• Journal of Information Technology Services
• /
• v.11 no.4
• /
• pp.295-308
• /
• 2012

Software and Systems Product Line(SSPL) is a paradigm that has been developed and applied by European Union(EU) to achieve the productivity and competitiveness of EU industries on the world market. It is not just a simple system or software development methodology, but a sophisticated technology requiring capabilities for a high level of mass customization, platforms, processes and convergence of software and systems. EU has applied SSPL for the five selected industrial sectors including aerospace, automobile, medical equipment, consumer electronics and telecommunication equipment since 1990s and led the way to other industry sectors to stimulate the application of SSPL from 2006. In order for Korea to secure competitiveness in the manufacturing and service industries in the competitive borderless market, it is essential to gain the high level of capabilities for software development and convergence of software and systems. SSPL can be a powerful means to achieve this end. This paper discusses the paradigmatic concept of SSPL, how EU's major industries and companies have secured competitiveness through SSPL, key capabilities that are necessary for successful institutionalization of SSPL in Korea, and finally suggestions on core strategies to materialize the benefits of SSPL for Korea.

• Journal of Advanced Navigation Technology
• /
• v.13 no.3
• /
• pp.319-326
• /
• 2009

In this paper, the key technologies of Navigation receiver for GNSS sensor station are presented as a development result of a GNSS ground station in ETRI. A wide-band antenna and RF/IF components and SW signal processing unit to cover the GPS and Galileo signals for GNSS receiver are developed and its performance is verified by using GPS live signal and GNSS RF signal simulator from SpirentTM. We also gather GIOVE-A signal by using H/W antenna and RF/IF units in IF-level as sampling frequency and bit number, 112MHz and 8bits, respectively by using the developed wide-band antenna and RF/IF components. Data acquisition is done by using commercial data acquisition device from National Instrument TM. The gathered data is fed into SW receiver to process Galileo E1 to verify Galileo signal processing by Galileo live signal from GIOVE-A.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.118-126
• /
• 2010

The fibrous material fraction as a by-product from the commercial aloe vera gel processing was obtained and freeze dried. The physicochemical characteristics such as the proximate composition, crystalline/surface structures and several physical functionalities including the water holding capacity (WHC), swelling capacity (SW), oil holding capacity (OHC), emulsion/foam properties and viscosity properties of this powdered sample (100 mesh) were investigated and analyzed by comparison with commercial $\alpha$-cellulose as a reference sample. The total dietary fiber content of powdered sample was very high as much as 87.5%, and the insoluble dietary and soluble dietary fiber content ratios were 77.6 and 22.4%, respectively. The FT-IR spectrum of powdered sample showed a typical polysaccharide property and exhibited a x-ray diffraction pattern for cellulose III and IV like structure. SW (8.24${\pm}$0.15 mL/g), WHC(6.40${\pm}$0.19 g water/g solid) and OHC(10.32${\pm}$0.29 g oil/g solid) of freeze dried aloe cellulose were about 3.3, 1.4 and 2 times higher than those of commercial $\alpha$-cellulose, respectively. Aloe cellulose (~2%, w/v) alone had no foam capacity while improved the foam stability of protein solution (1% albumin+0.5% $CaCl_{2}$) by factor of 300%. Emulsion capacity of 2%(w/v) aloe cellulose was about 70% level of 0.5%(w/v) xanthan gum, but its emulsion stability was about 1.2 times higher than that of xanthan gum. Also, aloe cellulose containing CMC (carboxyl methyl cellulose) of 0.3%(w/v) showed a very good dispersity. Aloe cellulose dispersion of above 1%(w/v) exhibited higher pseudoplasticity and concentration dependence than those of $\alpha$-cellulose dispersion, indicating the viscosity properties for new potential usage such as an excellent thickening agent.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.4
• /
• pp.117-129
• /
• 2017

The Purpose of this Study is to Identify the Learning Modules of the National Competency Standard (NCS) Related to the Information Systems Development Curriculum of 4-year Colleges, to Explore the Possibility of Applying NCS to the Curriculum, and to Examine Implications. The Importance of 26 Competency Units in the Applied SW Engineering of NCS was Compared by Area Experts Composed of 14 Information Systems Developers and Professors of 7 Universities who Teach Software Engineering Subjects Through the Hierarchical Analysis Process (AHP). The Results of the Study as Follows. First, the Relative Importance of the Competency Elements was in order of 'Confirming the Requirements', 'Checking the UI Requirements', 'Designing the Physical Data Repository', 'Testing Developer Integration', and 'Fixing Developer Defects'. Second, while the Entry and Intermediate Level Developer Group Determined that the Competency Elements Related to the IS Development Implementation Stage is more Important, the Advanced IS Developer Groups Consider the Competency Elements Related to the Theory-oriented Design Stage as Important Competency. In Addition, the Group of College Professors was Found to Choose all the Practical and Theoretical Competency Elements that Two Developers Groups Considered Important. Implications of the Study Suggested that the Job Performance Competence and Quality of Education Related to IS Development can be Enhanced.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.5
• /
• pp.34-42
• /
• 2011

