• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.366-370
• /
• 1998

Indirect vector control for induction motors requires the use of observers for estimation or observation of rotor flux magnitude and position. In this paper, authors discribe the induction motor vector control and introduce a nonlinear observer, named ELO(extended Luenberger Observer), without simulation results as a preliminary work for trial application. Normally, design of nonlinear observer need coordinate transfromation and linearization through solving the partial different equation. However, ELO requires minimal solution of nonlinear partial differential equation. Simulation was performed by under the enviroment of Matlab and Simulink without the proposed observer because we are still working. Simulation was performed with conventional flux observer, a dc-ac inverter by SVPWM technique, a vector controller armed with multiple PI controllers

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.168-174
• /
• 2001

In this paper, a new space vector RPPWM (Random Position PWM) is proposed. In the proposed RPPWM, each of three phase pulses is located randomly in each switching interval. Based on the space vector modulation technique, the duty ratio of the pulses is calculated. Along with the randomization of the PWM pulses, we can obtain the effects of spread spectra of voltage, current as in the case of randomly changed switching frequency. To verify the validity of the proposed RPPWM, simulation study was tried using Matlab/simulink. The main model described in Simulink block diagrams includes the space vector modulation block, pulse position randomization block, inverter block, 3 phase induction motor block, and so on. By the simulation study, the harmonics of the output voltage, and the current of inverter are predicted in different PWM methods- SVPWM, LLPWM, proposed RPPWM.

• 전력전자학회논문지
• /
• 제6권6호
• /
• pp.525-537
• /
• 2001

본 연구에서는 펄스의 위치를 랜덤하게 함으로써 효율적은 RPWN (Random PWM)을 구현할 수 있는 새로운 공간 벡터 RPPWM(Random Position PWM)방식을 제안하였다. 제안한 방식은 마이크로 컨트롤로 적용하기 쉬운 공간벡터 변조에 의하여 각 상의 듀티비를 연산한 다음, 스위칭 순서를 유지하며 각 3상 펄스들의 위치를 변조구간내에서 임의의 위치에 랜덤하게 배치함으로써 RPWM을 구현하는 방식이다. 제안된 방법의 타당성을 검증하기 위하여 MATLAB/SIMULINK를 이용하여 펄스위치의 랜덤화 공각벡터 변조, 인버터 및 3상 유도전동기를 포함하는 전체 시스템을 모델화하였다. 종전의 공각벡턱 PWM 그리고 제안된 RPPWM에 의한 인버터 출력 전압 전류의 고조파 성분을 시뮬레이션에 의하여 비교 검토하였으며 제안된 방법의 유용성을 입증할 수 있었다.

• Journal of Power Electronics
• /
• 제13권5호
• /
• pp.806-813
• /
• 2013

This paper aims to compare the performance of three phase induction motor drives using Five Leg Inverter (FLI) and Three Leg Inverter (TLI) configurations. An Indirect Field Oriented Control (IFOC) method using a TLI is well established and incorporated for high performance speed drives in various industries. The FLI dual motor drive system on the other hand shows good workability in the independent control of two induction motor drives simultaneously. In this experiment, the IFOC method is utilized for both drive systems, and Space Vector Pulse Width Modulation (SVPWM) is used to generate pulses for both inverters. For the FLI, the Double Zero Sequence (DZS) Injection technique is used to generate the modulation signal. The complete experiment setup is done by using a DSpace 1103 controller board. The individual motor performances are analyzed using similar schemes, equipment setups and controller parameter values. The results show similar speed performance response capability between the single motor operation using a TLI system and the two motor operation using a FLI system based on the variable speed range either in forward or reverse operation. They also show similar load rejection abilities. However, the single motor with a TLI has a better power quality aspect such as ripple current and total harmonics distortion (THD).

• 조명전기설비학회논문지
• /
• 제19권3호
• /
• pp.17-26
• /
• 2005

본 연구에서는 유도전동기 구동 시스템에서 새로운 RPWM 방식을 제안하였다. 유도전동기 구동 시스템에서 발생하는 소음을 줄이기 위하여 공간벡터 RPWM방식에 기반을 둔 RPWM방식을 제안하였다. 제안된 RPWM방식을 드럼 세탁기에 적용하여 세탁기에서 발생하는 소음과 진동을 측정하였으며 그 결과를 비교하였다. 제안된 방식의 타당성을 입증하기 위하여 시뮬레이션과 실험을 수행하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권3호
• /
• pp.249-257
• /
• 2022

In recent years, if we order food by easily accessing the online market with our smartphone, we can receive the product in a fresh state at dawn the next day. Cold chain is an industry that can create high added value because it has both the characteristics of general logistics and sensitivity to temperature. Based on the electrical specifications derived from the reefer container capacity requirement investigation, we proved that power supply to up to 33 reefer containers can be made by using three additional auxiliary power supplies which are applied for freight trains in Korea. In this paper, we conducted a research on a design of power supply system for freight train reefer container based on simulation as a basic research necessary for low-temperature distribution and cold chain construction based on the reefer container railroad. Consequently, the simulation was conducted using the three-phase inverter diagram in PSIM and the SVPWM (3-harmonic injection method) control technique, and it was verified that the required power voltage was satisfied with 622V_dc, which is lower than the input voltage of general SPWM of 718V_dc. The details of this paper could be used as a foundational study for constructing cold chains based on a reefer container dedicated to freight trains in the future.