• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.161-171
• /
• 2016

OBJECTIVES : Many roadway departure crashes on the freeway interchange are due to the running speed being greater than the design speed. This study aims to ensure a safe and pleasant driving experience for the driver by increasing the superelevation based on the running speed on the highway interchange ramp. METHODS : The mean running speed for each type of ramp is calculated on site survey more than 10 interchanges. Using the mean running speed, we calculated the superelevation and the side friction using the method given in "A Policy on Geometric Design of Highways and Street" (Pages 145-166, 2001). Then, we applied the modified method to the superelevation range. Finally, we ensured safety using the Degree of Safety that is proven by the centrifugal acceleration ratio as suggested by Joseph Craus (1978). RESULTS : The mean running speeds are 50 km/h and 65 km/h when the design speeds are 40 km/h and 50 km/h, respectively. After the application of the new method used in this study, the superelevation will be increased by 9.0% and 10.0% when the mean running speeds are 50 km/h and 65 km/h, respectively. CONCLUSIONS : A higher superelevation can give the driver a more comfortable and safe driving environment. However, the driver needs to be aware of snow and low-temperature conditions.

• International Journal of Safety
• /
• 제5권1호
• /
• pp.1-4
• /
• 2006

The safety performance of the current collection system is evaluated by conducting a test run in which accelerometer and load cell signals are analyzed. It has been found that the current collection performance is strongly influenced by the train speed, with the major frequency components arising from the train traversing the span spacing and the 8.5 Hz component originating from the panhead resonance. The train acceleration is found to have significant influence on the span passing frequency but negligible effect on the resonant response.

• 해양환경안전학회지
• /
• 제9권1호
• /
• pp.57-63
• /
• 2003

해상교통시스템은 선박, 조선자, 선박과 조선자를 둘러싼 환경으로 구성되어 있다. 항행환경은 조선환경, 교통환경, 정보사회환경으로 분류하며, 항로설계는 조선환경의 일부를 설정하는 것이다. 본 연구는 항만설비 중 항로설계기준의 적정성을 확인하기 위하여 조선자의 입장에서 직선항로와 항로만곡부에서의 조선부담감을 정량적으로 평가한 것이다. 환경스트레스모델을 이용하여 대상항로에서 항로폭, 선박전장, 선속 등의 요소를 고려하여 선박조종 난이도를 평가하고, 그 상관관계를 구하였으며 조선부담의 경감방안을 제시하였다.

• 한국정밀공학회지
• /
• 제17권5호
• /
• pp.137-144
• /
• 2000

In this paper, a longitudinal control of the lead vehicle for a platoon in IVHS Regulation Layer is proposed. The backstepping method has been used for the controller design. This method has an advantage in that its stability need not be proven since the controller is designed based on the Lyapunov Function. The control object is that the lead vehicle tracks a reference velocity and maintains a safe distance between the inter-platoons while the followers are keeping the speed of the lead vehicle of a platoon. The coordinate of system is transformed to a new coordinate system for its convenience to design controller. The new coordinate system is composed of error and new error variable. The error is the difference between the safe distance and the actual distance of inter-platoons. A new error variable is the difference between the velocity of vehicle and the estimated state of a system operated by the virtual input. The Lyapunov function is obtained based on the variables of new coordinate system. In the computer simulation, several cases have been studied such as when the lead vehicle is tracking the optimal speed. or a lead vehicle of the following platoon tracks the velocity of the previous platoon while maintaining a safe distance. Also a nonlinear engine time constant case has been investigated. All the simulation results show that the designed controller satisfies the control object sufficiently.

• 한국ITS학회 논문지
• /
• 제6권1호
• /
• pp.27-37
• /
• 2007

과속단속시스템은 지능형교통체계(ITS)의 한 영역인 첨단교통관리시스템(ATMS)으로서 중요한 역할을 수행하고 있다. 그러나 과속사고를 방지하기 위해 설치된 시스템이 시거가 확보되지 않은 구간이나 급커브 지역 등에 설치됨으로써 추가적인 교통사고 위험을 내포하고 있다. 이에 본 연구에서는 고속도로의 기하구조별로 시스템 설치위치를 구분하고, 각 위치에서 발생한 교통사고 자료를 시스템 설치 전 후로 나누어 기하구조별 과속단속시스템의 설치 전 후의 사고건수(Frequency), 대물피해환산법(EPDO, Equivalent Property Damage Only)을 통한 사고심각도와 사고비용(Accident Cost)을 분석하였다. 이와 같은 연구수행 절차를 통해 시거가 충분히 확보되지 않는 구간에서의 과속단속시스템의 설치가 사고에 미치는 영향을 알아보고 최종적으로 과속단속시스템의 설치위치에 따른 영향을 분석하고자 한다.

