• Title/Summary/Keyword: SWMM5.0

Search Result 56, Processing Time 0.026 seconds

Flood Inundation Analysis using XP-SWMM in the coastal Urban Area (XP-SWMM을 이용한 해안 도시지역 침수해석)

  • Mun, Myung-Jin;Kim, Ji-Hyeon;Lee, Nam-Joo;Kim, Tae-Won
    • Proceedings of the Korea Contents Association Conference
    • /
    • 2013.05a
    • /
    • pp.97-98
    • /
    • 2013
  • 최근 빈번하게 발생하고 있는 국지성 집중호우로 인한 해안 도시지역의 내수침수 원인 및 면적을 XP-SWMM 모형을 이용하여 분석하였다. 이 연구의 대상은 해안과 인접한 지역이며, 유역의 면적은 $2.74km^2$이고 관로의 총연장은 11.20km이다. 대상지역을 32개의 소유역과 67개의 하수관로로 XP-SWMM 모형의 입력자료를 구축하였다. 대상유역에 대한 강우분석을 수행하여 2년, 5년, 10년, 20년, 30년, 50년 빈도의 강우량을 결정하였으며, 각 빈도의 강우사상에 대하여 조위조건을 반영한 침수해석을 수행하였다. 우수관거시스템과 연계된 TUFLOW 흐름모형을 이용하여 침수범람지역을 모의하였다. 모의 결과 모든 빈도에 대하여 내수침수 현상이 발생하는 것으로 나타났으며, 빈도별로 최대침수심은 0.485~0.673m, 침수면적은 $88,600{\sim}230,700m^2$로 예측되었다. 대상유역의 침수발생 양상은 하수관로의 유량이 맨홀을 통해 지표면으로 분출되는 현상이 발생하며, 이 지역의 하류로 침수범위가 확대되는 것으로 나타났다. 이런 현상은 상류에 위치한 소유역의 우수 유출량을 집수하는 집수정의 용량과 하류로 유하시키는 우수관로의 통수단면이 부족한 것을 주요 원인으로 생각할 수 있다.

  • PDF

Inundation Analysis on the Region of Lower Elevation of a New Port by Using SWMM5 and UNET Model - Yongwon-dong, Jinhae-si (SWMM5와 UNET 모형을 이용한 신항만 저지대 침수분석 - 진해시 용원동)

  • Lee, Jung-Min;Lee, Sang-Ho;Kang, Tae-Uk
    • Journal of Korean Society on Water Environment
    • /
    • v.24 no.4
    • /
    • pp.442-451
    • /
    • 2008
  • We analyzed characteristics of rainfall-runoff for the channel of Yongwon area made by a new port construction. And we conducted inundation analysis on the region of lower elevation near the coast. SWMM5 was calibrated with the storm produced by the typhoon Megi from August 19 to August 20 in 2004, and was verified with the storm from August 22 to August 22 in 2004. We performed hydraulic channel routing of Yongwon channel about typhoon Megi from August 19 to August 20 in 2004 by UNET model which is a hydraulic channel routing. The simulated runoff hydrographs were added to the new stream as lateral inflow hydrographs and a watershed runoff hydrograph was the upstream boundary condition. The downstream boundary condition data were estimated by the measured stage hydrographs. The maximum stage that was calculated by hydraulic channel routing was higher than the levee of inundated region in typhoon Megi. Thus we can suppose an inundation to have been occurred. We performed inundation analysis about typhoon Megi from August 19 to August 20 in 2004 and flood discharge of return period 10~150 years. And we estimated each inundation area. The inundation areas by return periods of storms were estimated by 3.4~5.7 ha. The causes of inundation are low heights of levee crests (D.L. 2.033~2.583 m), storm surges induced by typhoons and reverse flow through the coastal sewers (D.L. -0.217~0.783 m). A result of this study can apply to establish countermeasure of a flood disaster in Yongwon.

Estimation for Watershed pollutant loading with SWMM (SWMM 모형을 이용한 유역의 오염부하량 산정)

  • 전지홍;윤춘경
    • Proceedings of the Korean Society of Agricultural Engineers Conference
    • /
    • 1999.10c
    • /
    • pp.689-694
    • /
    • 1999
  • This study estimated average yearly watershed pollutant loading by using SWMM(Storm Water Management Model) which is one of the nonpoint source quality models. Two sites were measured discharge and water quality at dry period and wet period. The rainfall data is used from 1989 to 1998 . During a decade, the average year watershed pollutant loading, which is SS, BOD5 , TN, TP, were 2.39E+06kg, 0.92E +05kg, 2.53E+05kg, 2.66E+04kg respectively. During dry period, SS, BOD5 TN, TP loadings were 1.89E+05kg, 1.7E+05kg, 1.04E+05kg, 1.11E+04kg, and during wet period 1.89E+05kg, 1.17E+05kg, 1.04E+05kg, 1.11E+04kg respectively so wet period loading are more than dry day loadings.

