• 한국압력기기공학회 논문집
• /
• 제7권3호
• /
• pp.30-39
• /
• 2011

URANUS (Ubiquitous, Robust, Accident-forgiving, Non-proliferating, Ultra-lasting and Sustainer) has been developed with 35MWe (100MWth) operating without primary coolant pump, capitalizing on natural circulation capability of lead-bismuth eutectic (LBE) for long-life small and robust power units. To ensure the structural integrity, the large safety margin against Safe Shutdown Earthquake, 0.3g, and furthermore the cost effectiveness for URANUS, three-dimensional seismic base isolation design has been developed. The analytical model has been developed and seismic time history analyses have been carried out. The advantage for using three-dimensional seismic base isolation for URANUS has been discussed.

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.51-57
• /
• 2012

This study investigates structural and fatigue analyses at bicycle pedal. Maximum deformation at model 1 is 2 times as much as model 2 at static analysis. Models 1 and 2 have the possibility of the weakest strength at the part of contact with chain gear. Among the cases of nonuniform fatigue loads at Models 1 and 2, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'Sample history' with the average stress of 0 to $-10^4$ MPa and the amplitude stress of 0 to $10^4$ MPa, the possibility of maximum damage becomes 4%. This stress state can be shown with 5 to 7 times more than the damage possibility of 'SAE bracket history' or 'SAE transmission'. The analysis result of this study can be effectively utilized with the safe design of pedal.

• 한국컴퓨터정보학회논문지
• /
• 제20권11호
• /
• pp.63-68
• /
• 2015

In this paper, we propose a new energy efficient scheme which can prolong the life of sensor networks, it should be able to reduce the number of sensing. We use the concept of safe zone for manage the appropriate range of properties. We measure the distance between the sensed temperature value and the center of the zone, and calculate the next sensing interval based on this distance. We name our proposed scheme "VIS". To assess the performance of the proposed scheme the actual temperature data was collected using the sensor node. The algorithm was implemented through the programming and was evaluated in a variety of settings. Experimental results show that the proposed algorithm is to significantly reduce the number of sensing in terms of energy efficiency while having the ability to know the state of the sensor nodes periodically. Our VIS algorithm can be useful in applications which will require the ability of control to the temperature within a proper range.

• International Journal of Advanced Culture Technology
• /
• 제9권4호
• /
• pp.320-328
• /
• 2021

As the number of visually impaired people steadily increases, interest in independent walking is also increasing. However, there are various inconveniences in the independent walking of the visually impaired at present, reducing the quality of life of the visually impaired. The white cane, which is an existing walking aid for the visually impaired, has difficulty in recognizing upper obstacles and obstacles outside the effective distance. In addition, it is inconvenient to cross the street because the sound signal to help the visually impaired cross the crosswalk is lacking or damaged. These factors make it difficult for the visually impaired to walk independently. Therefore, we propose the design of an embedded system that provides traffic light recognition through object recognition technology, voice guidance using TTS, and upper obstacle recognition through ultrasonic sensors so that blind people can realize safe and high-quality independent walking.

• 한국자동차공학회논문집
• /
• 제22권6호
• /
• pp.68-74
• /
• 2014

This study analyzes structural stress and fatigue about three types of automotive wheels. As maximum equivalent stresses at 1, 2 and 3 types become lower than the yield stress of material and deformations become minute, theses types are thought be safe on durability. Type 2 model has the most fatigue life among three kinds of types and the rest of models with fatigue lives are shown in the order of type 1 and 3. As the most fatigue frequency of type 2 model happens at the state of average stress and amplitude stress on the stress range narrower than type 1 or 3, type 2 model becomes most stable. In case of type 2 with the state near the average stress of 0 MPa and the amplitude stress of 300MPa, the possibility of maximum damage becomes 30%. This stress state can be shown as the most damage possibility. These study results can be effectively utilized with the design on automotive wheel by anticipating and investigating prevention and durability against its damage.

