• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.149-156
• /
• 2011

Considerable evaluation is needed to design a new longitudinal tunnel in advance because it damaged drivers' driving safety and heightened the possibility of traffic accidents with its physical characteristics. Specifically, considering traffic psychological and ergonomic factors was very important to prevent the difficulty of maintaining safe speed, the increase of the drowsy driving, the fatality of traffic accidents, and subjective feelings such as anxiety while driving a car through the tunnel, from design to construction. This study dealt with driving safety evaluation of an original road alignment design for the longitudinal tunnel (length: above 10km) with a driving simulator, and helped us to improve an original road alignment design and make an alternative road alignment design with presenting risky districts. The results of experiment showed that inflection points were revealed more risky districts, because they impaired driving safety and elevated driver workload while driving a car through around the inflection points of two-way route. Finally, the limitations and implications of this study were discussed.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.3
• /
• pp.383-391
• /
• 2010

The present study evaluated a preliminary control room (CR) design of radioactive waste facility using the $JACK^{(R)}$ human simulation system. Four digital humanoids ($5^{th}$, $50^{th}$, $95^{th}$, and $99^{th}$ percentiles) were used in the ergonomic evaluation. The first three were selected to represent 90% of the target population (Korean males aged 20 to 50 years) and the last to reflect the secular trend of stature for next 20 years in South Korea. The preliminary CR design was assessed by checking its compliance to ergonomic guidelines specified in NUREG-0700 and conducting an in-depth ergonomic analysis with a digital prototype of the CR design and the digital humanoids in terms of postural comfort, reachability, visibility, and clearance. For identified design problems, proper design changes and their validities were examined using JACK. A revised CR design suggested in the present study would contribute to effective and safe operations of the CR as well as operators' health in the workplace.

• Journal of the Korean housing association
• /
• v.25 no.3
• /
• pp.45-52
• /
• 2014

Adolf Loos and Hiroshi Hara are very well known for their distinctive method of spatial composition. Adolf Loos showed white silent outer facades from his strong aversion to the ornament, whereas dynamic and rich inner space by the principle called 'Raumplan' in his housing design. Hiroshi Hara, one of the most influential architects in modern Japanese architectural history, designed a series of controversial houses with radical design by his 'Yukotai Theory' and the thought of 'Reflection House'. Even they have no common in regional background or the period of their works, both similarly have shown their own focus on cladding surface as an important design language. From this point of view, this paper investigates the design method of those two architects focused on the similar points and also the differences of their approaches to cladding in housing design. In conclusion, in case of Adolf Loos, the cladding is a tool to create completely safe and pure inner space by separating from the outside. On the other hand, the cladding of Hiroshi Hara has the meaning of social ideology that individuals must follow the principles of a dominant structure, which is the reason why the cladding should be removed. However there exists something in common also. They radically denied the outer circumstances and had a firm belief that the requests from the inside living space were the more influential factors.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.14-23
• /
• 2013

Fault management design of the satellite describes preparations for failures which can occur during operational phase. Fault management design contains detection and isolation function of anomaly, and also it contains function to maintain the satellite in safe condition until the ground station finds out a cause of failure and takes a countermeasure. Unlike normal operation, safing operation is automatically performed by Power Control and Distribution Unit and Integrated Bus Management Unit which loads Flight Software without intervention of ground station. Since fault management operation is automatical, fault management logic and functionality of relevant hardware should be thoroughly checked during ground test phase, and error which is similar to actual should be carefully applied without damage. Verification test for fault management design is conducted for various subsystems of satellite. In this paper, we show the design process of fault management design verification test for Electrical Power Subsystem and Attitude and Orbit Control Subsystem of Low Earth Orbit satellite flight model and the test results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1331-1337
• /
• 2013

This study deals with the structural optimization of hybrid vertical-axis wind turbine blades using a response surface method (RSM). The structural analysis results suggest that the stress of hybrid vertical-axis wind turbine blades exceeds the yield strength. Optimization techniques are then applied to structural design to ensure a safe structure. First, the design factors that strongly influence the structural response are identified. The RSM was applied based on the design of experiments. The objective function and constraint terms set the weight and allowable stress, respectively. Furthermore, sensitivity analysis was conducted to indicate the effects of the design factors on the stress and weight. Finally, structural design was performed for the hybrid vertical-axis wind turbine blade.