  • PDF

Analysis of Runoff Reduction with LID Adoption using the SWMM (SWMM을 이용한 춘천 거두 1지구의 LID 개념 적용으로 인한 유출 감소 특성 분석)

  • Park, Junho;Yoo, Yonggu;Park, Youngkon;Yoon, Heetaek;KIm, Jonggun;Park, Younshik;Jeon, Ji-Hong;Lim, Kyoung Jae
    • Journal of Korean Society on Water Environment
    • /
    • v.24 no.6
    • /
    • pp.806-816
    • /
    • 2008
  • In recent years, increases in impervious areas with rapid urbanization and land use changes are causing numerous hydrologic and environmental problems. In this study Low Impact Development (LID) was applied to investigate changes in runoff and peak runoff with LID plans. SWMM 5.0 was used to simulate LID Integrated Management Practices (IMPs) at study area. The SWMM estimated total runoff volume with conventional land use planning is (82.3%, 46.44 mm), (99%, 73.16 mm) greater than total runoff before urbanization, while total runoff with LID is (11.1%, 46.44 mm), (49%, 73.16 mm) greater than those before urbanization. With the LID adoption in land use planning, pervious area increases by 49.8% compared with that from the conventional urban land use planning, resulting in (32.7%, 46.44 mm), (23.6%, 73.16 mm) decrease in total runoff, and (32.6%, 46.44 mm), (18.5%, 73.16 mm) decreases in peak rate runoff. The results obtained from this study indicate that peak rate runoff, time to peak, and total runoff can be reduced with the LID in urban land use planning because the LID secures pervious areas with various LID IMPs. The SWMM simulated result using design storm data and the US EPA suggested CN values for various LID IMPs implies that how environment-friendly urban land use planning with the LID adoption is important for sustainable development at urbanizing watershed.

A Study on Optimal Flood Runoff Model for Urban Flood Forecasting (도시홍수예보를 위한 최적의 홍수유출모형에 대한 연구)

  • Yuk, Gi Moon;Chun, Soo Bin;Kim, Min Seok;Moon, Young Il
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.379-379
    • /
    • 2017
  • 과거에는 하천 범람으로 인한 홍수피해가 많았으나 최근에는 도시화로 인한 불투수면적의 증가로 홍수도달시간의 단축 및 노면수의 배수불량으로 인한 내수 홍수피해가 많아졌다. 이러한 변화는 도시하천의 홍수예보에 밀접한 관련이 있으며 관련된 분석 모형 및 연계방안 또한 매우 중요하게 되었다. 일반적으로 하천에 대한 유출해석 모형으로 HEC-RAS((Hydrologic Engineering Center-River Analysis System)가 주로 사용되고 있으나 현재와 같이 도심지 하천에서는 내배수의 특성을 고려한 SWMM(Storm Water Management Model)을 사용한다. 또는 이 두모형의 연계를 통해 유출해석을 진행하기도 한다. 최근 HEC-RAS와 SWMM모형이 최신 버전을 공개하였다. HEC-RAS의 경우 2016년 9월 5.0.3버전을 출시하며 1D뿐만 아닌 2D의 모의도 가능하도록 기능을 개선하였으며 SWMM의 경우 2016년 09월 07일 5.1.011버젼이 공개되었다. 본 연구에서는 공개된 최신 모형을 도림천 지역에 적용하여 도림천 지역에 적합한 모형 및 연계 방법을 찾아보려 한다. 이를 통해 최적의 도시홍수예보 시스템을 구성하기 위한 모형 및 연계방안의 조사와 가장 합리적인 도시홍수 시스템의 구성방안을 제시하고자 한다.