• 한국인공지능학회지
• /
• 제4권1호
• /
• pp.8-10
• /
• 2016

These days, citizens have a lot of ways to get access to IT. In the past, they tended to neglect IT that was thought to be difficult. But, currently, everyone can manufacture and get access not only software but also hardware when he has an idea. Arduino is used. Rinnai had recently released new product named Smart Sensor Range. Safe consumer who gave priority to the safety made new trend gave attention to fire prevention and smart sensor range. The ones who buy gas range prefer safety to economic advantage and/or fire power. The safety system does not always prevent fire accident. This study makes design and produces alarm that perceives temperature of pot when boiling. Not only temperature sensor but also alarm sensor was used to make alarm of boiling water and to give convenient living life. The arduino can be used at practical life to make products for various kinds of people. The invention can give convenience to housewives at kitchen, children and many persons making use of gas range. Another function can be added to develop. This arduino can develop a lot of products by using the study and other designs.

• 국제초고층학회논문집
• /
• 제1권3호
• /
• pp.181-194
• /
• 2012

Chile is characterized by the largest seismicity in the world which produces strong earthquakes every $83{\pm}9years$ in the Central part of Chile, where it is located Santiago, the capital of Chile. The short interval between large earthquakes magnitude 8.5 has conditioned the Chilean seismic design practice to achieve almost operational performance level, despite the fact that the Chilean Code declares a scope of life safe performance level. Several Indexes have been widely used throughout the years in Chile to evaluate the structural characteristics of concrete buildings, with the intent to find a correlation between general structural conception and successful seismic performance. The Indexes presented are related only to global response of buildings under earthquake loads and not to the behavior or design of individual elements. A correlation between displacement demand and seismic structural damage is presented, using the index $H_o/T$ and the concrete compressive strain ${\varepsilon}_c$. Also the Chilean seismic design codes pre and post 2010 Maule earthquake are reviewed and the practice in seismic design vs Performance Based Design is presented. Performance Based Design procedures are not included in the Chilean seismic design code for buildings, nevertheless the earthquake experience has shown that the response of the Chilean buildings has been close to operational. This can be attributed to the fact that the drift of most engineered buildings designed in accordance with the Chilean practice falls below 0.5%. It is also known by experience that for frequent and even occasional earthquakes, buildings responded elastically and thus with "fully operational" performance. Taking the above into account, it can be said that, although the "basic objective" of the Chilean code is similar to the SEAOC VISION2000 criteria, the actual performance for normal buildings is closer to the "Essential/Hazardous objective".

• 한국터널지하공간학회 논문집
• /
• 제22권5호
• /
• pp.529-541
• /
• 2020

기계화터널시공의 대표적인 장비인 TBM의 커터헤드는 타 장비에 비해 굴착 중 발생하는 하중이 매우 크며, 마모가 발생하여 단면이 손실되는 작업환경을 가지고 있어 피로파괴에 의한 설계검토가 필요하지만, TBM커터헤드에 대한 피로해석을 수행한 사례는 찾기 어렵다. 본 연구에서는 직경 8.2 m인 커터헤드를 대상으로 안전수명설계 개념으로 S-N커브를 이용하여 응력-수명 설계 검토를 수행하였다. 또한 건설장비의 피로설계방법과 피로손상도를 평가하는 방법에 대해 소개하고 직경 8.2 m의 TBM 커터헤드를 대상으로 피로해석을 수행한 결과를 설명하였다. S-N curve는 피로 설계를 하는 데에 있어서 핵심적인 역할을 하는 것을 알 수 있었으며, 피로 하중을 받고 있는 구조물이 현재 시점에서 어느 정도의 피로 손상을 받고 있는지를 평가하는 데에도 사용될 수 있다. 앞으로 건설장비에서도 장비를 사용하는 동안 어떤 시점에서 피로문제가 발생하는지와 장비의 안전 점검은 언제 실시하는 것이 효과적인지 등에 대한 정보를 파악하는 안전수명설계 개념을 도입하는 것이 필요하다.

