• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.222-227
• /
• 2004

Korean High Speed Train(KHST) has been tested on the high speed test line in Osung site, since it was developed through the G7 Project Plan in 2002. It was also tested on the conventional line such as KyongBu and Honan Line to know the possibility of increasing the limited speed for the high speed trains. This paper introduces the method to improve the speed on the conventional line with body lateral acceleration among the several considered issues and explains the parameters related to those analysis, such as the cant deficiency, the radius of curve, speed and etc. When a train pass on the curved track, the lateral accelerations of body are divided into the quasi-static and the maximum accelerations according to the UIC 518 which is the international specification for testing and approval of railway vehicles from the point of view of their dynamic behaviour, especially for safety and ride comfort. This paper shows that it is safe and comfort from the results of test when KHST runs on the conventional line with the curves and proposes that the limited speed of conventional curved line could be changed to a little higher speed if the analysises of other fields are completed.

• 드라이브 ㆍ 컨트롤
• /
• 제19권4호
• /
• pp.1-9
• /
• 2022

The structure and operating principle of the 2-speed shift reducer were explained, the allowable bending stress value of the material was compared with the analysis result through FM structural analysis program, and the average stress distribution value of von Mises was performed on the gear root atmosphere. The structural safety of the 2-speed planetary gear reducer was verified through FM structural analysis. The natural frequency was calculated by applying the specifications of the planetary gears of the 2-speed gearbox, and the critical speed of resonance was calculated by calculating the natural frequency and the transmission error of the engaged gear pair. As a result of analyzing the critical speed, since it is formed higher than the actual operating speed range, it is considered safe because there is no resonance problem due to the suggested specifications of the planetary gears of the 2-speed shift reduction.

• 한국컴퓨터정보학회논문지
• /
• 제20권12호
• /
• pp.37-44
• /
• 2015

In this paper, we propose the assistance method to enable safe driving through analysis of dangerous driving behavior using real-time alarm by vehicle speed, azimuth data and smartphone. For this method, smartphone is receiving driving data from digital tachograph using communication. Safe driving habit is a very important issue to commercial vehicle because that driver's long time driving than other vehicle type driver. Existing methods are very inefficient to improve immediately dangerous driving habits during driving because proceed driving behavior analysis after the vehicle operation. We propose the new safe driving assistance method that can prevent traffic accidents by real-time and improve the driver's wrong driving habits through real-time dangerous driving behavior analysis and notification the result to the driver. We have confirmed that the method in this paper will help to improve driving habits and can be applied through the proposed method implementation and simulation experiment.

• International Journal of Computer Science & Network Security
• /
• 제23권11호
• /
• pp.43-52
• /
• 2023

The paper aims to clarify how to make a decision using geographic information systems and how to choose the best route between two cities to suit the expectations of the driver and his sense of safety and comfort on the road. Use a special model for network analysis, where the network analysis tool relied on the following data (maximum speed of the road - number of intersections - road width - peak period) in choosing the best safe path. The paper concluded that the best safe route for refugees between the cities of Khartoum - Arqin crossing is ( Khartoum - Shendi - Atbara - Meroe - Abu Hamad - Wadi Halfa). We advise all GIS users to use the theories of spatial analysis when creating a new model.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1720-1723
• /
• 2003

Recently, as the road capacity reaches a limit and environmental problems becomes serious, there exists a gradually increased need for railway vehicles that are environment-friendly, punctual, reliable and safe. Accordingly, in addition to conventional railroad vehicles, lots of vehicles are being newly developed. Korean High Speed Train has been developed for last 6 years to satisfy the need. Authors developed a measurement system for on-line test and evaluation of performances of Korean High-Speed Train. The measurement system is composed of software part and hardware part. Perfect interface between multi-users is possible. A new method to measure temperature was applied to the measurement system. By using the system, measurement and evaluation of the mechanical characteristics of motors and main transformers in Korean High Speed Train was conducted during test running. The measured results for the temperature characteristics of electric devices verify that the measurement system is accurate and reliable.

