• 제목/요약/키워드: Sa 2.5 Gr

검색결과 9건 처리시간 0.021초

열처리된 SA508 합금에서의 초음파 비선형성 측정: 결정립과 석출물 영향 (Ultrasonic Nonlinearity Measurement in Heat Treated SA508 Alloy: Influences of Grains and Precipitates)

  • 백승현;이태훈;김정석;장경영
    • 비파괴검사학회지
    • /
    • 제30권5호
    • /
    • pp.451-457
    • /
    • 2010
  • 본 연구에서는 합금강의 미세조직 특성인 결정립과 석출물이 초음파 비선형성에 미치는 영향을 실험적으로 연구하였다. 원자로 압력용기 재료인 SA508 Gr.3 저합금강을 오스테나이징과 템퍼링 조건을 변화시켜 모상의 오스테나이트 결정립 크기와 석출물 크기를 제어하였다. 결정립과 석출물 모두 크기가 조대해 짐에 따라 초음파 비선형 파라미터는 낮아지는 경향을 보이므로 초음파 비선형성이 결정립과 석출물과 밀접한 상관성이 있음을 알 수 있었다. 모상의 오스테나이트 결정립이 성장하더라도 패킷과 래스 하부업계의 영향으로 초음파 비선형 파라미터는 큰 변화를 보이지 않았다. 석출물의 영향으로 석출물의 크기 외에 정합변형을 일으키는 $Mo_2C$의 감소로 인해 초음파 비선형 파라미터가 큰 감소를 나타내었다. 본 연구결과 초음파 비선형성을 측정하므로써 결정립과 석출물의 미세조직 특성을 평가하는 것이 가능하다.

원전 기동시 2차측 수질 환경에서 SA106 Gr.B와 Alloy 690 재료에 미치는 고분자 아크릴산 농도 영향 (Effect of Polyacrylic Acid Concentrations to the SA106 Gr.B and Alloy 690 Materials at the Startup Environments of Secondary Water Chemistry of NPP System)

  • 권혁철;이두호;성기방
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2014년도 추계학술대회 논문집
    • /
    • pp.118-119
    • /
    • 2014
  • 원전 운전 중 2차계통 구성재료가 부식되어 철 산화물이 증기발생기 내부로 유입된다. 유입된 철산화물은 고온고압의 환경에서 침적되어 슬러지가 된다. 침적된 슬러지는 증기발생기 전열관 재료에 응력부식균열(SCC)을 일으키는 주원인으로 원전에서는 철 산화물의 유입을 최소화하기 위해 기동전 2차계통을 순환 세정하고 있다. 해외 원전에서는 고분자 아크릴산(Polyacrylic Acid)을 순환세정시 주입함으로써 2차계통 철 산화물 제거 효율을 높인 사례가 있었다. 이에 우리 원전에서도 기동전 순환세정시 고분자 아크릴산을 주입 적용하였다. 고분자 아크릴산 주입 전 필수적으로 이뤄져야할 연구는 고분자 아크릴산이 재료에 미치는 영향평가이다. 본 연구에서는 고분자 아크릴산 농도(1, 10, 100 ppm)에 따라 2차계통 구성재료인 SA106 Gr.B와 Alloy 690의 건전성에 미치는 영향를 수행하였다. 평가방법으로는 전기화학 분극실험, 시편을 침지시켜 실험 전, 후 무게 감량을 이용한 부식률 측정, 표면 상태분석등을 이용하여 종합적으로 평가하였다. 전기화학 분극실험과 부식률 측정결과, 고분자 아크릴산 농도가 높을수록 부식은 증가하였고 고분자 아크릴산 농도 100 ppm일 때 최대 부식률이 0.037 mils로 계산되었다. 이는 부식허용 기준치(5.8 mils)보다는 100배이상 낮았으며 표면분석 결과 고분자 아크릴산으로 인한 pitting 부식은 발생하지 않았다. 이와 같은 결과로 기동시 환경에서 고분자 아크릴산 농도 100 ppm까지는 재료 건전성에 미치는 영향은 거의 없는 것으로 판단된다.

