• Journal of Navigation and Port Research
• /
• v.34 no.4
• /
• pp.293-298
• /
• 2010

The residential comfort and safety on ship are more focused than ever, in accordance with the increase of the crews' onboard time and interest in cruiser sailing. To grasp the safety characteristics on ships against various scenarios of evacuations, this study performed experiments and simulations for the evacuation times on a training ship. Through the experiments, the average walking speed is 3.0m/s on 100% visibility, and 1.2m/s on 8% visibility, but the speeds go down 1.3m/s and 0.7m/s, respectively, when obstacles are happened without any previous notification. From the simulation, it is clearly reconfirmed that the worse visibility and many people make evacuation time comparatively longer. And unlike the common expectation of the effect of emergency announcement, the difference of evacuation times between cases of announcement and non-announcement is negligible on this study. From the survey after experiments, it is known that experiment participants feel unsafe and fear when the evacuation routes are longer in bad visible condition, even if they know the perfect evacuation route. And the survey results also show that the evacuees give more careful consideration to make a evacuation route decision under bad visibility.

• Journal of the Korean Society of Safety
• /
• v.24 no.3
• /
• pp.65-70
• /
• 2009

In-vehicle route guidance information(RGI) systems have been developed with the advancement of the information and communication technologies. However, the RGI is provided by a pre-determined option, drivers occasionally pass the target intersection owing to non- or late- recognizing it. The purpose of this experiment is to examine the position of driver's tum signal operation and intersection recognition approaching at the target intersection which is difficult to identify as a preliminary research on developing the additional RGI connecting with the tum signal control. The field experiment was conducted to measure distances of the turn signal operation and intersection recognition from the target intersection according to driving lanes and landmarks at adjacent intersection. And, glance behavior to the car navigation display was evaluated by using an eye camera. The results indicate that drivers operate the turn signal after confirming a landmark in the case of the intersection with it. However, most case of driving, drivers operate the tum signal at 40 to 50m before coming to the target. To provide the additional RGI, when drivers do not operate the tum signal approaching at the target intersection based on the results, is expected to improve the traffic safety and the comfort for drivers.

• Journal of the Korea Safety Management & Science
• /
• v.21 no.4
• /
• pp.51-58
• /
• 2019

The LBS(Location Based Service) technology plays an important role in reducing wastes of time, losses of human lives and economic losses by detecting the user's location in order by suggesting the optimal evacuation route of the users in case of safety accidents. We developed an algorithm to estimate indoor location, movement path and indoor location changes of smart phone users based on the built-in sensors of smartphones and the dead-reckoning algorithm for pedestrians without a connection with smart devices such as Wi-Fi and Bluetooth. Furthermore, seven different indoor movement scenarios were selected to measure the performance of this algorithm and the accuracy of the indoor location estimation was measured by comparing the actual movement route and the algorithm results of the experimenter(pedestrian) who performed the indoor movement. The experimental result showed that this algorithm had an average accuracy of 95.0%.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.180-185
• /
• 2010

We have to develop more correct and systematic way to choose Hazardous Highway Segments. In this research, we applied CRP(Continuous Risk Profile) technique which developed by UC Berkeley Traffic Safety Center in year of 2007, and can analyze yearly dangerous level tendency of continuity in the route of main road that is under California Department of Transportation(Caltrans). We changed standard of CRP to suit in Korean circumstance with consideration in radius of curve and traffic volume. For the verification by actual accident data, we embodiment the CRP by using the data from total of 587 case of accident in latest 10 years in Gyeong-Bu Highways, the amount of 56km. Finally, the effectiveness of technique in this research has been verified by obtained same result with current method for Hazardous Highway Segments. In addition, when calculating the Hazardous Highway Segments with technique that presented in this research we obtained following statements. First, identified dangerous level of continuity in the route by using CRP. Second, Accurate of Actual Hazardous Highway Segments selection has been developed by using last 10 year's data and profile making which provide simplicity analyze of Tendency. Third, after reforming the way of selection, effective range has been wider than former selection and it gives advantage for the policy side.

• Journal of the Korean Society of Safety
• /
• v.20 no.4 s.72
• /
• pp.114-121
• /
• 2005

Railroad shunting movements connecting and disconnecting train sets are very susceptible to human errors since they depend on human decision-making and action procedure that are variable to situation to situation. Nevertheless, in the investigation of railroad accidents, all the accident causes related with human factors have merely been categorized as 'careless treatment' of the workers without any systematic approach of behavioral sciences or the analysis of human errors. In this research, therefore, 137 accident cases occurred during railroad shunting movements and 435 accident cases occurred during driving were analyzed with a special interest of human errors. According to results, the traditional accident investigation scheme used for last several decades did not seem to be appropriate for catching up true accident causes with respect to human errors. In addition, both signal men and locomotive drivers made many mistakes in judgement/action stage while the former mainly commit judgement tasks where as the latter mainly commit cognition tasks. Ant those tasks such as 'confirmation of signal and route', 'location check-up of connected train sets', and 'route identification for a shift of track' ranked highly for accident susceptibility.

