• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.441-442
• /
• 2022

This is a study on the design and operation software development of an accident response support service for MASS(maritime autonomous surface ship) that provides accident response support information according to ship accident classification when a ship accident occurs due to the operation of MASS

• Journal of Technologic Dentistry
• /
• v.33 no.1
• /
• pp.65-77
• /
• 2011

Purpose: The purposes of this study were to provide information about safe actions during the practice of dental technology, promote belief in safe actions among the students of dental technology, and reinforce their knowledge about how to act safety. Methods: Open questions were asked to 120 sophomores majoring dental technology to understand the target group's belief about safe actions. Following the instructions by Ajzen & Fishbein, the collected data were grouped according to similar beliefs. Those beliefs of the highest frequency were given a priority and got to represent the belief level of the target group. Even with belief changes, however, they would not be able to practice safe actions if they had no knowledge about how to do safe actions. For desirable behavioral changes among the students, the students were then asked to discuss the current state of safety accidents and issues focusing on the materials and processes used in the practice and give presentations regarding the subjects to identify risk factors. Then the identified risk factors were used to devise the program contents so that the students could practice safe actions through accurate behavioral approaches and belief changes by educating them about how to act safely by the practice processes and the involved materials and devices. Results: Not only do the students of Dept. of Dental Technicians have difficulties with the complex practice processes while practicing to make dental prosthesis, but they are exposed to the risk of accidents as they're poor at dealing with the materials and devices. Although there is a definite need for accident prevention education programs before practice, the reality is that the school doesn't the schoosuch education. Based on the judgment that an education program designed to reinforce belief for behavioral changes would generate effgrams results, an education program was developed by applying the Theory of Planned Behavior(TPB). Along with their beliefs, the current state of accidents n. Basepractice, demand for safety education, and practice level of safe actions were used to device the contents of accident prevention education and to develop an accident prevention education program for dental technology. Conclusion: The study presents an accident prevention education program developed to reinforce dental technology students' beliefs and knowledge and to help them do safe actions during practice.

• International Journal of Highway Engineering
• /
• v.18 no.3
• /
• pp.127-134
• /
• 2016

PURPOSES : Low visibility caused by dark surroundings at nighttime affects the likelihood of accidents, and various efforts, such as installing road safety facilities, have been made to reduce accidents at night. Despite these efforts, the nighttime severity index (SI) in Korea was higher than the daytime SI during 2011-2014. This study determined the factors affecting daytime and nighttime accident severity through a discriminant analysis. METHODS : Discriminant analysis. RESULTS : First, drowsiness, lack of attention, and lighting facilities affected both daytime and nighttime accident severity. Accidents were found to be caused by a low ability to recognize the driving conditions and a low obstacle avoidance capability. Second, road conditions and speeding affected only the daytime accident severity. Third, failure to maintain a safe distance significantly affected daytime accident severity and nonsignificantly affected nighttime accident severity. The majority of such accidents were caused by rear-end collisions of vehicles driving in the same direction; given the low relative speed difference in such cases, the shock imparted by the accidents was minimal. CONCLUSIONS : Accidents caused by a failure to maintain a safe distance has lower severity than do accidents caused by other factors.

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.319-324
• /
• 2012

Vehicle safety communications is one among the important technologies in order to protect a car accident. For this, many protocols forwarding a safe message have studied to protect a chain-reaction collision when a car accident occurs. most of these protocols assume that the time of generating a safe message is the same as an accident's. If a node predicts some traffic hazard and forwards a safe message, a driver can response some action quickly. So, In this paper, we proposes a traffic hazard prediction algorithm using the communication technique. As a result, we show that the frame reception success rate of using our algorithm to the previous protocol improved about 4~5%.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.5-10
• /
• 2003

This paper is mainly concerned with the assessment of safe navigation between ships moving each other in restricted waterways. The manoeuvring simulation was conducted parametrically to propose an appropriate sage speed and distance, which is required to avoid sea accident under the different conditions, such as ship-velocity ratios, ship-length ratios, separation and stagger between ships. The manoeuvring characteristics based on this investigation will be very useful for keeping the safety of navigation from the practical point of ships design and traffic control in confined water.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2606-2613
• /
• 2022