  • PDF

Effect of Retaining Preconsruction Primer (PCP) on the Quality of High Performance Protective Coatings Systems

  • Chung, M.K.;Baek, K.K.;Lee, H.I.;Lee, C.H.;Shin, C.S.
    • Corrosion Science and Technology
    • /
    • 제3권2호
    • /
    • pp.59-66
    • /
    • 2004
  • In construction of new ships and large steel bridges in Korea, pre-construction primers (PCP), also known as shop primer, are routinely used and retained as an integral part of the protective coating system. Retention of PCP's can significantly reduce building schedule and cost. Retaining PCP through the so-called "sweep blasting" procedure eliminates or minimizes the necessity of a second blast operation, thus shortening overall schedule as well as reducing labor cost and hazardous waste disposal cost. This study evaluates the feasibility of retaining PCP as the part of primer for high performance protective coating systems applied to ships' hull, bottom and ballast tanks. Upon proving that the retention of the PCP is a viable option, the process of coating application can he improved significantly in terms of cost and working schedule of new ships and large steel bridges. Results indicate that use of the PCP via sweeping blasting in conjunction with standard high performance protective coating systems does not degrade the overall performance of the coating systems. At the same time, it is also highly recommended that the secondary surface preparation should consist of grit blasting of weld burnt and other damaged areas to SSPC SP-IO grade (Sa 2.5 Gr.), Near White Blast Cleaning with proper application and attention to detail.

Comprehensive investigations of key mitochondrial metabolic changes in senescent human fibroblasts

  • Ghneim, Hazem K.;Alfhili, Mohammad A.;Alharbi, Sami O.;Alhusayni, Shady M.;Abudawood, Manal;Aljaser, Feda S.;Al-Sheikh, Yazeed A.
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제26권4호
    • /
    • pp.263-275
    • /
    • 2022
  • There is a paucity of detailed data related to the effect of senescence on the mitochondrial antioxidant capacity and redox state of senescent human cells. Activities of TCA cycle enzymes, respiratory chain complexes, hydrogen peroxide (H2O2), superoxide anions (SA), lipid peroxides (LPO), protein carbonyl content (PCC), thioredoxin reductase 2 (TrxR2), superoxide dismutase 2 (SOD2), glutathione peroxidase 1 (GPx1), glutathione reductase (GR), reduced glutathione (GSH), and oxidized glutathione (GSSG), along with levels of nicotinamide cofactors and ATP content were measured in young and senescent human foreskin fibroblasts. Primary and senescent cultures were biochemically identified by monitoring the augmented cellular activities of key glycolytic enzymes including phosphofructokinase, lactate dehydrogenase, and glycogen phosphorylase, and accumulation of H2O2, SA, LPO, PCC, and GSSG. Citrate synthase, aconitase, α-ketoglutarate dehydrogenase, succinate dehydrogenase, malate dehydrogenase, isocitrate dehydrogenase, and complex I-III, II-III, and IV activities were significantly diminished in P25 and P35 cells compared to P5 cells. This was accompanied by significant accumulation of mitochondrial H2O2, SA, LPO, and PCC, along with increased transcriptional and enzymatic activities of TrxR2, SOD2, GPx1, and GR. Notably, the GSH/GSSG ratio was significantly reduced whereas NAD+/NADH and NADP+/NADPH ratios were significantly elevated. Metabolic exhaustion was also evident in senescent cells underscored by the severely diminished ATP/ADP ratio. Profound oxidative stress may contribute, at least in part, to senescence pointing at a potential protective role of antioxidants in aging-associated disease.

금강 중류의 식물플랑크톤 군집 동태 이해 (2014~2015) (Phytoplankton Community Structure of Midstream of Geum River on 2014 and 2015)

  • 한사랑;조기철;윤조희;이재정;유순애;최인찬;주현지;천세억;임병진
    • 생태와환경
    • /
    • 제49권4호
    • /
    • pp.375-384
    • /
    • 2016
  • Phytoplankton community is one of the important factors for the management of aquatic environment due to generation of varying toxins by harmful algal species. This study was performed to examine the phytoplankton community structure (PCS) in the midstream of Geum River (GR) from January 2014 to December 2015. The water sampling was performed in five stations on 2014, and three stations on 2015. Subsequently, the morphological identification was performed by microscopic observation in laboratory condition. As results, total 265 species were identified and it was comprised of 40.8% of Bacillariophyceae, 9.1% of Cyanophyceae, 44.5% of Chlorophyceae, and the others (4.9%). During the investigation period, total average standing crop of phytoplankton was $12,948cells\;mL^{-1}$, and it was comprised of $7,702cells\;mL^{-1}$ of Bacillariophyceae, $2,821cells\;mL^{-1}$ of Cyanophyceae, $2,121cells\;mL^{-1}$ of Chlorophyceae, and $305cells\;mL^{-1}$ of others. To verify which tributaries of upstream area influence on PCS of midstream of GR, the phytoplankton standing crops of two stations including Mihocheon (MH) and Gapcheon (GC) were examined on 2014, and compared to result of on 2015. The results were shown that the MH station had more similar phytoplankton standing crops with midstream of GR than GC station. The relationship between environmental parameters and phytoplankton dynamics was studied at the investigated station. As results, whereas water temperature and total phosphorus were represented the positive correlation, N/P ratio was remarkably exhibited negative correlation. From the results, it is suggested that the PCS of midstream of GR was more affected by MH station than GC station, and the changes of temperature, phosphorus concentration, and N/P ratio may be important factors on the PCS formation of midstream of GR.