• Smart Structures and Systems
• /
• v.17 no.6
• /
• pp.995-1015
• /
• 2016

In the design and condition assessment of bridges, it is usually necessary to take into consideration the extreme conditions which are not expected to occur within a short time period and thus require an extrapolation from observations of limited duration. Long-term structural health monitoring (SHM) provides a rich database to evaluate the extreme conditions. This paper focuses on the extrapolation of extreme traffic load effects on bridges using long-term monitoring data of structural strain. The suspension Tsing Ma Bridge (TMB), which carries both highway and railway traffic and is instrumented with a long-term SHM system, is taken as a testbed for the present study. Two popular extreme value extrapolation methods: the block maxima approach and the peaks-over-threshold approach, are employed to extrapolate the extreme stresses induced by highway traffic and railway traffic, respectively. Characteristic values of the extreme stresses with a return period of 120 years (the design life of the bridge) obtained by the two methods are compared. It is found that the extrapolated extreme stresses are robust to the extrapolation technique. It may owe to the richness and good quality of the long-term strain data acquired. These characteristic extremes are also compared with the design values and found to be much smaller than the design values, indicating conservative design values of traffic loading and a safe traffic-loading condition of the bridge. The results of this study can be used as a reference for the design and condition assessment of similar bridges carrying heavy traffic, analogous to the TMB.

• Journal of the Korean Society of Tobacco Science
• /
• v.24 no.1
• /
• pp.67-73
• /
• 2002

In light of addressing consumer health concern, coping with anti-tobacco movement, and promoting new product, tobacco industry is actively pursuing to make a new generation of cigarettes with low tar and nicotine deliveries, and less harmful substances. Low tar and low nicotine cigarettes increases their market shares dramatically world wide, especially in KT&G, multinational tobacco companies, EU countries, even in China regulated by CNTC to set up yearly target to lower tar and nicotine deliveries. On the other hand, to design a new cigarette with reduced harmful substances begins to gain speed. The "modified Hoffmann list" publishes thirty plus substances in tobacco leaf and main smoke stream, which is the prime suspect causing health problems. Various ways and means are developed to reduce such components including new tobacco breeds, new curing method, tobacco leaf treatment before processing, selected filtration system, innovated casing system to reduce free radicals, as well as some non conventional cigarette products. In TSRC held this year, the main topic is related to reduce tobacco specific nitrosamines in tobacco leaf. The new generation of cigarette is in the horizon. It still needs a lot help to produce commercial products with satisfied taste and aroma characters. The flavor industry is not regulated by many governments demanding which ingredients might or might not be for tobacco use. However, most of the cigarette companies self impose a list of ingredients to guide flavor suppliers to design flavors. Unfortunately, the number of ingredients in those lists is getting shorter every year. It is understandable that the health is not the only reason. Some cigarette companies are playing safe to protect the company from potential lawsuit, while others are just copying from their competitors. Moreover, it is obvious that it needs more assistance from casings and flavors to design new generation of cigarettes with missing certain flavor components in tobacco leaf and main smoke stream. These flavor components are either non-existed or at lower level at new form of cured tobacco leaf or filtered in the main smoke stream along with reduced harmful substances. The use of carbon filters and other selected filtration system poses another tough task for flavor system design. Specific flavor components are missing from the smoke analysis data, which brings a notion of "carbon taste" and "dryness" of mouth feel. It is ever more demanded by cigarette industry to flavor suppliers to produce flavors as body enhancer, tobacco notes, salivating agents, harshness reducer, and various of aromatic notes provided they are safe to use. Another trend is that water based flavor or flavor with reduced ethanol as solvent is gaining popularity. It is preferred by some cigarette companies that the flavor is compounded with all natural ingredients or all ingredients should he GMO free. The new generation of cigarettes demands many ways of new thinking process. It is also vital for tobacco industry. It reflects the real needs for the consumers that the cigarette product should be safe to use as well as bearing the taste and aroma characters smokers always enjoyed. An effective tobacco flavor system is definitely a part of the equation. The global trend of tobacco industry is like trends of any other industries lead by consumer needs, benefited with new technology availability, affected by the global economy, and subjected for various rules and regulations. Anti-tobacco organizations and media exceptionally scrutinize cigarette, as a legal commercial product. Cigarette is probably the most studied commercial product for its composition, structure, deliveries, effects, as well as its new developmental trend. Therefore, any new trend of cigarette development would be within these boundaries. This paper is trying to point out what it would be like for tobacco industry in the next few yews and what concerns the tobacco industry. It focuses mostly on the efforts to produce safer cigarettes. It is such a vital task for the tobacco industry and its affiliate industries such as cigarette papers, filters, flavors, and other materials. The facts and knowledge presented in this paper might be well known for the public. Some of the comments and predictions are very much personal opinion for a further discussion.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.2
• /
• pp.189-198
• /
• 2013

