• Journal of the Korean Society of Safety
• /
• v.23 no.2
• /
• pp.57-64
• /
• 2008

The Semiconductor industry in Korea has achieved a great contribution to the growth of its economy for the last 20 years with its product export ranked to #1 nowadays. However, the working environment in semiconductor industry is always exposed to a potential risk of critical safety issue for workers with many kinds of utilities used such as toxic chemicals, gases, high vacuum and high voltages of electricity. This study is focused on empirical research to find out the factors on safety climate and to examine the relationships of safety climate and safe work behaviour in the work site of Korea semiconductor industry. As a result of simulation, a strong positive relationships and safe work behaviour have been identified in this study. Its result and implications has been discussed and suggested further studies on its limitation from this study.

• Safety and Health at Work
• /
• v.3 no.3
• /
• pp.199-208
• /
• 2012

Objectives: Although evidence-based medicine (EBM) is a useful method for integrating evidence into the decision-making process of occupational physicians, occupational physicians lack EBM knowledge and skills, and do not have the time to learn the EBM method. In order to enable them to educate themselves at the time and place they prefer, we designed an electronic EBM course. We studied the feasibility and utility of the course as well as its effectiveness in increasing EBM knowledge, skills, and behaviour. Methods: Occupational physicians from various countries were included in a within-subjects study. Measurements were conducted on participants' EBM knowledge, skills, behaviour, and determinants of behaviour at baseline, directly after finishing the course and 2 months later (n = 36). The feasibility and utility of the course were evaluated directly after the course (n = 42). Results: The course is applicable as an introductory course on EBM for occupational physicians in various countries. The course is effective in enhancing EBM knowledge and self-efficacy in practising EBM. No significant effect was found on EBM skills, behaviour, and determinants of behaviour. After the course, more occupational physicians use the international journals to solve a case. Conclusion: An electronic introductory EBM course is suitable for occupational physicians. Although it is an effective method for increasing EBM knowledge, it does not seem effective in improving skills and behaviour. We recommend integrating e-learning courses with blended learning, where it can be used side by side with other educational methods that are effective in changing behaviour.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.51-52
• /
• 2012

Safety at sea continues to be an important topic for research. The factors that contribute to safety issues are often complex and unclear. Lack of non-technical skills in such areas as communication, teamworking, situational awareness, decision making etc. are well documented as directly affecting safety in high risk work settings such as on board merchant vessels. Competence in non-technical skills can be affected by various habits and circumstances that influence a worker and result in either positive thinking and behaviour or negative thinking and behaviour. Negative thinking can cause stress, anger, frustration; loneliness etc. and this can possibly result in behaviour or actions that undermine the safety of crew and ship. Factors that may contribute to these negative thoughts and behaviours are many and varied and this paper will be looking at one aspect: mobile phone use. In the Republic of Korea, dependency on mobile phones is uniquely high. Maritime students are also susceptible to such dependency and this paper will demonstrate that the symptoms associated with mobile phone addiction and dependency, and in particular the symptoms of withdrawal, are important factors that need to be mitigated in order to improve safety at sea. Although the benefits of mobile phones are many it will be suggested that over-reliance, dependency or addiction can result in negative thinking or behaviour that may directly or indirectly contribute to the factors that cause incidents and accidents at sea. It will be suggested that the most appropriate method of dealing with this problem is twofold: firstly, through training at the educational level and secondly, by encouraging the shipping industry and government to invest more into providing seafarers with better access to the communication methods that they are used to on shore in order to improve work conditions.

• Journal of the Korean Society for Railway
• /
• v.9 no.4 s.35
• /
• pp.461-466
• /
• 2006

In order to transport cargo rapidly and safely from the trans-Korean railway to the trans-Siberian railway having a different gauge, a gauge-changeable freight wagon can be used. Because the wagon is expected to run in South Korea, North Korea and Russia, it should have good dynamic performance in these railways. In this paper, the dynamic characteristics of a gauge-changeable freight wagon was analyzed numerically using ADAMS/Rail in each condition of the railways having different gauges and rail profiles. The wagon makes use of load sensitive friction damping and has highly nonlinear behaviour, which is modeled in detail as the full nonlinear dynamic model. It is shown that the running behaviour of the wagon is sensitive to changes in the rail gauge and profiles, however the assessment quantities from the point of view of safety, track fatigue and running behaviour are less than the limit valves.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.13 no.4
• /
• pp.11-28
• /
• 2005

The research purpose of A Study on the Effect of Aviation Safety over the Air Passenger's Behavior for enhancement of aviation safety management lies at the judgement that passenger's airlines choice criteria has much changed after several serious aviation accidents as before when we used to overlook "aviation safety" variable through surveying to Korean aviation passengers and foreigners visit or travel Korea on various purposes. This study will be regarded significant in terms that empirical analysis was used to prove "Aviation Safety", a variable which had not been regarded as a airline choice factor within Korea air transport market so far, and has an effect on the air passengers' airline preference change and choice after recent frequent aviation accidents. I wish, it can be another opportunity for Korean two national flag airlines to reappraise and reinforce the significance of "aviation safety" and set forth immediate vigorous efforts to support the government's aviation safety improvement countermeasures.

