading on the tower crane is regulated by a law. Recently the Korean law in which provided the wind speed limit to cease the tower crane operation has been revised from "instantaneous wind speed of 20 m/s" to "instantaneous wind speed of 15 m/s". Although this revision is expected to reduce safety risks in tower crane operation, some field operators still insist to lower the wind speed limit. However, in many countries "wind speed of 20 m/s" is normally used as the maximum in-service wind speed for tower cranes. Therefore, the investigation of the proper wind speed for regulation would be helpful to secure the safety of the tower crane operation under windy condition. In this study the validity of the revised wind speed limit is investigated with the surveys targeted to both tower crane practitioners and parties of concerned in construction companies, in which various questions was provided for a suitable wind speed limit and the answers were analyzed. The results showed that the revised wind speed limit is acceptable to tower crane practitioners as well as the parties of concerned in construction companies and is satisfying the structural stability requirement for in-service state tower crane. Therefore, it can be concluded that the revised wind speed limit is valid in humanly safety point of view.

• 한국도로학회논문집
• /
• 제18권4호
• /
• pp.77-82
• /
• 2016

PURPOSES : This paper proposes a reliability index for the safety evaluation of freeway sections. It establishes a reliability index as a safety surrogate on freeways considering speeds and speed dispersions. METHODS : We collated values of design elements including radii, curve lengths, vertical slopes (absolute values), superelevations, and vertical slopes from seven freeway sections in Korea. We also collected data about driving speeds, traffic accidents, and their deviations. We established a reliability index using these variables. RESULTS : The average radii, curve lengths, and superelevations are highly correlated with the incidence of traffic accidents. Deviations in radius and curve lengths show an especially high correlation. The reliability index, derived from speed and speed dispersions of the seven freeway sections, also correlated highly with accidents with a correlation index of 0.63. CONCLUSIONS : Since the reliability index obtained from speed and speed dispersions are highly correlated with traffic accidents, we conclude that a reliability index can be a safety surrogate on freeways considering speeds and speed dispersions together in terms of design and operational levels.

• International Journal of Railway
• /
• 제5권2호
• /
• pp.84-88
• /
• 2012

Derailment due to wheel failure would cause a tremendous social and economical cost in service operation. It is necessary to evaluate quantitatively the safety with respect to high-speed train. Although the safety of railway wheel has been ensured by an regular inspection, all critical defects cannot be detected in inspection cycles and the wheel has been replaced because a defect quickly become critical for safety. Therefore, it is important to calculate quantitatively the fracture limit and remnant life of damaged railway wheel in wheel-rail system. In present paper, the critical crack size of wheel for high-speed train is simulated based on fracture scenario and the safety of wheel is evaluated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.575-580
• /
• 2005

In this study, safety requirement & criteria for high-speed rail system were developed for safety verification as a national rules and regulations. Safety criteria were presented through analysis of high-speed rail development specification, survey of related regulations for safety requirements. and review of operation compatibility with domestic rail system. Finally, safety rule consist of system safety requirements and safety criteria for technical parts.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1943-1947
• /
• 2016

Korea Electrical Safety Cooperation(KESCO) have provided the electrical safety speed-call service from 2007 year. Purpose of the service is to reduce discomfort of electricity use and to prevent electrical accident like as electrical fire and shock accident by providing emergency treatment service on fault of the residential electrical facilities notified in the specific house like as a lower-income group and a social welfare facility. But efficiency and economic evaluation of the electrical safety speed-call service is impossible because analysis on the quantitative effect of the service is difficult. This paper presents cost-benefit analysis method and result of the electrical safety speed-call service. The presented cost-benefit analysis method has a two-step process: the first step is to measure quantitative electrical fire prevention effect of the service by using electrical accident statistics and developing outcome analysis logic model of the service effect, and the second step is to analysis cost-benefit(B/C)of the service by calculating quantitative benefit analysis on the measured quantitative electrical fire prevention effect. The results showed that cost-benefit(B/C)of the electrical safety speed-call service is over 4 after 2010 year.

• 한국안전학회지
• /
• 제31권5호
• /
• pp.158-170
• /
• 2016

It has been applied several ways in order to prevent traffic accidents and speed management on the road which is one of very important factors to prevent accidents. In this study, it is analyzed whether the facility such as the flashing and crosswalk, speed cameras and intermittent warning signs affect on a driving deceleration or not. It has been shown that the flashing and crosswalk and speed cameras except intermittent warning signs play a role of reducing the driving speed. The result showed that these traffic safety facilities help to improve the average speed as well as velocity distribution which was derived by the speed deviation even if there were the difference between facilities. Speed limit display does not affect the deceleration of the driver. Therefore, it was founded in this research that there were the driving speed reduction effect due to the facilities on the road. In order to control the driving speed on the road, it is necessary to install facilities with appropriate location and spacing on the road. In addition, place that turns out suppressed speeding through speed management also are required adequate facilities such as speed cameras.

• 한국안전학회지
• /
• 제33권2호
• /
• pp.145-151
• /
• 2018

In this study, the track-bridge interaction analysis was performed using an analytical model considering the track structure, thereby taking into account the linear conditions (R=650 m, cant variation $160{\pm}60mm$) and the dynamic characteristics of the bridge. As a result of the study, the allowable speed on the example bridge considered was calculated at 200 km/h based on vertical deflection, vertical acceleration, and irregularity in longitudinal level, but was also evaluated at 170km/h based on the coefficient of derailment, wheel load reduction, and lateral displacement of the rail head. It is considered desirable to set the speed 170km/h to the speed limit in order to secure the safety of both the bridge and the track. It is judged that there will be no problems with ensuring rail protection and train stability in the speed band.

• Journal of information and communication convergence engineering
• /
• 제18권1호
• /
• pp.49-54
• /
• 2020

Speed enforcement is one of the major challenges in traffic safety. The increasing number of accidents and fatalities has led governments to respond by implementing an intelligent control system. For example, the Korean government implemented a speed camera system for maintaining road safety. However, many drivers still engage in speeding behavior in blackspot areas where speed cameras are not provided. Therefore, we propose a methodology to analyze the combined accident and speeding data to offer recommendations to maintain traffic safety. We investigate three factors: "section," "existing speed camera location," and "over speeding data." To interpret the results, we used the QGIS tool for visualizing the spatial distribution of the incidents. Finally, we provide four recommendations based on the three aforementioned factors: "investigate with experts," "no action," "install fixed speed cameras," and "deploy mobile speed cameras."