• Journal of the Korean Society of Safety
• /
• v.37 no.3
• /
• pp.52-59
• /
• 2022

Conventionally, all the unsafe acts by human beings in relation to industrial accidents have been regarded as unintentional human errors. Exceptionally, however, in the cases with fatalities, seriously injured workers, and/or losses that evoked social issues, attention was paid to violating related laws and regulations for finding out some people to be prosecuted and given judicial punishments. As Heinrich stated, injury or loss in an accident is quite a random variable, so it can be unfair to utilize it as a criterion for prosecution or punishment. The present study was conducted to comprehend how categorizing intentional violations in unsafe acts might disrupt conventional conclusions about the industrial accident process. It was also intended to seek out the right direction for countermeasures by examining unsafe acts comprehensively rather than limiting the analysis to human errors only. In an analysis of 150 industrial accident cases that caused fatalities and featured relatively clear accident scenarios, the results showed that only 36.0% (54 cases) of the workers recognized the situation they confronted as risky, out of which 29.6% (16 cases) thought of the risk as trivial. In addition, even when the risks were recognized, most workers attempted to solve the hazardous situations in ways that violated rules or regulations. If analyzed with a focus on human errors, accidents can be attributed to personal deviations. However, if considered with an emphasis on safety rules or regulations, the focus will naturally move to the question of whether the workers intentionally violated them or not. As a consequence, failure of managerial efforts may be highlighted. Therefore, it was concluded that management should consider unsafe acts comprehensively, with violations included in principle, during accident investigations and the development of countermeasures to prevent future accidents.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.132-139
• /
• 2014

According to the increase of foreign laborers at domestic construction sites, it's necessary to research in terms of the unsafe acts of both Korean and foreign laborers in order to prevent construction disasters. The objective of this study is to clarify the characteristics and the improvement priority of the unsafe acts using IPA(Importance-Performance Analysis). The result of this study showed which items of unsafe acts are identify difference between Korean and foreign laborers. Moreover, the result of IPA also showed items of unsafe acts that needed the immediate improvement for each one. Especially there are two items, i.e. equipment malfunction and wrong handling of hand tools, which both Korean and foreign laborers think simultaneous those needs improvement. The results can be utilized to plan and to improve the safety management and education at a site considering the characteristics of foreign laborers.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.4
• /
• pp.1-8
• /
• 2009

The studies on semiconductor industrial accident in korea have been focused on the frequencies of each type of safety management employee, characteristics, cause and unsafe conditions, acts and so on. Those attributes of semiconductor industrial accidents were usually analyzed independently, so that it was hard to provides a wel-developed process and systematic guidelines for efficient safety management. Therefore, there were a few studies based on comprehensive survey in terms of the shape type of safe management. The questionnaire survey carried out for the 284 workers who were responsible for safety management in center with cooperation companies in semiconductor industry factor analysis showed that there were three factors of safety management. First, investment and operation and management for accident prevention, Second, unsafe act and condition, safety management Third, general human error and behavior. The industries of respondents were correlative with three groups. Three groups showed statistically significant differences on the number of cases. Actually, the group with the larger investment and the more unsafe cause, human error of accidents prevention had a smaller causes of accident cases.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.5
• /
• pp.161-168
• /
• 2019

Construction industry is becoming more advanced, but safety accidents are not decreasing and unsafe act (UA) and human errors (HE) are the main causes of safety accidents. Therefore, this study aims to analyze the relationships between unsafe acts and human errors for construction accident prevents. Specifically, the Correlation Analysis is used to quantify 24 combinations of the relationship between the UA and HE. Then, the Kano Model, and Timko Satisfied Coefficient was utilized to find 6 combinations for construction accident prevention plans. As the result of Timko Satisfied Coefficient, an interview was conducted with three safety managers and 6 safety prevention plan is proposed. Through these results, it is expected that the combination of 24 accidents will be basic data of safety management. Especially, the proposed safety prevention plans considering the characteristics of 6 combinations with high correlation can contribute to prevention of safety accidents at the construction site.

• Journal of the Korean Society of Safety
• /
• v.38 no.1
• /
• pp.70-77
• /
• 2023

Gas has replaced coal or petroleum as primary fuel because of its convenience. However, gas has risk of fire, explosion, or poisoning. To reduce gas-related accidents, many strategic projects have been being carried based on 'Gas Safety Management Basic Plans' on a domestic scale. In spite of those projects, the gas-related accident rate did not decrease over past decades. Thus, this study was conducted to analyze the effectiveness of ongoing projects, and to find out ways to make improvements. Conventional statistical analyses on accident data published by gas-related institutions were not useful to determine meaningful attributes to predict future. Whereas, accident case analyses adopted in the present study discovered differences in the type of people and their unsafe acts for each gas type. Meanwhile, the overall average priority of projects was not high in the aspect of System Safety Precedence. If the current trend is maintained, with sigmoid functions, it can be estimated that mean annual accident rate will decrease by only 2.0% in the next two decades. To improve the current trend, the present study made conclusions as followings: (1) safety projects should be designed with careful consideration of accident traits including gas type, unsafe acts, and persons involved and (2) alternative strategies should include system considerations such as minimum hazard design and safety devices prior to mere education or training. To summarize briefly, the present state related with gas accidents highlights the necessity of a system-based multidisciplinary approach.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.131-140
• /
• 2003