• International Journal of Advanced Culture Technology
• /
• v.5 no.1
• /
• pp.90-97
• /
• 2017

Nowadays, the most of commercial buildings are build-out with complex architecture and decorated with more complicated interiors of buildings so establishing intelligible escape routes becomes an important case of fire or other emergency in a limited time. The commercial buildings are already equipped with multiple exit signs and these exit signs may create confusion and leads the people into different directions under emergency. This can jeopardize the emergency situation into a chaotic state, especially in a complex layout buildings. There are many research focused on implementing different approached to improve the exit sign system with better visual navigating effects, such as the use of laser beams, the combination of audio and video cues, etc. However the digital signage system based emergency exit sign management is one of the best solution to guide people under emergency situations to escape. This research paper, propose an intelligent evacuation route GUIDE that uses the combination centralized Wireless Sensor Networks (WSN) and digital signage for people safety and avoids dangers from emergency conditions. This proposed system applies WSN to detect the environment condition in the building and uses an evacuation algorithm to estimate the safe route to escape using the sensor information and then activates the signage system to display the safe evacuation route instruction GUIDE according to the location the signage system is installed. This paper presented the prototype of the proposed signage system and execution time to find the route with future research directions. The proposed system provides a natural intelligent evacuation route interface for self or remote operation in facility management to efficiently GUIDE people to the safe exit under emergency conditions.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.591-598
• /
• 2008

Recently, the government has improvement projects of dangerous road for the site that has very high accident rate due to bad geometric structures of the road. Although, route selecting of the road is a basic and important process, but the process of route selecting must consider the technical, safety and environment factor together. Also, the technology for the 3-dimensional terrain model can be used as an important factor in planning and designing for selecting alternative route projects. In the course of experimenting with the 3-dimensional topography generated by the combination of the digital map and drawing of route, the technology as been developed to offer the multi-dimensional access to the potential construction sites from the nearby main roads. This 3-dimensional digital elevation model has made it possible to make various terrain analysis base on GIS, which provides real-time virtual access to the designated construction sites for development planning and construction projects. Therefore, this study presents a reasonable plan for route selecting from some alternative routes through subjective evaluation and classify the methods linked basic design of road construction.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.11
• /
• pp.1526-1532
• /
• 2014

The Electronic Interlocking unit in railway signalling system is safety-related facilities to determine route and speed for train running. In particular, the SSI(Solid State Interlocking) is Electronic Interlocking unit for high-speed railway, and it performs safety-critical function by MPM(Micro-Processor Module). Meanwhile, MPM is composed of the PES(Programmable Electronic System)-based system, and the PES-based system in railway safety-related facilities should be implemented by complying with the safety requirements defined in IEC 62425 and IEC 61508. In this paper, we performed modeling of failure rate and reliability for MPM implemented by fault tolerance methods and analyzed functional safety for MPM. Moreover, we determined SIL(Safety Integrity Level) for MPM according to the safety requirements defined in IEC 61508 based on an analyzed functional safety.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.12
• /
• pp.661-666
• /
• 2006

Interlocking signalling system plays key role as core system to manage railway operation. The core role of railway operation is to control routing, displaying signal and regulation for train. Interlocking system relate tightly to railway accident because collision and derailment is sometime taken place wrong route setting and signal displaying. Safety activity for interlocking system is inevitable to avoid the accident over its life cycle. The safety activity includes hazard identification and analysis, safety requirement allocation, safety plan, safety activity and ao on. The safety activity need a broad wide range work. In this paper, we concentrate on hazard identification for generic interlocking system and programmable electronic interlocking system and compare between two results. The hazards will be used for safety activity.

• International Journal of High-Rise Buildings
• /
• v.11 no.3
• /
• pp.227-240
• /
• 2022

Under the Korean Enforcement Decree of the Building Act, all high story apartment houses more than 5 stories high are mandated to install a fire evacuation system to ensure safe evacuation from fire accidents and providing quick and easy bidirectional escape route when main entrance is blocked by flame or toxic smoke. However, the current fire evacuation system shows a lack of understanding from residents and thus is widely ignored for having insufficient safety functions, especially vis-à-vis fire emergencies. Studies have found that an alternative evacuation method, the escapable fire evacuation system, has been analyzed for safety evaluation compared with the conventional passive fire escape system and can bring efficient and safer solutions, providing high rise residents escape from fire accidents. Evaluation for safety evacuation has been performed by the Fire Dynamics Simulation and applying Pathfinder simulation. This resulted in providing appropriate escape routes within the safety escape time and allowed for people in high rise building fires to get to safety.