A fiber processing method, which might be an alternative for conventional refining process, was introduced. The method consists of repetitive, gentle, mechanical impacts on fibers, followed by fiber uncurling process. This method was very effective for OCC and BCTMP for increasing WRVs (water retention value) while keeping fiber lengths from shortening. For OCC and BCTMP, gentle mechanical impacts on fibers using Hobart mixer increased breaking lengths and tear strengths simultaneously at fast drainage level, and straightening fibers using kady mill increased those strength properties further. For SwBKP and HwBKP, only mechanical impacts using the Hobart mixer were effective on increasing tensile and tear strength at fast drainage, but there were no further increase by kady mill treatment. The strength increases of BCTMP by this alternative fiber processing method were exceptionally high. An extensive engineering development should be followed to actualize this fiber processing mechanism in an energy-effect way.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.433-440
• /
• 2006

A fiber processing method, which might be an alternative for conventional refining process, was introduced. The method consists of repetitive, gentle, mechanical impacts on fiber, and ensued fiber uncurling process. This method was very effective for OCC and BCTMP for increasing WRVs (water retention value) while keeping fiber lengths from shortening. For OCC and BCTMP, gentle mechanical impacts on fibers using Hobart mixer increased breaking lengths and tear strengths simultaneously at fast drainage level, and straightening fibers using kady mill increased those strength properties further. For SwBKP and HwBKP, only mechanical impacts using the mixer were effective on increasing tensile and tear strength at fast drainage, but not kady mill treatment. The strength increases of BCTMP by this alternative fiber processing method were exceptionally high. An extensive engineering development should be followed to actualize this fiber processing mechanism in an energy-effect way.

• ETRI Journal
• /
• v.38 no.6
• /
• pp.1207-1217
• /
• 2016

The general method of machine learning has encountered disadvantages in terms of the significant amount of time and effort required for feature extraction and engineering in natural language processing. However, in recent years, these disadvantages have been solved using deep learning. In this paper, we propose a mention pair (MP) model using deep learning, and a system that combines both rule-based and deep learning-based systems using a guided MP as a coreference resolution, which is an information extraction technique. Our experiment results confirm that the proposed deep-learning based coreference resolution system achieves a better level of performance than rule- and statistics-based systems applied separately

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.280-284
• /
• 2016

본 연구에서는 Density functional theory(DFT) 계산을 이용하여, $MoS_2$의 Mo와 S를 다른 원자로 치환 했을 때 $2H-MoS_2$ monolayer의 basal plane에서 HER활성을 향상시켰다. 특히 Ge와 Rh를 치환한 경우, ${\Delta}G_H$가 각각 0.03eV, 0,07eV로 최적에 가까운 HER활성이 나타났다. 다른 원자의 치환이 Fermi level 근처의 DOS(density of states)를 높여, ${\Delta}G_H$을 0에 가깝게 낮출 수 있음을 확인하였다. 또한 치환되는 원자의 농도, 그리고 strain을 변화시켜 농도와 strain의 증가에 따른 ${\Delta}G_H$ 감소를 발견했다. 이로써 각치환되는 원자마다, 치환 농도와 strain을 함께 변화시켜 ${\Delta}G_H$을 낮출 수 있었다. ${\Delta}G_H$가 0에 가까운(${\pm}{\pm}0.2eV$ 이내) 원자종류, 치환 농도, strain의 여러 조합을 찾았다.

• Journal of Software Assessment and Valuation
• /
• v.16 no.1
• /
• pp.21-26
• /
• 2020

The completeness appraisal of software is performed in various forms, such as assessing the completion level in the development process, calculating the defect rate, estimating the development cost, and calculating the redevelopment cost. Along with this, the problem that is often dealt with is estimation of the development time. Even in a dispute over completeness due to delays in software development, issues of calculating an appropriate development time required to develop a delivery software or a development time required for change requests are often included in the appraisal request. In this paper, we introduce the procedure and method for estimating the appropriate project time of software development so that the appraiser can be applied to the appraisal work for determining the completeness. The method is based on the manual for calculating the appropriate project period of software development project.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.3
• /
• pp.272-280
• /
• 2021

We research and develop a SW-based virtual testing product that can be commonly used in the design/development of non-communication EW systems before the production of physical test products. Through this study, we have developed M&S technology to improve the accuracy of EW weapon system analysis/design and to verify and predict the performance of EW equipment, and to develop proven engineering module models and model base systems. It proposes a technology to build an EW M&S framework that can flexibly link/integrate various engineering/engage-level EW heterogeneous M&S systems.