• Food Science and Preservation
• /
• v.24 no.5
• /
• pp.647-657
• /
• 2017

This study was carried out to investigate the quality characteristics of vinegars containing jaceosidin and eupatilin using Artemisia argyi H. ethanol extract (AEE). 10% malt extract (ME) and water extract of Artemisia argyi H. (AWE) were also prepared for vinegar production. Three kinds of materials were mixed in the same amount to prepare vinegar as follows; CO (ME, water, 18% edible ethanol), SE (ME, water, and AEE), SW (ME, AWE, and 18% edible ethanol) and SM (ME, AWE, AEE). All samples were fermented by Acetobacter pasteurianus A8 at $30^{\circ}C$ for 25 days and analyzed at 10, 15, 20 and 25 days. The pH decreased significantly during the fermentation. pH was lower in SE and SM than CO and SW. The acidity increased significantly during the fermentation, and was highest in SM (4.44%) at 25 days of fermentation. The concentration of acetic acid was higher than other organic acids for all vinegars. Jaceosidin and eupatilin were not detected in both CO and SW, but both were detected in the SE and SM. At 25 days of fermentation, jaceosidin and eupatilin concentrations in SE and SM were 6.49-6.88 mg/kg and 2.23-2.24 mg/kg, respectively. From these results, we confirmed that production of vinegar containing jaceosidin, eupatilin and phenolic compounds can be prepared by using Artemisia argyi H. edible ethanol extract.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.766-773
• /
• 2021

Chemicals, such as ammunition, are disposable items that cannot be reused because of their operational characteristics. The reliability of the test process and test results are important factors in evaluating the performance of guns and ammunition. The pressure after firing is a crucial value in an acceptance test of guns and ammunition performance; hence, accurate measurements are required. The pressure in the artillery is measured using the copper crusher gauge. The compression amount of copper is converted into a pressure by either a length-pressure conversion table or conversion formula. Therefore, the exact measurement of the squeeze of the copper crusher is related directly to the correct estimate of the pressure. Currently, the pressure is measured manually by the operator, which always includes some human error. In this study, the cause of the measurement error was analyzed, and the automatic measuring system for copper crusher deformation was developed to minimize the error elements. A copper crusher could be measured using the probe sensor and CCD camera, and the Jig for stable positioning was also designed. A designated SW was also developed for the system operating and measurement-analysis. This measuring system through this study may be used for an ammunition stockpile reliability test and gun/ammunition acceptance test.

• Asian Journal of Turfgrass Science
• /
• v.24 no.2
• /
• pp.97-105
• /
• 2010

This study focuses on investigating morphological characteristics and variations level in native zoysiagrasses from costal regions and islands in South Korea. In addition, this were collected to conserve germplasm for the breeding of zoysiagrass. One hundred fifty-nine of native zoysiagrasses were collected from 16 different cities and districts. There were morphological evaluations, including plant height, leaf width, leaf length, leaf angle, seed length(SL), seed width(SW), SL/SW ratio and number of seed per spike in native zoysiagrasses. Type of Z. japonica, Z. sinica, Z. macrostachya and Z. matrella showed significant variations in plant height, leaf length, leaf angle and number of seed per spike depending on where they were collected from. On the other hand, little variation were found in leaf width, seed length, seed width and SL/SW ratio. We have discovered a variety of variations among the investigated traits in hybrid zoysiagrass. These results can be used as basic information for development of zoysiagrass breeding.

• KIISE Transactions on Computing Practices
• /
• v.21 no.7
• /
• pp.506-511
• /
• 2015

IOV is a technology that supports one or more virtual desktops, and can share a single physical device. In general, the virtual desktop uses the virtual IO devices which are provided by virtualization SW, using SW emulation technology. Virtual desktops that use the IO devices based on SW emulation have a problem in which service quality and performance are declining. Also, they cannot support the high-end application operations such as 3D-based CAD and game applications. In this paper, we propose a physical network separation system using Virtual Desktop Service based on HW direct assignments to overcome these problems. The proposed system provides independent desktops that are used to access the intranet or internet using server virtualization technology in a physical desktop computer for the user. In addition, this system can also support a network separation without network performance degradation caused by inspection of the network packet for logical network separations and additional installations of the desktop for physical network separations.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.436-440
• /
• 2008

Evaluating the work process of the organization is necessary to improve efficiency and make high quality of results. As size of construction projects are bigger, it is also applied to design firm. By applying efficient process, design team can reduce rework and waste. To make systematic process and keep a continuous progress, process evaluation is required. On this study, CMMI(Capability Maturity Model Integration) concept is benchmarked. Originally CMMI is suggested to evaluating capability of work process of Soft Ware developing organization by SEI(Software Engineering Institute). From CMMI system, direction of making evaluating method of design project performing team is drove. After worked out the evaluation method of capability maturity of process in design team, it could contribute making progress in the design process and satisfying client.

