• The Journal of the Korean bone and joint tumor society
• /
• 제9권1호
• /
• pp.31-37
• /
• 2003

Introduction: The purpose of this study is to assess the efficacy of calcium sulfate as a bone graft substitute in the treatment of benign bone tumor. Materials and Method: Between December 2000 and November 2001, 18 patients with a benign bone tumor were treated with crettage and the defects were filled with calcium sulfate (Osteoset$^{(R)}$:Wright Medical Co. USA) as a bone graft substitute. Average age was 28.4 years and mean follow up period was 12.3 months. Calcium sulfate mixed with autograft was used in 6 cases, calcium sulfate with allograft in 2 cases, and calcium sulfate alone was used in 10 cases. The degree of absorption of calcium sulfate and new bone formation at plain radiograph was analyzed at immediate postoperative and postoperative 3 months and 6 months follow up. Results: At 3 months postoperatively, 92% of calcium sulfate was absorbed, and at 6 months postoperatively, 89% of new bone formation was observed. There was no difference in the resorption and new bone formation between the group using bone graft and the group osteoset$^{(R)}$ alone, different preoperative diagnosis and even different locations. There was no complication. Conclusion: Calcium sulfate(Osteoset$^{(R)}$) is a safe and effective bone graft substitute in the treatment of benign bone tumors, especially for the children in whom autograft is not recommandable.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제18권11호
• /
• pp.16-22
• /
• 2017

This study examined the status of resident evacuation sites notified to nearby communities, centered on business sites subject to the risk management plan of Incheon, Siheung, and Ansan. Through an analysis of the meteorological data, the direction of improvement of the site selection process for the safe evacuation of chemical accidents was studied. Among a total of 111 evacuation sites, 30 schools were selected the most, and 2-3 sites were usually selected for evacuation. As a result of an analysis of the Incheon meteorological data of 2016, the frequency of occurrences was 18.8525% in the NNE wind direction, 18.0328% in the NNW wind direction, 12.2951% in the WSW wind direction, 9.0164% in the SSE direction, 8.4700% in the SW direction, 6.5574% in the W direction, and 5.7376% in the S direction. The NNE wind direction showed the highest frequency, but the other winds showed a relatively high frequency, indicating that the annual wind direction was not biased toward one side.

• Journal of Korean Society of Environmental Engineers
• /
• 제33권4호
• /
• pp.258-266
• /
• 2011

Scale induced by hardness materials in water must be controled because of it can be result in remarkable damages of pipeline as well as water quality deterioration. Especially hot water system is one of scale management required facility as scale formation can be accelerated by temperature. The scale control performance of frequency driver (FD) was tested instead of existing methods such as chemical, physical and electromagnetic methods which needs chemicals and electric power. Three kinds of pipe coupons were submerged in test water with 500 mg/L of hardness for 33 days and XRD and SEM were analysed for comparing scale formation characteristics of these coupons. Calcite ($CaCO_3$) which came from hardness of water was formed on only cast iron pipe coupon and this coupon showed higher corrosion rate than copper and stainless steel pipe coupon. Hot water circulating system connected cast iron pipe with and without FD was operated with 300 mg/L of hardness water at $50^{\circ}C$ for monitoring of scale formation and water quality with and without FD. XRD showed that FD leaded to magnetite ($Fe_3O_4$) scale which is good scale for preventing corrosion than calcite and SEM image also indicated the scale control effect of FD. Scales of 16% on pipe joint, 14% on pipe length, and 42% on heat exchanger decreased with FD comparing scales of those parts without FD. From the results of water quality, FD reduced crystallization of hardness material without chemical reaction in water and it can indicate that FD is safe and proenvironmental technology for scale reduction.