• 한국소음진동공학회논문집
• /
• 제11권8호
• /
• pp.349-356
• /
• 2001

The dynamic behavior of high speed train is very Important because the railway should be safe and Is satisfied tilth the rode comfort of passengers. The train is composed of many suspension components. such as 1st springs, 1st dampers, 2nd springs and 2nd dampers, that have an influence on the dynamic characteristics of high speed train. Also, the wheel/rail shapes, the track conditions and geometry and many environmental factors, such as rain, snow and wind. affect the dynamic behavior of high speed train. This paper reviews the effect of wind and track conditions on the dynamic behavior of high speed train. The VAMPIRE program Is used for this simulation. The result of simulation shows that the high speed train should not be operated when the wind velocity is beyond 34.5 m/sec.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.495-500
• /
• 2001

The dynamic behavior of high speed train is very important because it should be safe and is satisfied with the ride comfort of passengers. The railway is composed of many suspension components-1st springs, 1st dampers, 2nd springs, 2nd dampers etc- that have an influence on the dynamic characteristics of high speed train. Also, the wheel/rail shapes, the track condition and geometry and many environmental factors-rain, snow, wind etc-are affected the dynamic behavior of high speed train. This paper is reviewed the effect of wind(gust) on the dynamic behavior of high speed train. Vampire program is used for this simulation. The result of simulation shows that high speed train should not be operated when the gust speed is beyond 34.5m/sec.

• 대한토목학회논문집
• /
• 제41권1호
• /
• pp.57-64
• /
• 2021

도시부도로에서 변속차로는 도로가 연결되는 지점에 설치되어 상대속도를 낮추도록 함으로써 교통소통을 원활하게 하고 있다. 그러나 도심내 안전 속도 "5030"시행에 따른 제한속도 30 km/h의 경우 기준이 모호하여 변속차로 설치에 대한 지적이 나오고 있다. 본 연구는 변속차로에 대한 이론적 고찰 후 안전속도 "5030" 정책 시행 예정 구간을 중심으로 변속차로 통행패턴을 사례조사를 실시하였다. 현장조사 후 도로조건 및 교통 조건 등에 따라 주도로의 통행 속도별 통행 패턴을 분석한 결과 안전속도 "5030"시행에 따른 변속차로의 실효성을 분석하였다. 본 연구수행을 통해 제시된 속도별 변속차로 설치기준은, 통행속도 30 km/h 구간인 경우는 변속차로를 미설치 하도록 하고, 50 km/h인 경우는 반드시 설치토록 하는 기준을 제시하였다. 향후 도시지역에서 다른 시설의 연결에 대한 공학적 기준을 정립할 때 참고할 수 있을 것으로 판단되며, 변속차로 설치 및 회전반경 확대를 통한 속도별 원활한 교통소통 및 안전성을 확보하고 개인의 사유재산권 행사에 대한 불필요한 제약을 최소화하는데 기여할 수 있을 것으로 기대된다.

• 한국항해학회지
• /
• 제23권2호
• /
• pp.23-27
• /
• 1999

When a ship is running in following and quartering seas and on a crest with the ship′s length being nearly the same as the wave length, ship′s stability will be lost most; "T" shape crests with highly concentrated energy will appear during the process of transformation from irregular waves to regular ones, and the ship may be under continuous impact of large waves for a long period of time; Synchronism will also appear when the ship′s natural period of rolling and period of encounter are close to each other. For safe navigation, proper stability should be well ensured, proper speed and course chosen with speed under 1.8L1/2 kn (L is the ship′s length), initial listing avoided, special attention paid to steering.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.539-545
• /
• 2009

KTX trains which began passenger service between Seoul and Busan in April 2004 have gained very high evaluation for their safe operation. Track is one of the most important means to keep KTX safety, it has not been a fail of safe structure. The track failure during operation may lead to a severe accident. So, it is to be verified the confidence of track maintenance management on the high speed line. This paper would like to find a track deformation trend through a comparative analysis on actual measurement data at these times. It discusses the effect of cyclic dynamic load at welding part. KTX dynamic impact load was measured in accordance with a rail surface irregularity and analyzed some track irregularities according to the condition of rail profile at welding part in the Gyeongbu high speed line.