• Journal of Advanced Marine Engineering and Technology
• /
• 제16권5호
• /
• pp.50-59
• /
• 1992

A critical speed analysis of a pump shaft has been investigated. Among various methods in the shaft critical speed calculation, a transfer matrix method has been examined in this research. After a brief review on the transfer matrix method, a modeling procedure for a continuous structure has been discussed. Then, a critical speed of a multistage pump shaft has been estimated up to several low modes. Throughout an analysis, parametric effects on the bearing stiffness, a degree of the modeling order, and attachmant of the impeller have been investigated. As an application example, a critical speed analysis of a verical pump which has been implemented in domestic electric power plants for cooling water circulation has been conducted in order to provide a safe operation as far as a pump vibration is concerned.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.112-122
• /
• 2006

Is the high speed train with 300km/h running speed safe from derailment when it meets the mid or small-size earthquakes? In the present step, it is not so easy to judge whether it'll be derailed or not during an earthquake. However, we could elevate the running safety of high speed train as making it slow or even stop. The main objective of this study is to make the domestic running regulation and the re-running manual for high speed train with reference to the standards of France, Japan etc. To do so, numerical analysis and experiment will be performed from the next year. In addition, we'll evaluate possible places of derailment during an earthquake and make a database based on the Geographic Information System to effectively manage them.

• Journal of information and communication convergence engineering
• /
• 제19권1호
• /
• pp.61-66
• /
• 2021

An underwater remotely operated vehicle (ROV) has been implemented. It can inspect foreign substances through a CCD camera while the ROV is running in water. The maximum thrust of the ROV's running thruster is 139.3 N, allowing the ROV to move forward and backward at a running speed of 1.03 m/s underwater. The structural strength of the guard frame was analyzed when the ROV collided with a wall while traveling at a speed of 1.03 m/s underwater, and found to be safe. The maximum running speed of the ROV is 1.08 m/s and the working speed is 0.2 m/s in a 5.8-m deep-water wave pool, which satisfies the target performance. As the ROV traveled underwater at a speed of 0.2 m/s, the inspection camera was able to read characters that were 3 mm in width at a depth of 1.5 m, which meant it could sufficiently identify foreign objects in the water.

• 해양환경안전학회지
• /
• 제20권2호
• /
• pp.193-201
• /
• 2014

본 연구는 강조류 해역을 통과하는 선박의 해양사고를 방지하기 위해 안전한 항행속력과 적절한 통과시기를 제시하였다. 이 자료의 해석을 위하여 2010년 7월 12일부터 15일까지 명량수도를 대상으로 통과선박의 AIS 데이터 수집과 2010년 9월 4일 현장조사를 실시하였고, 여기서 수집된 자료를 바탕으로 최소항행속력(minimum navigation speed)과 여유 제어력을 감안한 적정항행속력(optimum navigation speed), 조류속력별 대응타각(respond rudder angle)을 산출하였다. 또한 조위와 조류속력 데이터를 분석해 안전한 통과시기를 제시하였다. 이 연구를 통해 얻은 결과는 다음과 같다. (1) 조류의 유속이 4.4 kn 이상이 되면 선박의 타만으론 자력 조선이 불가능하다. (2) 강한 조류에 의해 발생되는 유압력과 회두모멘트에 대응하기 위해서는 최소항행속력은 조류의 2.3배, 적정항행속력은 조류의 4.0배 이상이어야 한다. (3)사리 기간 중 명량수도 적정 통과 시기는 고 저조시간 1시간 전부터 최소 30분 전까지이며 고 저조가 된 이후 5시간 동안은 4 kn 이상의 유속이 남아있는 시간으로 이 지역 항해를 자제해야 한다.

• 한국ITS학회 논문지
• /
• 제9권1호
• /
• pp.55-68
• /
• 2010

IEEE WAVE는 고속 이동 중인 차량 네트워크에서 운전자 안전 정보 및 상업적 서비스를 제공하기 위한 무선 전송 기술로써 현재 표준화가 활발히 진행 중이다. 본 논문에서는 IEEE WAVE를 기반으로 하는 안전운전 지원 서비스를 위한 응용계층 프로토콜과 이를 기반으로 하는 응용 시스템을 소개한다. 본 논문에서 다루는 안전운전 지원 서비스로는 공사구간 정보 서비스 및 사고차량 신고 서비스, 응급차량 알림 서비스, 프로브 서비스, 딜레마구간 의사결정 지원 서비스를 포함한다. 시스템의 기능 검증을 위하여 에뮬레이터 시스템을 구현하였으며 에뮬레이터는 차량과 도로의 모든 상황을 관리하는 에뮬레이터 서버와 각각의 기능 개체(차량 및 노변, 교통 센터)를 포함하는 클라이언트로 구성된다.