• Food Science of Animal Resources
• /
• 제28권3호
• /
• pp.373-389
• /
• 2008

This study was conducted to evaluate exposure level and risk of heavy metals in livestock foodstuffs and Korean foods. Based on the "Food Intake Data," a part of the 2005 National Health & Nutrition Survey and the "2005 Seasonal Nutrition Survey", 113 Korean foods items were selected. 3 samples from different manufacturers of each 113 items of Korean foods were purchased on summer and fall, so total 678 samples were used. The food groups were classified into 15 categories. For the livestock foodstuffs category, meats and poultry (chicken, pork, pork belly, beef, beef feet soup), milks and dairy products (milk, ice cream, liquid yoghourt, sherbet), eggs (egg) were selected. It was found that the daily amount of heavy metals intake (mg/person/day) from livestock foodstuffs is 0.00020 arsenic, 0.00000 cadmium, 0.00020 lead, and 0.00006 mercury, and the daily amount of heavy metals intake (mg/person/day) from Korean foods is 0.0265 arsenic, 0.0083 cadmium, 0.0067 lead, and 0.0028 mercury. Daily amount of heavy metals intake from livestock foodstuffs was low among the food groups. For risk assessment, PDI (Probable Daily Intake) was calculated and compared with PTWI (Provisional Tolerable Weekly Intake) of JECFA (Joint FAO/WHO Expert Committee on Food Additive). Relative hazard of these livestock foodstuffs was 0.006% in arsenic, 0.000% in cadmium, 0.085% in lead, and 0.149% in mercury. Relative hazard of Korean foods was 0.941% in arsenic, 14.676% in cadmium, 3.319% in lead, and 6.860% in mercury. Thus, livestock foodstuffs and Korean foods were as safe as satisfied with the recommended standards of JECFA.

• Clinics in Shoulder and Elbow
• /
• 제11권1호
• /
• pp.46-52
• /
• 2008

Purpose: This study examined the outcomes of reconstruction of the coracoclavicular ligaments with using two suture anchors and performing coracoacromial ligament transfer in patients with acromioclavicular dislocation. Material and methods: Forty patients with complete acromioclavicular dislocation were included in this study. According to the preoperative radiographs, 5 patients with AC dislocations were diagnosed as type III, 4 patients as type IV and 31 patients as type V. Two 3.5mm suture anchors with four strands of nonabsorbable sutures were separately placed on the anterolateral and posteromedial portion of the base of the coracoid process to stabilize the distal clavicle. The coracoacromial ligament was then transferred to the undersurface of the distal end of the clavicle for augmentation. Results: At a mean follow-up of 28 months, the average Constant score improved to 97 points. All the patients returned to normal life at an average of 3.2 months postoperatively. At the last follow-up, 37 patients achieved anatomical reduction and three patients showed complete redislocation. However, the clinical results of the patients with redislocation were satisfactory. Conclusion: Anatomical coracoclavicular reconstruction using two suture anchors and coracoacromial ligament transfer for treating complete acromioclavicular dislocation is a safe, effective procedure for restoring a physiologically stable acromioclavicular joint.

• Journal of the Korean Arthroscopy Society
• /
• 제13권1호
• /
• pp.39-45
• /
• 2009

Purpose: To investigate the outcome of arthroscopic treatment for the complications of knee arthroplasty and to evaluate the effectiveness of arthroscopy. Materials and Methods: We analyzed 25 patients who underwent arthroscopy to treat complications of knee arthroplasty between May 1992 and June 2008. Nineteen cases out of 25 had total knee arthroplasty (TKA) and the remaining 6 cases had unicompartmental knee arthroplasty (UKA). Before arthroscopy, physical examinations and radiographic evaluations were carried out to find out the causes of complications. Joint fluid aspiration and hematologic evaluation were added when infection was suspected. Results: Among the diagnosis at the time of arthroscopy, there were 11 cases of infection, 6 cases of stiffness due to adhesion and fibrosis, and 2 cases of soft tissue impingement in the cases of TKA. Among the cases of UKA, one for each case of meniscal tear, subluxation of mobile insert, hemarthrosis, cement loose body, soft tissue impingement, and stiff knee was found. Nine out of 11 patients who had infection were treated successfully with arthroscopy but the remaining 2 cases underwent revision arthroplasty. Seven patients with arthrofibrosis had improved range of motion from $65^{\circ}$ preoperatively to $105^{\circ}$ postoperatively. The others also showed successful results after arthroscopy. Conclusion: Arthroscopy to treat complications after knee arthroplasty was a safe and effective method when appropriate selection of patients was made.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제31권3호
• /
• pp.23-30
• /
• 2003