  • PDF

Evaluation of Water Cycle Improvement in LH Institute Using SWMM-LID Model (SWMM-LID 모델을 이용한 토지주택연구원의 물순환 개선효과 평가)

  • Jung, Jong-Suk;Jung, Kwang-Wook;Kang, Suman;Hyun, Kyong-Hak
    • Journal of Korean Society on Water Environment
    • /
    • v.34 no.3
    • /
    • pp.308-315
    • /
    • 2018
  • SWMM-LID was calibrated with flow monitoring data in LHI to evaluate runoff after LID application. The flow rate in the B basin was estimated to be 0.94 and 6.15 for O/S and $D_v$, respectively. In the A and C basins, the difference between the observed and simulated data was greater than in the B basin. As a result of runoff reduction efficiency by the application of LID facilities, the change of infiltration increased from 34.6 % to 45.8 % in the entire watershed, and the runoff decreased from 58.8 % to 46.3 %. In the runoff reduction of each LID facility, rain garden E showed the highest effect with 99.9 % and bioretention B showed the lowest effect with 27.5 %. In order to evaluate the efficiency of each LID facility, a comparison is made between the pore volume (V) of the LID and the catchment area (A). The runoff showed a runoff reduction effect of about 70 % above the 0.1 volume/area (V/A) value. As a result of examining the runoff reduction with LID facilities by the LID module of SWMM, a reasonable design is possible by reflecting the appropriate LID volume to drainage area.

Performance Evaluation of the Runoff Reduction with Permeable Pavements using the SWMM Model (SWMM 분석을 통한 투수성 포장의 유출 저감 특성 평가)

  • Lin, Wuguang;Ryu, SungWoo;Park, Dae Geun;Lee, Jaehoon;Cho, Yoon-Ho
    • International Journal of Highway Engineering
    • /
    • v.17 no.4
    • /
    • pp.11-18
    • /
    • 2015
  • PURPOSES: This study aims to evaluate the runoff reduction with permeable pavements using the SWMM analysis. METHODS: In this study, simulations were carried out using two different models, simple and complex, to evaluate the runoff reduction when an impermeable pavement is replaced with a permeable pavement. In the simple model, the target area for the analysis was grouped into four areas by the land use characteristics, using the statistical database. In the complex model, simulation was performed based on the data on the sewer and road network configuration of Yongsan-Gu Bogwang-Dong in Seoul, using the ArcGIS software. A scenario was created to investigate the hydro-performance of the permeable pavement based on the return period, runoff coefficient, and the area of permeable pavement that could be laid within one hour after rainfall. RESULTS : The simple modeling analysis results showed that, when an impervious pavement is replaced with a permeable pavement, the peak discharge reduced from $16.7m^3/s$ to $10.4m^3/s$. This represents a reduction of approximately 37.6%. The peak discharge from the whole basin showed a reduction of approximately 11.0%, and the quantity decreased from $52.9m^3/s$ to $47.2m^3/s$. The total flowoff reduced from $43,261m^3$ to $38,551m^3$, i.e., by approximately 10.9%. In the complex model, performed using the ArcGIS interpretation with fewer permeable pavements applicable, the return period and the runoff coefficient increased, and the total flowoff and peak discharge also increased. When the return period was set to 20 years, and a runoff coefficient of 0.05 was applied to all the roads, the total outflow reduced by $5195.7m^3$, and the ratio reduced to 11.7%. When the return period was increased from 20 years to 30 and 100 years, the total outflow reduction decreased from 11.7% to 8.0% and 5.1%, respectively. When a runoff coefficient of 0.5 was applied to all the roads under the return period of 20 years, the total outflow reduction was 10.8%; when the return period was increased to 30 and 100 years, the total outflow reduction decreased to 6.5% and 2.9%, respectively. However, unlike in the simple model, for all the cases in the complex model, the peak discharge reductions were less than 1%. CONCLUSIONS : Being one of the techniques for water circulation and runoff reduction, a high reduction for the small return period rainfall event of penetration was obtained by applying permeable pavements instead of impermeable pavement. With the SWMM analysis results, it was proved that changing to permeable pavement is one of the ways to effectively provide water circulation to various green infrastructure projects, and for stormwater management in urban watersheds.

Inundation Analysis in Urban Area Considering of Head Loss Coefficients at Surcharged Manholes (과부하 맨홀의 손실계수를 고려한 도시지역 침수해석)

  • Lee, Won;Kim, Jung Soo;Yoon, Sei Eui
    • Journal of Korea Water Resources Association
    • /
    • v.48 no.2
    • /
    • pp.127-136
    • /
    • 2015
  • In general, XP-SWMM regards manholes as nodes, so it can not consider local head loss in surcharged manhole depending on shape and size of the manhole. That might be a reason why XP-SWMM underestimates inundated-area compared with reality. Therefore, it is necessary to study how we put the local head loss in surcharged manhole in order to simulate storm drain system with XP-SWMM. In this study, average head loss coefficients at circular and square manhole were estimated as 0.61 and 0.68 respectively through hydraulic experiments with various discharges. The estimated average head loss coefficients were put into XP-SWMM as inflow and outflow energy loss of nodes to simulate inundation area of Gunja basin. Simulated results show that not only overflow discharge amount but inundated-area increased considering the head loss coefficients. Also, inundation area with considering head loss coefficients was matched as much as 58% on real inundation area. That was more than simulated results without considering head loss coefficients as much as 18 %. Considering energy loss in surcharged manholes increases an accuracy of simulation. Therefore, the averaged head loss coefficients of this study could be used to simulate storm drain system. It was expected that the study results will be utilized as basic data for establishing the identification of the inundation risk area.