연성재료의 균열진전에 따른 A2의 변화; 실험적 측정 (Variation of A2 with Crack Propagation in a Ductile Metal; Experimental Evaluation)

  • 김헌중;김동학;양경진;강기주
    • 대한기계학회논문집A
    • /
    • 제27권1호
    • /
    • pp.119-125
    • /
    • 2003
  • A way to measure the second parameter $A_2$of CT specimens is described. The displacement $\delta$$_{5}$ which is measured continuously from visual images of the lateral surface during crack growth is used to calculate the A, as a function of crack growth. The crack length is measured by DCPD(Direct Current Potential Drop) method and the J-resistance curve is determined according to ASTM standard E1737-96. To prove the validity of this method, three dimensional finite element analyses were performed, and variations of the displacements $\delta$$_{5}$ and $A_2$along the thickness were explored. As the result, it has been shown that the $\delta$$_{5}$ measured from the visual images of the lateral surface and the corresponding $A_2$can be regarded as the average through the thickness for 1T and 1/2T specimens of SA106Gr.C steel.steel.

천연정유 Cajuput (Melaleuca cajeputi) 유래 Benzaldehyde의 살초활성 (Herbicidal Activity of Benzaldehyde in Cajuput (Melaleuca cajeputi) Essential Oil)

  • 이사은;윤미선;연보람;최정섭;조남규;황기환;왕해영;김성문
    • 한국잡초학회지
    • /
    • 제30권3호
    • /
    • pp.191-198
    • /
    • 2010
  • 본 연구의 목적은 정유에 함유되어 있는 살초활성물질을 탐색하여 제초제 개발을 위한 선도 화합물을 발굴하는데 있었다. Amyris(Amyris balsamifera), cajuput (Melaleuca cajeputi), geranium(Pelargonium graveolens), lavender(Lavendula spp.), mandarin(Citrus reticulata), pine(Pinus spp.) 및 rosemary(Rosmarius officinale) 정유에 대한 살초력을 유채(Brassica napus)를 대상으로 in vitro에서 수행한 결과, cajuput 정유의 살초력이 가장 높았다($GR_{50}$ 값, $425{\mu}g\;g^{-1}$). Cajuput 정유에 함유되어 있는 주된 생리활성물질들은 eucalyptol 37,2%, ${\alpha}$-terpineol 11.6%, benzaldehyde 5.2%, linalool 4.1%, ${\alpha}$-pinene 2.5%, ${\beta}$-pinene 2.4%이었으며, 이들 생리활성물질의 살초력($GR_{50}$ 값)은 각각 2,731, 500, 50, 372, 4,363, $4,671{\mu}g\;g^{-1}$이었다. Benzaldehyde의 살초력은 기 보고된 eucalyptol (1,8-cineole)과 ${\alpha}$-pinene보다 높았으므로 향후 새로운 제초제 개발을 위한 선도화합물로 활용될 수 있을 것이라 판단된다. Cajuput 정유와 이에 함유되어 있는 가장 높은 살초력을 보였던 benzaldehyde를 80kg $ha^{-1}$ 토양처리하였을 때에는 그 어떠한 살초효과도 관찰할 수 없었으나, 경엽처리 하였을 때에는 화본과 잡초인 수수, 돌피, 바랭이는 100% 고사되었다. 그러나 살초효과는 20kg $ha^{-1}$ 이하에서는 전혀 나타나지 않았는데 이는 cajuput 정유와 benzaldehyde의 높은 휘발성 때문인 것으로 추론된다. 본 연구의 결과 cajuput 정유의 살초효과는 높은 약량에서만 나타났으므로 약량저감을 위한 처리시기 재설정과 살초력을 높일 수 있는 제형개발이 요구된다.

해양구조용강재의 SA용접부에서 입열량이 파괴인성에 미치는 영향에 관한 실험적 연구 (The Effect of Heat Input on Fracture Toughness(CTOD) in Submerged Arc Offshore Steel Weldments)

  • 강성원;김명현;신용택;이해우
    • 대한조선학회논문집
    • /
    • 제41권6호
    • /
    • pp.40-47
    • /
    • 2004
  • The influence of heat input on fracture toughness was investigated in SAW weldments, which were prepared at two different welding conditions in API 2W Gr.50 and EN10225 5420. By examining the fracture initiation point, refined areas(ICHAZ and SCHAZ) in weld metal was identified as local brittle zone, in which M-A constituents and coarsed grain size were observed. Impact values showed the most significant difference at root portion, and CTOD transition temperature was related with impact values obtained at root portion. Hardness values in refined area were less than columnar microstructure about 20 HV5.