An accident involving a boiler can result in a disaster since it handles high-pressurized steam so that it may cause an explosion. Therefore, the boiler is very susceptible to industrial accidents. This thesis aimed to develop counter-plans to prevent industrial accidents involved the boiler. At first after collecting accident cases involving boilers, a survey on the trait of them was carried out. Ant on the other hand a qualitative analysis was conducted to draw out hazardous components in the boiler itself and their inherent relative importance was assessed. Through this procedure, 'negligence of unsafe condition' was noted as the major cause for unsafe acts whereas 'fault in work procedure' for unsafe condition. In the meanwhile, results of a hazard analysis using FMEA technique ranked gas safety devices, a switch preventing gas from under-pressurization, protect relays high. In particular, it was pointed out that the water feeding and steam subsystem has more components in hazard than other subsystems. Considering these analyses results, counter-plans to improve safety management was suggested also.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.4
• /
• pp.195-203
• /
• 2017

Around 70% of domestic aircraft accidents in helicopter aircraft. The causal factors of the helicopter accidents are identified as human factors. People have focused mostly on unsafe acts to prevent the accident. The accidents should be analysed on human factors to reduce accident. The unsafe acts can be managed effectively if the latent failures were identified through the HFACS. This paper is to introduce about the latent failure classified by the HFACS and provide the analysis regarding the latent failure of the helicopters by the aviation safety advisors through the interviews.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.8
• /
• pp.721-725
• /
• 2016

This paper reviews the analysis of a given scenario according to the Hybrid Model, and why accident causation models are necessary in casualty investigations. The given scenario has been analyzed according to the Hybrid Model using its main five components, fallible decisions, line management, psychological precursors to unsafe acts, unsafe acts, and inadequate defenses. In addition, the differences between the SHEL and the Hybrid Model, and the importance of a safety barrier during an accident investigation, are shown in this paper. One unit of SHEL can be linked with another unit of SHEL. However, it cannot be used for the analysis of an accident. Therefore, we must use an accident causation model, which can be a Hybrid Model. This can explain the "How" and "Why" of accident, so it is a suitable model for analyzing them. During an accident investigation, the reason we focus on a safety barrier is to create another safety barrier or to change an existing safety barrier if that barrier fails. Hence, the paper shows how a sea accident can be investigated, and we propose a preventive way of avoiding the accident through combining the methods of different models for the future.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.327-336
• /
• 2007

Construction activities are characterized as hazardous work. Therefore, it is very imperative to explore comprehensively fatal accidents and safety performance in both developed and developing countries. The goal of this study was to look at the reasons behind fatal accidents in HCMC, Vietnam's largest city. The survey sample consists of 91 fatal accident cases in total that occurred in construction sites during the years 1996-2005 and were reported to the Department of Labor-Invalids-Social Affairs in HCMC. The study was conducted by means of field surveys with relevant individuals working in construction sites and statistical analyses. The research resulted in failing to wear/use PPE as unsafe acts and in poor safety management procedures/methods in sites as insecurely working conditions behind serious accidents in the construction. The paper stresses that accidents tended to occur more in state-owned companies than in others and involved more with masonry/welding people and workers without labor contracts than with other workers.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.1
• /
• pp.75-82
• /
• 2016

According to the statistics, occupational fatal injuries by the fork lifts were about 30 per year in whole industrial. Fork lifts are widely used in various parts of industries to improve the efficiency of the work. In this study, the current regulations to be adequate in industrial site have to be renew in order to prevent the fatal injuries by the fork lifts. Fatal injury analysis were conducted with several accident cases by the fork lifts. For each accident, the causes of the injuries were examined and proper safety measures were proposed. In this study, the fork lift showed a high fatality rate in industrial accidents and no detailed cause analysis of fatal accidents was conducted in terms of unsafe acts or conditions. First, fork lifts were the highest of the machines caused the accidents. In order to prevent fatal injuries by the fork lifts, the tarket was manufacturing industry. Second, the order of the cause of cognitive engineering agenda in the manufacture industrial was visibility, responsibility and affordance, and revision of acts was proposed. Third, there was not a lots of different points of human error between occurrence types and business sizes. Forth, number of fatalities by the attacker was more than by the inducer.