A Study on Best Management Practice for Detention Pond Design in Small Urban Catchment (도시 소유역의 저류지 설계에 관한 최적 관리기술 연구)

  • Park, Woong-Seo;Jang, Suk-Hwan;Ryu, Keun-Joon;Shin, Cheol-Shik
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2008.05a
    • /
    • pp.832-836
    • /
    • 2008
  • 우리나라는 하절기에 강우가 집중되고 있으며, 집중호우에 대한 도시 호우 피해사례가 최근 빈번히 발생하고 있다. 도시지역의 홍수유출량 저감 방안연구의 중요성에 대한 인식과 그 필요성이 절실한 상태이며, 그에 따라 본 연구에서는 대상 유역에 BMP를 적용한 저류지를 설치하여 첨두유량과 첨두시간의 저감 및 지체효과를 분석하고, 그 결과를 효율적으로 활용하고자 한다. 대상의 모형은 SWMM 5.0(Storm Water Management Model 5.0)을 이용하여 모델링 하였으며, 강우자료는 건설교통부 관할 의정부관측소의 1975년에서 2004년까지의 시강우자료를 바탕으로 24시간 Huff분포형을 산정하여 모형에 적용하였다. 대상 유역에 저류지 설치 전과 BMP가 적용된 저류지 설치 후, 그리고 BMP가 적용되지 않은 저류지 설치 후를 상호 비교하여 BMP저류지의 효과를 분석하였다.

  • PDF

A study on the reasonable standard of Max. flow in a pipe for designing the best Pipe network (우수관 설계를 위한 관내 최대유속기준 타당성 검토에 관한 연구)

  • Lee, Jung-Min;Kim, Young-Jin;Park, Jong-Pyo;Hyun, Kyoung-Hak
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2010.05a
    • /
    • pp.1696-1700
    • /
    • 2010
  • 현재 국내에서 적용하고 있는 관내 최대유속기준 3.0m/s의 타당성을 평가하고자 SWMM 모형을 이용하여 최대유속 적용기준에 대한 우수관거 수리분석 연구를 수행하였다. 강우시 모니터링 지점의 우수유입에 따른 관내 실측결과와 검 보정을 통하여 모형을 구축하였으며, 설계빈도(10년 빈도) 홍수 유입시 관내 수리특성을 분석하였다. 관 최적 설계안 수립을 위한 관거 모델링 수행을 통해 관 경사, 조도계수 변화에 따른 관내 최대유속 민감도 분석을 수행하고 최대유속 기준 변화에 따른 최적설계안을 제시하였다. 일반적으로 우수관거 수리계산시 실무에서는 MAKESW 프로그램을 사용하고 있다. 본 연구에서는 MAKESW가 반영하지 못하는 호우시 관거내 유속, 유량변화 시계열을 SWMM 모형을 통하여 우수관거 수리분석을 수행하였다. 실제 사업지구의 경우 MAKESW를 이용하여 설계된 관내 최대유속이 3.0m/s 이하 일지라도 월류, 압력류, 배수영향을 종합적으로 고려하는 SWMM 모형의 수행결과는 일부 관거에서 설계기준 이상의 유속이 발생하는 것으로 나타났다. 설계빈도 홍수량 유입시 관 경사, 조도계수 변화에 따른 관거 내 최대유속 민감도 분석을 수행한 결과, 관 경사가 5‰ 증가할 때 관내 최대유속은 약 4~26% 증가했으며, 관경사가 완만한 경우 관 경사 증가에 따른 최고유속의 증가 민감도는 더 커졌다. 관 조도계수에 따른 최고유속 분석결과 관 조도계수가 0.005 커질 때 최고유속은 약 30% 증가하는 것으로 분석되었다. 현재 국내의 최대 유속기준을 준수하려면 규정보다 훨씬 많은 맨홀 또는 암거의 낙차공을 설치해야 하기 때문에 공사비 증대를 초래할 수 있다. 아직 기본적인 연구단계지만 본 연구결과와 보완연구를 통하여 최적의 관내 최대유속 기준조건을 우수관거 설계계획에 반영한다면 공사비 절감, 공기단축 등의 효과가 있을 것으로 판단된다.

  • PDF