In this study, the various load cases by specified by the IEC61400-1 international specification and GL Regulations for the wind energy conversion system were considered, and a specific composite structure configuration which can effectively endure various loads was proposed. In order to evaluate the structure, the structural analysis for the composite wind turbine blade was performed using the finite element method(FEM). In the structural design, the acceptable configuration of blade structure was determined through the parametric studies, and the most dominant design parameters were confirmed. In the stress analysis using the FEM, it was confirmed that the blade structure was safe and stable for all the considerd load cases. Moreover the safety of the blade root joint with insert bolts, newly devised in this study, was checked against the design loads and also the fatigue loads. The fatigue life for operating more than 20 years was estimated by using the well-known S-N linear damage rule, the load spectrum and Spera's empirical equations. The full-scale static test was performed under the simulated aerodynamic loads. from the experimental results, it was found that the designed blade had the structural integrity. Furthermore the measured results were agreed with the analytical results such as deflections, strains, the mass and the radial center of gravity. The studied blade was successfully certified by an international institute, GL, of Germany.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• 제4권2호
• /
• pp.101-110
• /
• 2011

To describe the background, mechanism, clinical results and complications of prolotheapy based on the literature review. Prolotherapy is a minimally invasive injection-based treatment of chronic musculoskeletal pain, including ligament and joint laxity. The mechanism of this injection-based technique is to initiate a local inflammatory response with resultant tissue healing. The used proliferants are classified by bio-mechanism to act in three different ways as osmotic, irritants, and chemotatics. The most commonly used proliferant is hyperosmolar (10~25%) dextrose to act by osmotic rupture of cells. High resolution ultrasound imaging of musculoskeletal structure provide a more accurate diagnosis. Also ultrasound-guided intervention provides a more high efficacy and low rate of complications. The most common complication is local pain at the injected site, that is self-limited and good responsive to anti-inflammatory agents. Other complications are rare. It is reported that prolotherapy appears safe when performed by an experienced clinician. Prolotherapy has grown in popularity and has received significant recent attention. However there are limited evidence-based data supporting the indication and efficacy of prolotherapy in the treatment of chronic musculoskeletal pain or soft tissue injuries. Future studies are necessary to determine whether prolotherapy can play an independent and definitive role in a treatment for chronic musculoskeletal pain.

• Proceedings of the KWS Conference
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.100-100
• /
• 2009

This paper is concerned with numerical analyses of residual stresses in welds and material's susceptibility to stress corrosion cracking (SCC) for the primary piping system in nuclear power plants: Both the dissimilar metal weld (DMW) for stainless steel to low alloy steel joints and the similar metal weld (SMW) for forged stainless steel to cast stainless steel joints are considered. Thermal elasto-plastic analyses using the finite element method (FEM) are performed to predict residual stresses generated in fabrication welding and its related processes for both the DMW and SMW, including effects of quenching for cast stainless steel piping, machining of the DMW root, and grinding of the SMW root. As a result, the effect of quenching should be included in the evaluation of residual stresses in the SMW for the cast stainless steel piping. It is deemed that residual stresses in both the DMW and SMW would not affect the SCC susceptibility of the welds providing that the welding processes are completed without any weld repair on the inside wall of the joint. However, the grinding process if performed on the safe-end to piping weld, would produce a high level of residual stresses in the inner surface region and thus a stress improvement process (e.g. buffing) should be considered to reduce susceptibilities to SCC.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제24권5호
• /
• pp.433-441
• /
• 2006

With a development of electrical technology in recent, it is possible to measure distance without direct contact to object using laser which launched at instrument and reflect from object. Furthermore, the advent of non prism total station brought the increment of application in many fields including not only road, airport, and harbors but also measurement and monitoring of structural displacement in construction fields. In this study, therefore, to evaluate accuracy of non prism total station, accuracy was analyzed by measuring certain distance which classified by both certain materials and angle of reflection. By this method, the derived values were applied to topographical survey for the efficient applicability. According to a study, result value of non prism total station was satisfBctory regardless of material when the angle of reflection was 90 degrees. RMSE increased when the angle of reflection are gradually increased to acute angle. In result of regression analysis using certain distance which classified by both materials and angles of reflection, there is relationship between distance and angle of reflection, but material has no relevance to the result value. When carrying out general topographical survey, proper application of non prism total station will go far conducting safe and prompt survey at the dangerous site such a road which have lots of traffic flow and rock joint which have high angles of inclination.