• Fire Science and Engineering
• /
• v.28 no.3
• /
• pp.29-33
• /
• 2014

Cleanroom fires were simulated by using Fire Dynamics Simulator. A grid size of $0.5{\times}0.5{\times}0.2m^3$ was selected following review of grid sizes. Fires in three large cleanrooms were investigated to confirm safety by applying the requirements on temperature, visibility, and carbon monoxide concentration in performance based design. The worst situation without sprinkler system and air flow of 0.1 m/s downward in the cleamrooms was considered. It was confirmed that all the three cleanrooms were safe in case without sprinklers since the temperature was below the safety requirement. Decrease in visibility and carbon monoxide concentration due to the fires were negligible.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.104-112
• /
• 2013

This study investigates the structural analysis result with vibration and fatigue on 3 kinds of bicycle saddle models. When the static load applies on the upper plane of model, maximum stress becomes within the allowable stress in case of model 1. As the value of Stress or deformation becomes lower on the order of model types 1, 2 and 3, these models become more stabilized or safer at durability in this order. On the vibration analysis, model type 1 has the maximum stress or deformation more than 5 times by comparing with model type 1 or 2. Model type 1 becomes most excellent on vibration durability. As maximum displacement due to vibration happens in case of model type 3, it becomes unstabilized. But the stresses of model types 1, 2 and 3 become within the allowable stress and these models are considered to be safe. At the status of the severest fatigue load, model type 3 becomes safer than model type 1 or 2. This study result is applied with the design of safe bicycle saddle and it can be useful to improve the durability by predicting prevention against the deformation due to its vibration and fatigue.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.63-69
• /
• 2011

This study analyzes stress, fatigue and vibration on main rotor and body of helicopter. The maximum stress is shown on adjoint part between body and main rotor at the lower position of main rotor. As the maximum displacement amplitude is happened at 4000Hz, there is no resonance and the state of helicopter becomes safe at hovering without the abnormal air current and the disabled rotor. Among the cases of nonuniform fatigue loads, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'Sample History' with the average stress of 0MPa to $-10^5MPa$ and the amplitude stress of 0MPa to $8.539{\times}10^5MPa$, the possibility of maximum damage becomes 3%. This stress state can be shown with 5 times more than the damage possibility of 'SAE bracket history' or 'SAE transmission'. The structural result of this study by using the analysis of vibration and fatigue can be effectively utilized for safe and durable design of helicopter.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.2
• /
• pp.43-52
• /
• 2019

The recent technological developments of smart devices, multiple services are provided to enhance the users' quality of life including smart city, smart energy, smart car, smart healthcare, smart home, and so on. Academia and industries try to provide the users with convenient services upon seamless technological research and developments. Also, whenever and wherever a variety of services can be used without any limitation on the place and time upon connecting with different types of devices. However, security weaknesses due to integrations of multiple technological elements have been detected resulting in the leakage of user information, account hacking, and privacy leakage, threats to people's lives by device operation have been raised. In this paper, safer communication framework is suggested by device control and user authentication in the mobile network environment. After implementations of registration and authentication processes by users and devices, safe communication protocol is designed based on this. Also, renewal process is designed according to the safe control of the device. In the performance evaluation, safety was analyzed on the attack of protocol change weakness occurred in the existing system, service halt, data leakage, illegal operation control of message, and so on, which confirmed the enhanced speed approximately by 8% and 23% in the communication and verification parts, respectively, compared to the existing system.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.11a
• /
• pp.479-482
• /
• 2008

The purpose of this study is a proposal about the flexibility of the performance category to revitalize the "Housing Performance Grading Indication System". This system consists of 5 main performance parts, 14 performance categories and 20 detailed performance lists. 5 main performance parts are Noise and Acoustics(Light-weight impact sound control, heavy-weight impact sound control, sound control of toilet, sound control of party wall), Long-life(flexibility, remodeling & maintenance, durability), Landscape & Indoor Environment(landscape, formaldehyde control& ventilation, daylighting, thermal environment), Welfare & Barrier-free(playground and community center, welfare space, barrier-free design), Fire Safety(fire safety, safe place, fire-resisting quality). The flexibility of the performance category is conformed to Long-life housing related grading and can realize the Long-life housing in response to resident needs about the space rearrangement. Now, The flexibility of the performance category is limited to the evaluation of the private space, that is, the Skeleton evaluation. This study would suggest alternatives to improve uppermost limits through analyzing 60 examples from January 9th 2009 to October 30th 2008. The flexibility of the performance category is possible to estimate not only the Skeleton evaluation but also the Infill evaluation in response to social changes.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.1
• /
• pp.125-133
• /
• 2012