Spent resin often exceeds radiation limits for safe disposal, creating a need for commercial-scale treatment techniques to reduce resin radioactivity. In this study, the radiological safety of a commercialized spent resin treatment device with a treatment capacity of 1 ton/day was evaluated. The results confirm that the device is radiologically safe in the event of an accident. This device desorbs ¹⁴C from the spent resin, allowing disposal as low-level waste instead of intermediate-level waste. The device also reduces overall waste by recycling the extracted ¹⁴C. Potential accident scenarios were explored to enable dose assessments for both internal and external exposure while preventing further spillage of the device and processing the spilled resin. The scenarios involved the development of a surface fracture on the resin mixture separator and microwave systems, which were operated under pressure and temperature of 0-6 bar and 0-150 ℃, respectively. In the case of accidents with separator and microwave device, the maximum allowable working time of worker were derived, respectively, considering external and internal exposures. When wearing the respirator corresponding to APF 50, in the case of the microwave device accident scenario, the radiological safety was confirmed when the maximum worker worked within 132.1 h.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1025-1026
• /
• 2008

The level crossing collision accident which comprises more than 90 percent of all level crossing accidents is one of the most serious safety problems. There is a critical need for providing safe strategy and is focusing on the level crossing information rather than measures at a grade crossing. This study is intended to develop technology for accident prevention and damage reduction based on accident cases analysis result and improvement direction to complement shortcomings of safety equipment of conventional level crossing and to establish safety of travelers(train, motor vehicle, person).

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.4
• /
• pp.1-7
• /
• 2021

Although the working environment has changed significantly compared to the past, such as the implementation of the five-day work week and the aging of the population, it is not reflected in the current industrial accident index calculation such as frequency rate, severity rate, and safe T-score. In this study, statistical data were used to understand time-series trends such as increase in life expectancy, working age, shortening of working hours, and average age of death by accident. As a result of time series trend analysis of statistical data, life expectancy increased to 83.3 years, and the legal working age was raised to 65 years due to the aging of the population. Also, with the advent of the 5-day work week since 2001, the average annual working hours decreased to 2008.1 hours. It can be confirmed through statistical data that these phenomena are applied to the current working environment due to a complex action, and these environmental changes affect the calculation results of the industrial accident index.

• Journal of Navigation and Port Research
• /
• v.27 no.3
• /
• pp.247-252
• /
• 2003

This paper is mainly concerned with the assessment of safe navigation between ships moving each other in restricted waterways. The numerical simulation of manoeuvring motion was conducted parametrically to propose an appropriate safe speed and distance, which is required to avoid sea accident under the different conditions, such as ship-velocity ratios, ship-length ratios, separation and stagger between ships. As for the calculation parameters, the ratios of velocity difference between two ships were considered as 0.6, 1.2, 1.5 and the ones of ship-length difference were regarded were regarded as 0.5, 1.0, 1.18. From the inspection of this investigation, it indicates the following result. Firstly, the separation between ships is more needed for the small vessel, compared to the large vessel. Secondly, the lateral distance between ships is necessarily required for the velocity ration of 1.2, compared to the cases of 0.6 and 1.5. The manoeuvring characteristics based on this investigation will be very useful for keeping the safety of navigation from the practical point of ships design and traffic control in confined water.

• Journal of the Korean Institute of Gas
• /
• v.3 no.2 s.7
• /
• pp.24-33
• /
• 1999

The minimum safe separation distances from LPG filling station was discussed in this work based on the accident data from 1987 to 1998 in south korea, the initial damage of accident, and standards of countries. The safety distances are adequate to reduce ignition probability by released gas and provide space for implementation of emergency response after ignition. Therefore, the distances are related to the distance to LFL(Lower Flammable Limit) and the length of jet fire to prevent accident escalation. The range of the distance was suggested in this work to make standard with considering economic, culture, and safe guards.