• International Journal of Safety
• /
• v.9 no.2
• /
• pp.6-10
• /
• 2010

The flash point of liquid solution is one of the most important flammability properties that used in hazard and risk assessments. Minimum flash point behaviour (MFPB) is showed when the flash point of a liquid mixture is below the flash points of the individual components. In this paper, the lower flash points for the flammable binary system, n-decane+n-octanol, were measured by Pensky-Martens closed cup tester. This binary mixture exhibited MFPB. The measured flash points were compared with the values calculated by the Raoult's law and the optimization method using van Laar and UNIQUAC equations. The optimization method were found to be better than those based on the Raoult's law, and successfully estimated MFPB. The opimization method based on the van Laar equation described the experimentally-derived data more effectively than was the case when the prediction model was based upon the UNIQUAC.

• Structural Engineering and Mechanics
• /
• v.80 no.5
• /
• pp.523-538
• /
• 2021

The mechanical behaviour and stability of coal mining engineering underground is significantly affected by ground water. In this study, nuclear magnetic resonance imaging (NMRI) technique was employed to determine the water distribution characteristics in coal specimens during saturation process, based on which the functional rule for water distribution was proposed. Then, using discrete element method (DEM), an innovative numerical modelling method was developed to simulate water-weakening effect on coal behaviour considering moisture content and water distribution. Three water distribution numerical models, namely surface-wetting model, core-wetting model and uniform-wetting model, were established to explore the water distribution influences. The feasibility and validity of the surface-wetting model were further demonstrated by comparing the simulation results with laboratory results. The investigation reveals that coal mechanical properties are affected by both water saturation coefficient and water distribution condition. For all water distribution models, micro-cracks always initiate and nucleate in the water-rich area and thus lead to distinct macro fracture characteristics. With the increase of water saturation coefficient, the failure of coal tends to be less violent with less cracks and ejected fragments. In addition, the core-wetting specimen is more sensitive to water than specimens with other water distribution models.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.3
• /
• pp.11-22
• /
• 2018

Existing efforts to reduce total egress time actually focused on reducing travel time. However, consideration to reduce perception time or response time was insufficient although the ratio of travel time is one-third of total egress time and situations which the safety cannot be ensured by only reducing travel time were aroused. Therefore, the concept of disaster information, which could reduce both perception time and response time got attention To analyze the effect of disaster information on occupant behaviour, this study identified a relationship between 10 major disaster information and 3 occupant behaviour factors in terms of reducing egress time. By referring the relationship, this study conducted an virtual egress experiment with survey on 4 cases, the elderly, intellectual disabled, hearing disabled and visual disabled, to identify disaster information which reduce total egress time effectively. Finally, by analyzing the experiment result, this study proposed the process of disaster information effect on occupant behaviour as complementing insufficient occupant behaviour to ensure the minimum level of safety and maximizing relatively high occupant behaviour to ensure enough level of safety. The results are expected to account for relationship between disaster information and occupant behaviour with more explanatory power in terms of egress time. With further studies of disaster information and group behaviour, these series of studies could provide basic references for disaster information and occupant behaviour.

• Tunnel and Underground Space
• /
• v.17 no.1 s.66
• /
• pp.9-16
• /
• 2007

The influence of round length on the tunnel stability and construction cost is well acknowledged by many researchers and engineers but the coherent procedure is not available for its determination. In this study, the behaviour modes of the face and unsupported span was investigated for weak rock tunnel by a small scale model test, PFC3D and FDM analyses in consideration of the round length. Total five types of behaviour modes are defined and quantitative estimation of the behaviour modes was established in terms of the safety factor for the face stability and the conditional chart. Although the proposed method has some restrictions, this method can provide useful information for the optimization of the round length and excavation, especially in design stage.

• Steel and Composite Structures
• /
• v.37 no.5
• /
• pp.517-532
• /
• 2020

This paper firstly developed a new type of Double Skin Composite (DSC) beams using novel enhanced C-channels (ECs). The shear behaviour of novel ECs was firstly studied through two push-out tests. Eleven full-scale DSC beams with ECs (DSCB-ECs) were tested under four-point loading to study their ultimate strength behaviours, and the studied parameters were thickness of steel faceplate, spacing of ECs, shear span, and strength of concrete core. Test results showed that all the DSCB-ECs failed in flexure-governed mode, which confirmed the effective bonding of ECs. The working mechanisms of DSCB-ECs with different parameters were reported, analysed and discussed. The load-deflection (or strain) behaviour of DSCB-ECs were also detailed reported. The effects of studied parameters on ultimate strength behaviour of DSCB-ECs have been discussed and analysed. Including the experimental studies, this paper also developed theoretical models to predict the initial stiffness, elastic stiffness, cracking, yielding, and ultimate loads of DSCB-ECs. Validations of predictions against 11 test results proved the reasonable estimations of the developed theoretical models on those stiffness and strength indexes. Finally, conclusions were given based on these tests and analysis.