재료 동적영향을 고려한 주냉각재 배관 LBB 적용시 Dynamic Strain Aging의 영향 분석

  • 양준석;박치용;정우태;유기완;김진원
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 1998년도 춘계학술발표회논문집(2)
    • /
    • pp.305-311
    • /
    • 1998
  • 최근들어 고려된 LBB(Leak Before Break) 적용요건중 동적파괴시힘 절차에는 울진 3&4호기 이후 파단전누설개념이 적용되는 배관이 탄소강으로 제작될 경우. 이 배관이 Dynamic Strain Aging (DSA)에 의해 파괴저항치가 감소되지 않는다는 것이 정량적으로 입증되지 않는 한, 동 배관의 파괴 물성치 결정시 DSA의 영향이 고려되어야 하며, DSA 영향을 평가하기 위해서는 동적과괴시험이 수행되어야 함을 요건화 하고 있다. 본 연구에서는 DSA 효과에 의한 파괴저항(J-R) 특성의 저하가차세대원전 원자로냉각재배관 파단전누설개넘(LBB) 적용시 설계 안전여유도에 영향을 미치지 않는 정도임을 평가하는데 있다. 따라서 ASME Section III에서 탄소강으로 분류하고 있는 강종별 파괴인성 변화를 고찰하고, 차세대원전 주냉각재배관 재료인 SA508 Class la의 최대 파괴인성 감소치를 예측하여, 울진 3&4호기에서 측정된 엘보우용 SA516-Gr.70 강의 DSA 영향 평가 결과와 비교 분석하여 차세대원전 주냉각재배관의 DSA영향을 평가하였다. 도출된 결론으로는 DSA 영향을 고려한 SA508 Class la의 J 및 dJ/dA 값은 극히 보수적으로 추정할 때 50% 이상 감소하는 것으로 예측된다. 이러한 DSA 영향을 고려하였을 경우 배관재 모재의 파괴인성치는 Weld-SAW의 J/T 값 수준으로 감소하였다. 그러나 현 LRB 해석이 가장 낮은 J/T값을 갖는 Weld-SAW Auto의 균열길이 2a인 J/T선도에 의거하여 수행되고 있다는 점을 고려한다면 비록 DSA가 배관재에 영향을 주는 가장 보수적인 값(J 및 dJ/dA값을 50% 이상)을 사용한다고 하더라도 차세대원전 LBB 적용에 문제가 되지 않음을 알 수 있다. 즉 차세대원자로 주냉각재배관에 LBB를 적용하는데는 DSA 영향은 상대적으로 중요하지 않다는 결론을 얻었다. 표면에 수소화물이 농축되어 있는 hydride layer가 형성됨을 관찰하였으며 ~5,000ppm 이상의 경우에는 수소화물의 방향성이 random하였으며 특히, ZIRLO$^{TM}$ 시편의 경우에서는 원주방향으로 길게 이어진 수소화물과 기계적 성질에 치명적인 반경방향의 수소화물이 평행하게 배열된 것을 관찰하였다.하였을 때는 Li$_2$O의 첨가에 의해 치밀화가 주로 일어났고, 반면에 $N_2$-7vol.%H$_2$ 분위기에서 소결하면 Li$_2$O의 첨가에 의해 작은 기공은 소멸되고 큰 기공이 생성되었다.지나치게 모국어의 영향만 강조하고 다른 요인들에 대해서는 다분히 추상적인 언급으로 끝났지만 이 분석을 통 해서 배경어, 목표어, 특히 중간규칙의 역할이 괄목할 만한 것임을 가시적으로 관찰할 수 있 다. 이와 같은 오류분석 방법은 학습자의 모국어 및 관련 외국어의 음운규칙만 알면 어느 학습대상 외국어에라도 적용할 수 있는 보편성을 지니는 것으로 사료된다.없다. 그렇다면 겹의문사를 [-wh]의리를 지 닌 의문사의 병렬로 분석할 수 없다. 예를 들어 누구누구를 [주구-이-ν가] [누구누구-이- ν가]로부터 생성되었다고 볼 수 없다. 그러므로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elements)로 가정한다. 즉, [+wh] 의미의 겹의문사는 동일한 구성요 소를 지닌 병렬적 합성어([$[W1]_{XO-}$ $[W1]_{XO}$ ]$_{XO}$)로

  • PDF