This study aims at structural analysis with fatigue on the shock absorber mount of automobile. Two kinds of mount as original model 1 and reinforced model 2 are applied. Among the cases of nonuniform fatigue loads at both models, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'SAE bracket history' or 'SAE transmission', the maximum fatigue life at model 2 is 5 to 6 times as much as model 1 and the minimum damage at model 2 is decreased 5 to 6 times as much as model 1. In case of 'Sample history' as slow fatigue loading history, the minimum damage at model 2 becomes same as model 1 but the maximum fatigue life at model 2 is decreased more than 17 times as much as model 1. In case of 'Sample History' with the average stress of -$10^4MPa$ to $10^4MPa$ and the amplitude stress of 0MPa to $10^4MPa$, the possibility of maximum damage becomes 3%. This stress state can be shown with 5 times more than the damage possibility of 'SAE bracket history' or 'SAE transmission'. Safe and durable design of shock absorber can be effectively improved by using this study result on mount frame.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.1
• /
• pp.49-58
• /
• 1997

The membrane type LNG tank is non self-supporting tank which consists of both primary and secondary membrane supported through the insulation boxes by the adjacent hull struc¬ture. Although the membranes are not structural member. They are subject to periodical cyclic loads due to the thermal expansion and other expansions or contraction of membrane. At the design stage of the tank, an analytical and experimental approach on the fatigue strengths of membrane and its welds is necessary in order to assist the designer and the inpector. In this study the evaluation method of fatigue strength of membrane type LNG tank is pre¬sented with FEM analysis and fatigue test of lap welds and it contains the following:1) The fatigue tests and preparation of design S - N curve for lap welds 2) FEM analysis of test specimens 3) Estimation of cumulative damage factor of lap welds 4) Guideline for inspection of lap welds of membrane type LNG tank As the results of analytical and experimental approaches in this study, the evaluation method of fatigue strengths of membrane type LNG tank is proposed, which is expected to be useful for design and inspection of membrane type LNG tank.

• Resources Recycling
• /
• v.18 no.3
• /
• pp.11-19
• /
• 2009

Recently the problem of global environment is became by social issue. Accordingly the interests to recycling and saving of resources are growing from daily life to varieties field of industry. To preserve the global environment, prevent global warming, environmental destruction, environmental pollution by wastes, the drain of aggregate, plasticity energy of cement and decrease in carbon dioxide are an urgent problem that must be resolved. So there is to a field of building industry and stands but on the inside of the building the many double meaning resources usefully, applies. Also the seller masterpiece building where the service life is long planned is safe and comfortably, maintenance, suppresses the construction which is not necessary is unnecessary. Also the seller masterpiece building where the service life is long planned is safe and comfortably, maintenance, suppresses the construction which is not necessary is unnecessary. By revitalizing effective use of limited earth resources, recycling and controling production of construction waste, this study introduced to a method for Long-Term Durability of Construction Structure and Effective Use of Technology for Construction Waste considering architectural demand and earth environment. It is for reduction of an earth environment load from the side of construction production and performance design of a structure.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.2
• /
• pp.135-148
• /
• 2005

In the stage of conceptual design for the construction and operation of the geologic repository for radioactive wastes, it is important to consider a repository ventilation system which serves the repository working environment, hygiene & safety of the public at large, and will allow safe maintenance like moisture content elimination in repository for the duration of the repositories life, construction/operation/closure, also allowing safe waste transportation and emplacement. This paper describes the possible ventilation system design criteria and requirements for the prospective Korean radioactive waste repositories with emphasis on the underground rock cavity disposal method in the both cases of low & medium-level and high-level wastes. It was found that the most important concept is separate ventilation systems for the construction (development) and waste emplacement (storage) activities. In addition, ventilation network system modeling, natural ventilation, ventilation monitoring systems & real time ventilation simulation, and fire simulation & emergency system in the repository are briefly discussed.

• Journal of the Korea Furniture Society
• /
• v.28 no.1
• /
• pp.16-26
• /
• 2017

In today's aging society, stable residential environment is essential for the elderly living alone to be able to do activities of daily living without restrictions and cherish a satisfactory quality of life. We developed a safe and convenient multifunctional sofa by removing complex combinations and decomposing processes of the multifunctional transformable furniture, appropriate for the use by elderly living alone. We deduced the 4 main keywords and details related to the purpose of sofa by analyzing the users' physical and mental characteristics through literature review and by using 24-hour scheduling, interviews, and actual measurement. Finally, by applying this to furniture planning, we designed 4 different types of multifunctional sofa system. Production was done in cooperation with AND Co. for 2 weeks using materials, colors and adhesives selectively chosen with careful consideration of their effects on the physical, mental aspects of the user to give optimal comfortability.