• Journal of KIISE:Information Networking
• /
• v.30 no.5
• /
• pp.621-630
• /
• 2003

In this paper, we implemented SIP protocol that supports IPv6 and differentiated call processing scheme for NGN(Next Regeneration Network). In NGN, SIP processes call signaling among various application services. A softswitch and SIP server must give priority to sensitive services such as Fax, network management and home networking that require a fast call setup time. Also, the support of IPv6 is needed under consideration of All-IP. We proposed differentiated call processing scheme. The differentiated call processing scheme supports differentiated call processing as priority of service class on call processing in SW server We defined three service classes and use the Flow Label field of the IPv6 header for setting service class. Through the performance analysis, we proved that it improves throughput for call message with the high priority. The result of performance analysis demonstrates that differentiated call processing scheme gives better performance for the service requiring a fast session establishment in NGN.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.25-38
• /
• 2019

This study is to develop a diagnostic model for the effective introduction of smart factories in the manufacturing industry, to diagnose SMEs that have difficulties in building their own smart factory compared to large enterprise, to identify the current level and to present directions for implementation. IT, AT, and OT experts diagnosed 18 SMEs using the "Smart Factory Capacity Diagnosis Tool" developed for smart factory level assessment of companies. They analyzed the results and assessed the level by smart factory diagnosis categories. Companies' smart factory diagnostic mean score is 322 out of 1000 points, between 1 level (check) and 2 level (monitoring). According to diagnosis category, Factory Field Basic, R&D, Production/Logistics/Quality Control, Supply Chain Management and Reference Information Standardization are high but Strategy, Facility Automation, Equipment Control, Data/Information System and Effect Analysis are low. There was little difference in smart factory level depending on whether IT system was built or not. Also, Companies with large sales amount were not necessarily advantageous to smart factories. This study will help SMEs who are interested in smart factory. In order to build smart factory, it is necessary to analyze the market trends, SW/ICT and establish a smart factory strategy suitable for the company considering the characteristics of industry and business environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.186-188
• /
• 2021

The architecture named IDPS is a design concept of web-based integrated platform for heterogeneous naval combat system, which accomplishes efficiency(decreasing complexity) of diagnosis process and reduces time to diagnose system. Each type of surface vessel has its own diagnostic processes and applications, and that means it also requires its own diagnostic engineer(inefficiency in human resource management). In addition, man-based diagnostic causes quality issues such as difference approach of log analysis in accordance with engineer skills. Thus In this paper, we designed integrated diagnostic platform named IDPS with simplified common process regardless of type of surface vessel and we reinforced IDPS with status decision algorithm(SDA) that judges current software status of vessel based on gathered lots of logs. It will enable engineers to diagnose system more efficiently and to use more resources in utilizing SDA-analyzed diagnostic results.

• Journal of the Korean Society of Food Culture
• /
• v.33 no.3
• /
• pp.261-267
• /
• 2018

The sensory characteristics of a rice processed snack for 6 to 12 month old infants were investigated. The microbiological safety of all samples was also tested. The moisture content of snack of the SW snack was 6.33 significantly higher than in the other snacks (p<0.05). The sensory intensities of RW were highest in glossiness brightness, uniformity, sweet aroma, savory flavor, sweet flavor, chewiness and crispiness. In the; consumer acceptance test, RW showed significantly higher glossiness, uniformity, sweet aroma, savory flavor, sweet flavor, rancid, chewiness, adhesiveness, crispiness and overall acceptance than the other snacks (p<0.05). The aerobic plate counts were negative in all the samples tested. E. coli and pathogenic microorganisms tests were also negative or not detected, showing that all the samples tested were microbiologically safe according to the food code which applies to food manufacturers. Overall, potentially high value products of rice processed snacks for 6 to 12 month old infants were developed and tested They are expected to be utilized and in the competitive and growing infant food industry.

• Journal of the Korean Geophysical Society
• /
• v.8 no.4
• /
• pp.201-205
• /
• 2005

Turbulent fluxes of heat, water vapor, and CO2 have been measured since August, 2003 at Dasan Station (78o 55’ N, 11o50’E) in the Arctic. These data can allow us to better understand the interactions between the Polar ecosystems and the atmosphere together with those at King Sejong Station in the Antarctic. Due to the buildings and measurement platforms around the flux tower, it is required to evaluate how they influence measured flux data. By using one-year turbulence statistics data and footprint model, flux footprint climatology was analyzed together with data availability. The upwind distance of source area ranged from 150 to 300 m, where the buildings and measurement platforms existed. However, flow distortion due to them may be not a major factor to reduce the data availability significantly. Based on, the dominant wind direction of SW and footprint climatology, the location of flux tower is considered suitable for flux measurement.