Objective: This research was carried out to study the menu type design of instrument cluster IVIS(In Vehicle Information System) for efficient navigation under deconcentrated situations. Background: A driver controls the IVIS menu using the rest of cognitive resources while driving a car. Although a driver controls the IVIS using extra cognition resources, his or her distraction can still cause some safety problems while driving. Menu type design of instrument cluster is absolutely important for safe and efficient navigation. Method: Four menu types including paging, flow, icon, and list type were identified through reviewing the existing IVIS of vehicle and the menu structure of cellular phone. Four menu types were evaluated through experiment. The experiment consisted of primary and secondary task, which the primary task was to simulate a driving and the secondary task was to control an IVIS menu prototype. Task performances, menu type preferences, and eye-movement patterns were measured in this experiment. Results: The result shows that icon type was the best design in aspect of task performance and preference. A clue for next menu item provided a positive effect for efficient menu navigation. It was identified that most of subjects gazed the middle-top area of IVIS screen from eye-movement pattern. Conclusion: A basic design of Instrument Cluster IVIS was proposed considering the result of this study in the final. Application: The results of this study can be effectively used in the design of Instrument Cluster IVIS.

• Convergence Security Journal
• /
• v.11 no.4
• /
• pp.43-49
• /
• 2011

Web-based health information provides a lot of conveniences, however the security vulnerabilities that appear in the network environment without the risk of exposure in the use of information are growing. Web-based medical information security issues when accessing only the technology advances, without attempting to seek a safe methodology are to increase the threat element. So it is required. to take advantage of web-based information security measures as a web-based access control security mechanism-based design. This paper is based on software architecture, design, ideas and health information systems were designed based on access control security mechanism. The methodologies are to derive a new design procedure, to design architecture and algorithms that make the mechanism functio n. To accomplish this goal, web-based access control for multiple patient information architecture infrastructures is needed. For this software framework to derive features that make the mechanism was derived based on the structure. The proposed system utilizes medical information, medical information when designing an application user retrieves data in real time, while ensuring integration of encrypted information under the access control algorithms, ensuring the safety management system design.

• Archives of design research
• /
• v.15 no.1
• /
• pp.267-277
• /
• 2002

Change in outdoor life style caused by expanded opportunities of leisure time and promotion of welfare for the people had a great influence m the activation of the environment maintenance project. Pleasant and prosperous city environment confers independent cultural value that reflects character of the regions on the city. In addition, an attempt to make the environment of the city tour resources has been accepted, through which each local government established a city plan to promote the project. To make outdoor life safe, healthful, pleasant and effective for the people the design should give cultural character to the space of utility and be appropriate for the life style of the region. However, more organized studies on the design and its development examples are require. This study summarizes examples of the developed design by selecting eight types of outdoor furniture necessary for the Gwangju No.1 Subway Line that is to be open at the late 2003.