• 한국조경학회지
• /
• 제34권2호
• /
• pp.80-98
• /
• 2006

This study originated from following questions. What can we understand the conception of deconstruction, which has been the core idea of new discourses developed in various ways since modernism? How can this question be interpreted in landscape design? What is the conceptional frame of integration the prominent hybrid post-genre movements and phenomena? The frame can be epitomized with the deconstruction phenomenon. 'Deconstruction' is the core conception appeared in late or post-modern ages in the embodiment of modernity and can be viewed as an integrating or a hybrid phenomenon between areas or genres in formative arts. Therefore, the author regards the hybrid movements widely witnessed in the post contemporary formative arts as one of the most important indicators of de-constructive signs. It is safe to say that the phenomenon of this integration or hybridism, of course, does not threaten the identity of landscape design but serves as an opportunity to extend the areas of landscape design. One of the consequences of this integration or hybridism is the voluntary participation of users who have been alienated in the production of the meanings of design works and hybrid landscape design with the hybridization of genres that is characterized with transformation in forms. This view is based on the distinction between hybridization of interactions between the designer (the subject) and the user (the object), and hybridization of synesthesia. Generally speaking, this is an act of destroying boundaries of the daily life and arts. At the same time, it corresponds to vanishing of modern aesthetics and emerging of post-contemporary aesthetics which is a new aesthetic category like sublimeness. This types of landscape design tries to restore humans' sensibility and perceptions restrained by rationality and recognition in previous approach and to express non-materialistic characteristics with precaution against excessive materialism in the modern era. In light of these backgrounds, the study aims to suggest the hybrid concept and to explorer a new landscape design approach with this concept, in order to change the design structure from 'completed' or 'closed' toward 'opened' and to understand the characteristics of interactions between users and designs. This new approach is expected to create an open-space integrating complexity and dynamics of users. At the same time, it emphasizes senses of user' body with synesthesia and non-determination. The focus is placed on user participation and sublimity rather than on aesthetic beauty, which kind of experience is called simulacre. By attaching importance to user participation, the work got free from the material characteristics, and acceptance from the old practice of simple perception and contemplation. The boundaries between the subject and object and the beautiful and ordinary, from the perspective of this approach, are vanished. Now everything ordinary can become an artistic work. Western dichotomy and discrimination is not effective any more. And there is 'de-construction' where there is perfect equality between ordinary daily life and beautiful arts. Thus today's landscape design pays attention to the user and uses newly perceived sensitivity by pursing obscure and unfamiliar things rather than aesthetic beauty. Space is accordingly defined to take place accidentally as happening and event, not as volume of shape. It's the true way to express spatiality of landscape design. That's an attempt to reject conventional concepts about forms and space, which served as the basis for landscape design, and to search for new things.

• Smart Structures and Systems
• /
• 제17권6호
• /
• pp.995-1015
• /
• 2016

In the design and condition assessment of bridges, it is usually necessary to take into consideration the extreme conditions which are not expected to occur within a short time period and thus require an extrapolation from observations of limited duration. Long-term structural health monitoring (SHM) provides a rich database to evaluate the extreme conditions. This paper focuses on the extrapolation of extreme traffic load effects on bridges using long-term monitoring data of structural strain. The suspension Tsing Ma Bridge (TMB), which carries both highway and railway traffic and is instrumented with a long-term SHM system, is taken as a testbed for the present study. Two popular extreme value extrapolation methods: the block maxima approach and the peaks-over-threshold approach, are employed to extrapolate the extreme stresses induced by highway traffic and railway traffic, respectively. Characteristic values of the extreme stresses with a return period of 120 years (the design life of the bridge) obtained by the two methods are compared. It is found that the extrapolated extreme stresses are robust to the extrapolation technique. It may owe to the richness and good quality of the long-term strain data acquired. These characteristic extremes are also compared with the design values and found to be much smaller than the design values, indicating conservative design values of traffic loading and a safe traffic-loading condition of the bridge. The results of this study can be used as a reference for the design and condition assessment of similar bridges carrying heavy traffic, analogous to the TMB.